Lattice Solutions

Board

Avant-E Evaluation Board

The Avant-E Evaluation Board has the ability to expand the usability of the Avant-E FPGA with FMC HPC, PMOD, and Raspberry PI connectors.

Avant-E 

Lattice Avant, SPI Flash, LPDDR4, SERDES, GPIO, PMOD, FMC, Industrial Networking, SDR 

Board

CertusPro-NX PCIe Bridge Board

The CertusPro-NX PCIe Bridge Board enables video bridge capabilities to PCIe and embedded vision type applications.

CertusPro-NX 

Lattice mVision, PCIe, JTAG, SPI Flash, LPDDR4, PMOD, SERDES, X/S/RGMII, Industrial Networking, FMC 

Board

CrossLink-NX Evaluation Board

For general evaluation and development with CrossLink-NX, includes many flexible interfaces such as FMC and PMOD with generous device IO access

CrossLink-NX 

Arduino, Breakout, FMC, PMOD, Raspberry Pi, SMA, SPI Flash, CSI-2, AR / VR & Drones, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, Defense, Automotive 

Demo

Demo for Lattice ORAN Secure Sync for IEEE 1588 PTP

Demo for Lattice ORAN Secure Sync show how Lattice FPGA w/ soft IPs can support tight & secure synchronization using 1588 PTP & ITU profiles for Telecom.

CertusPro-NX 

Lattice ORAN, PCIe, SFP, SERDES, FMC, IEEE1588, 5G 

IP Core

DisplayPort IP Core

The Lattice DisplayPort IP Core is designed for transmission and reception of serial-digital video for consumer and professional displays.

CertusPro-NX 

Lattice Drive, DisplayPort, FMC, SERDES 

Reference Design

Lattice ORAN IEEE 1588 PTP Secure Sync Reference Design

Lattice ORAN 1.1 RD shows how to provide ultra-reliable time synchronization & phase alignment for delivering timing accuracy in 5G ORAN networks.

CertusPro-NX 

Lattice ORAN, PCIe, SFP, SERDES, FMC, IEEE1588 

Board

Lattice ORAN Timing and Synchronization Kit

ORAN Sync Board has 2x 10GE & 2x 1GE ports, SMA & FMC connectors for testing, demos, development, GNSS & on-board timing sources, ToD, & PPS RJ48 connectors

CertusPro-NX 

5G, Lattice ORAN, FMC, SMA, IEEE1588 

Demo

DisplayPort & Video Scaler Demonstration

Lattice DisplayPort & Video Scaler Demonstration enhance the conversion of DisplayPort signals to ensure seamless compatibility with various video formats.

CertusPro-NX 

Lattice Drive, DisplayPort, Video Scaling, FMC 

Reference Design

DisplayPort & Video Scaler Reference Design

The Lattice Drive DisplayPort & Video Scaler Reference Design implements easy evaluation of various DisplayPort interface.

CertusPro-NX 

Lattice Drive, DisplayPort, Video Scaling, FMC 

Demo

DisplayPort, Scaler & Local Dimming Demonstration

Lattice DisplayPort, Scaler & Local Dimming Demonstration implements upscaling the incoming video and controls the full LED array backlight of the Panel.

CertusPro-NX 

Lattice Drive, DisplayPort, Video Scaling, Local Dimming, LVDS, MIPI, eDP, FMC 

Board

Modular FMC Adapter

The Modular FMC Adapter is the base board connecting the Lattice FPGA development kits through the FMC connector up to two transmitter & receiver boards.

CertusPro-NX 

Lattice Drive, DisplayPort, Video Scaling, Local Dimming, LVDS, MIPI, eDP, FMC 

Board

CertusPro-NX Evaluation Board

CertusPro-NX Evaluation Board, a FPGA-based rapid prototyping and testing of specific designs with the features of CertusPro-NX FPGA family.

CertusPro-NX 

Breakout, SMA, SPI Flash, Raspberry Pi, FMC, SERDES, PMOD, Automotive, SDR 

Board

eUSB 3.1 FMC

eUSB 3.1 FMC board is to validate USB 3.1 functionality with FPGA’s inbuilt serial transceivers. It has ULPI PHY chip to validate USB 2.0 functionality.

CrossLink-NX 

FMC, Data Compression, DSP, USB Type-C, USB3, Camera, Image Processing, Video Tx/Rx 

IP Core

eUSB 3.1 Gen 1 Device Controller IP Core (eUSB31SF)

This IP core solution uses the CL-NX FPGA’s built-in transceiver for USB 3.1 and ULPI PHY for USB 2.0. It supports SuperSpeed, High Speed and Full Speed modes.

CrossLink-NX 

ARM, RISC-V, Soft Processor, FMC, AHB, AHB-Lite, AXI, USB Type-C, USB3, USB2, ULPI 

IP Core

USB 2.0 Device Controller IP Core (USB20SF)

USB20SF IP core provides FIFO interface for Data Endpoints while AHB Lite interface for Control Endpoint. This IP core supports High Speed and Full Speed modes

CrossLink-NX 

ARM, RISC-V, Soft Processor, FMC, AHB, AHB-Lite, AXI, Camera, ULPI, USB2 

IP Core

USB 2.0 Device with FIFO Interface (USB20HF)

USB20HF IP Core provides FIFO & ULPI interface. It supports High Speed and Full Speed functionality for 15 IN/OUT endpoints.

CrossLink-NX, iCE40 UltraPlus, MachXO2 

FMC, Data Communication, Camera, ULPI, USB2, FIFO 

Board

KONDOR AX Development Board

ECP5 board for system design of HetNet, Industrial IoT, Cameras and Display applications

ECP5 / ECP5-5G 

ARM, CPRI, CSI-2, Data Communication, DDR SDRAM, Fiberoptic, FMC, HDMI, LVDS Video, MIPI, PCIe, SD Memory, SERDES, Soft Processor