SWAP-C FPGAs for Aerospace And Defense

Meet mission requirements with low power and high reliability Lattice FPGAs

Accelerate design cycles, reduce system costs and future proof designs with programmable solutions . With 40 years of heritage in delivering low power, high reliability programmable solutions, Lattice Semiconductor has a rich history of delivering SWAP-C optimized FPGA solutions focused on avionics, defense electronics and space.

  • Industry leading low power FPGAs to meet thermal constraints and rugged application requirements
  • Innovative silicon and software solutions to meet domain specific safety, security and reliability requirements
  • World’s largest volume FPGA vendor with a robust supply chain built for assurance and longevity

Key Lattice FPGA Features & Benefits

  • Low power FPGAs that scale up to 637k System Logic Cells and up to 28 instances of 25Gbps Serdes optimized for edge connectivity and signal processing
  • Industry leading advanced security features including AES256-GCM, ECDSA 256-521 & RSA 2048-4096 with post quantum resilience, anti-tamper and hardened PUF to secure bitstream and protect user data during run-time
  • Lowest soft error rate, latchup immunity and industry leading fast and secure boot and reconfiguration independent of configuration bit technology
  • Design tools offer latest advancements in scripting, design partioning, timing analysis, high speed interface debug and third party tools integration for synthesis including TMR, simulation and verification

Jump to

Example Applications

Secure Synchronization with Compliant 1588 PTP

High precision 1588 PTP time, frequency and phase synchronization, Supports secure authentication, message integrity and replay attack protection, Instant-on performance with better than Class C timing accuracy ,Complete customizable hardware and software solution to enable distributed architecture.

Guidance Systems

  • Programmable system integration with 5Gbps transceivers, embedded memory, DSP and MCU
  • Sensor fusion, any-to-any connectivity and embedded vision

Chain of Trust Implementation

  • Hardware Root-of-Trust is the first link in chain that protects mission critical compute and communication platforms
  • Hardened device configuration engine cryptographically authenticates MachXO3D’s configuration image at power-on
  • Embedded security block provides cryptographic functions to authenticate other platform firmware at power-on

Mixed Reality Head-Mount Display

  • Small form factor packaging to meet stringent signal processing requirements
  • Flexible interfaces to sensors, analog and RF front-ends

FPGAs Best Suited for Defense

  • Certus-NX
    Certus-NX is Built on Lattice Nexus platform with Up to 4x lower power vs. similar FPGAs and Up to 100x higher reliability based on 28 nm FD-SOI technology solves the most challenging problems in leading edge defense platforms.
  • CrossLink-NX
    The Crosslink-NX with low soft error rate and lowest power in its class enables efficient processing, bridging and management capabilities to solve challenging problems in Software Defined Radios, Guidance Systems and Unmanned Aerial Vehicle (UAV).
  • MachXO3D
    The MachXO3D is the root of trust enabler with all required features onboard on a monolithic silicon with small footprint and low power that could be deployed in systems of all sizes, offering the most compact solution for untrusted supply chain.

Leaded Package Overview

Lattice offers leaded packaging services to eliminate the risk for tin-whisker and to improve reliability in presence of high shock and vibration applications.

Lattice Packages Wirebond Flip Chip
Wafer Pad or Bump Lead free Lead free
Substrate bump or pad finish Lead free Lead free
Caps No Caps No Caps
Substrate Solder Balls Leaded Leaded
Package Reflow Leaded Leaded

Known Good Die Product Overview

Lattice offers a wide variety of known good die products, tested to full data sheet specification within the specified temperature range with full traceability for each die shipped.

Family Logic Density Test Method Programmability Temperature Range
LatticeECP3 150K Known Good Die Volatile -40 C to 125 C
LatticeXP2 40K Good Die Non-volatile -40 C to 125 C
ECP5 85K Known Good Die Volatile -40 C to 125 C
MachXO3 10K Known Good Die Non-volatile -40 C to 105 C

Reference Designs

莱迪思Sentry采用MachXO3D的可信根参考设计

Reference Design

莱迪思Sentry采用MachXO3D的可信根参考设计

该设计采用莱迪思Sentry IP帮助您开发和测试一套完整的符合NIST 800-193规范的PFR解决方案。您还可以对其进行修改满足特定需求。
莱迪思Sentry采用MachXO3D的可信根参考设计
Lattice Sentry Root of Trust Reference Design for Mach-NX

Reference Design

Lattice Sentry Root of Trust Reference Design for Mach-NX

This design utilizes Platform Firmware Resiliency System Root of Trust to help develop and test a complete NIST 800-193 compliant security system that protects, detects, and recovers.
Lattice Sentry Root of Trust Reference Design for Mach-NX
莱迪思Sentry 2.2 BKC参考设计

Reference Design

莱迪思Sentry 2.2 BKC参考设计

莱迪思Sentry最佳配置(Best-Known Configrations)参考设计为实现PFR设计提供了基本框架。
莱迪思Sentry 2.2 BKC参考设计
单线聚合

Reference Design

单线聚合

使用低成本FPGA以TDM的方式聚合多个数据流,例如I2C、UART、I2S和GPIO,通过单线传输并解聚合。
单线聚合
人员侦测

Reference Design

人员侦测

使用莱迪思sensAI IP持续搜索附近是否有人存在并报告结果。可作修改用于检测其他任何物体。
人员侦测

IP Cores

PCI Express for Avant FPGAs

IP Core

PCI Express for Avant FPGAs

The Lattice PCIe X8 IP Core provides a flexible, high-performance, easy-to-use Transaction Layer Interface to the PCI Express Bus.
PCI Express for Avant FPGAs
RISC-V MC CPU IP核

IP Core

RISC-V MC CPU IP核

Propel IP模块:具有可选的定时器和PIC子模块的32位RISC-V处理器核,通过AHB-Lite总线连接到其他Propel各类IP模块。
RISC-V MC CPU IP核
RISC-V RX CPU IP Core

IP Core

RISC-V RX CPU IP Core

Lattice RISC-V RX IP processes data and instructions while monitoring the external interrupts, using 32-bit RISC-V processor core and several submodules.
RISC-V RX CPU IP Core
RISC-V SM CPU IP核

IP Core

RISC-V SM CPU IP核

RISC-V SM CPU IP可以在处理数据和指令时处理外部中断。该IP支持RV32I指令集、外部中断和调试,遵循JTAG – IEEE 1149.1标准。
RISC-V SM CPU IP核
莱迪思Sentry QSPI监视器IP核用于MachXO3D

IP Core

莱迪思Sentry QSPI监视器IP核用于MachXO3D

用于莱迪思Sentry的Propel IP模块:监视SPI/QSPI总线上的通信,可识别和阻止潜在的非法通信。
莱迪思Sentry QSPI监视器IP核用于MachXO3D

Development Kits & Boards

基于Mach-NX的莱迪思Sentry演示板

Board

基于Mach-NX的莱迪思Sentry演示板

这一完善的平台能够帮助您开发和测试符合NIST 800-193规范的PFR方案,包括实现调试、接口和拓展的各种特性。
基于Mach-NX的莱迪思Sentry演示板
CrossLink-NX评估板

Board

CrossLink-NX评估板

CrossLink-NX评估板载有一片40K逻辑单元的CrossLink-NX FPGA;可轻松访问FPGA上的大多数I/O和PCIe 5G SERDES; 拥有FPGA中间层板卡(FMC)、Raspberry Pi、MIPI CSI-2、D-PHY和通用接头,大大扩展了易用性。
CrossLink-NX评估板
USB3-GbE VIP IO开发板

Board

USB3-GbE VIP IO开发板

适用于视频接口平台(VIP)的USB 3.0 和千兆以太网输出板
USB3-GbE VIP IO开发板
ECP5评估板

Board

ECP5评估板

售价仅为99美元的ECP5评估板拥有一片85K LUT的ECP5-5G FPGA;可轻松访问大多数I/O以及SERDES;更支持Arduino和Raspberry Pi以及通用接口以提高可用性。
ECP5评估板
iCE40 UltraPlus 分线板

Board

iCE40 UltraPlus 分线板

适用于iCE40 UltraPlus 5K版器件的分线板
iCE40 UltraPlus 分线板

Demos

Crosslink-NX PCIe桥接板上的PCIe基础演示

演示

Crosslink-NX PCIe桥接板上的PCIe基础演示

该PCIe基础演示可以控制三个7段LED,并通过PCIe插槽操作FPGA的片上存储器。
Crosslink-NX PCIe桥接板上的PCIe基础演示
PCIe Colorbar Demo for Lattice Nexus-based FPGAs

演示

PCIe Colorbar Demo for Lattice Nexus-based FPGAs

PCIe Colorbar Demo displays a series of moving colorbars by streaming the image data using DMA transfers from the FPGA to the host system.
PCIe Colorbar Demo for Lattice Nexus-based FPGAs
PCIe DMA Throughput Demo for Lattice Nexus-based FPGAs

演示

PCIe DMA Throughput Demo for Lattice Nexus-based FPGAs

The PCI Express DMA Throughput Demo allows to initiate DMA read and write transactions, transferring data from the host to the FPGA and vice versa.
PCIe DMA Throughput Demo for Lattice Nexus-based FPGAs
PCIe Multifunction Demo for Lattice Nexus-based FPGAs

演示

PCIe Multifunction Demo for Lattice Nexus-based FPGAs

Demonstrates the multifunction capabilities of the Crosslink-NX FPGA that allows access to GPIO, MDIO and I2C registers.
PCIe Multifunction Demo for Lattice Nexus-based FPGAs
莱迪思Sentry MachXO3D可信根演示

演示

莱迪思Sentry MachXO3D可信根演示

完整的位流/固件包可帮助您在采用MachXO3D的莱迪思Sentry演示板上演示和测试符合NIST 800-193规范的PFR解决方案
莱迪思Sentry MachXO3D可信根演示

Quality Programs

Lattice is committed to Industry Leadership in the supply of high quality programmable logic components and software design tools.

Commitment to Defense

Lattice is committed to providing the Defense market with industry’s most complete portfolio optimized for SWAP-C, longest product life cycle and dedicated local engineering support.

Documentation

资讯资源
标题 编号 版本 日期 格式 文件大小
选择全部
Defense Solutions Brief
I0271 Rev 1 8/4/2020 PDF 1.6 MB
标题 编号 版本 日期 格式 文件大小
选择全部
A Guide to the Benefits of the Lattice Nexus FPGA Platform for Mission-Critical Applications
WP0028 1.0 1/22/2021 PDF 449.4 KB

Support

技术支持

有问题?我们来帮助您

质量和可靠性

参考资料帮助解答您的问题