Lattice Solutions

IP Core

FFT Compiler IP Core

The FFT Compiler IP Core can be configured to perform forward FFT, inverse FFT (IFFT), or port selectable forward/inverse FFT.

ECP5 / ECP5-5G, LatticeECP3, LatticeECP2/M, Certus-NX, CertusPro-NX, MachXO5-NX, CrossLink-NX, Avant-E, Avant-G, Avant-X, Certus-N2 

Data Communication, DSP, Guidance Systems, Automotive, DSP Bundle, SDR 

IP Core

FIR Filter Generator IP Core

This IP core is a widely configurable, multi-channel FIR filter, implemented using high performance sysDSP™ blocks available in Lattice devices.

ECP5 / ECP5-5G, LatticeECP3, LatticeXP2, CrossLink-NX, Certus-NX, CertusPro-NX, MachXO5-NX, Avant-E, Avant-G, Avant-X, Certus-N2 

DSP, Guidance Systems, Automotive, DSP Bundle, SDR 

IP Core

​​JESD204B IP Core​

​​The Lattice JESD204B IP Core is a high-speed serial interface used between data converters, and the FPGA device to replace traditional interfaces.​

ECP5 / ECP5-5G, LatticeECP3, CertusPro-NX, Avant-G, Avant-X 

ADC/DAC, DSP, SDR 

IP Core

10Gb Ethernet MAC+PHY IP Core

The Lattice 10G Ethernet (GbE) IP core supports the ability to transmit and receive data between a host processor and an Ethernet network.

Avant-G, Avant-X, CertusPro-NX 

Ethernet, PCS, XGMII, AXI4, Ethernet Bundle, SDR 

IP Core

25Gb Ethernet MAC+PHY IP Core

The Lattice Semiconductor 25G Ethernet (GbE) IP core supports the ability to transmit and receive data between a host processor and an Ethernet network.

Avant-X 

Ethernet, Lattice Avant, IEEE 802.3, Ethernet Bundle, SDR 

IP Core

PCI Express x1, x4 Root Complex Lite IP Core

Provides a PCI Express x1 and x4 root complex solution from the electrical SERDES interface, physical layer, data link layer and a minimum transaction layer in PCIe protocol stack

ECP5 / ECP5-5G, LatticeECP3, LatticeECP2/M 

PCIe, Guidance Systems, Automotive, PCIe Bundle, SDR 

Board

Avant-E Evaluation Board

The Avant-E Evaluation Board has the ability to expand the usability of the Avant-E FPGA with FMC HPC, PMOD, and Raspberry PI connectors.

Avant-E 

Lattice Avant, SPI Flash, LPDDR4, SERDES, GPIO, PMOD, FMC, Industrial Networking, SDR, Defense, Lattice Automate 

Board

Avant-G Versa Board

The Avant-G Versa Board features on-board LPDDR4, PCIe Gen3, and majority of I/O bonded out to FMC, PMOD, SMA and other connectors available.

Avant-G 

Lattice Avant, SPI Flash, LPDDR4, SERDES, GPIO, PMOD, FMC, Industrial Networking 

Board

Avant-X Versa Board

Avant-X Versa Board support devices that offers a modernized feature set for accelerated system design and fastest soft error detect (SED).

Avant-X 

Lattice Avant, SPI Flash, DDR5, LPDDR4, SERDES, GPIO, PMOD, FMC, Industrial Networking, SDR, Defense 

IP Core

Image Signal Processing IP Cores Suite

The Lattice mVision ISP IP Core implements ISP pipelines for image quality enhancements in embedded designs based on Lattice FPGA devices.

CrossLink-NX, Certus-NX, CertusPro-NX, Avant-E 

AXI, AXI-Stream, AXI-Lite Interface, AWB, Camera, CCM, CFA Interpolation, Debayer, Image Processing, Image Signal Processing, Lattice mVision, RGB, Defense 

Board

CertusPro-NX Versa Board

CertusPro-NX Versa Board supports a wide range industry standards such as MIPI, SFP+, 10 GbE, LPDDR4 and PCIe (Gen3) for rapid prototyping and testing.

CertusPro-NX 

Lattice mVision, MIPI, LPDDR4, PCIe, Video Tx/Rx, IoT & Wearables, Smart Toys & Robots, Home Control Appliances & Security, Notebooks & PCs, Tablets, Printers, AR / VR & Drones, SFP, Lattice ORAN, Lattice Automate, GPIO Control, I2C, PMOD, SERDES, SMA, SPI, UART, Automotive, Industrial Networking 

Reference Design

​​I/O Aggregation Over USB with CrossLinkU-NX Reference Design​

USB to IO Bridging Reference Design Create plug-and-play peripheral expansion on USB-enabled FPGA & signal protocol conversion from USB to I2C, SPI, & GPIO.

CrossLink-NX 

USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 

Board

Certus-N2 Evaluation Board

Certus-N2 Evaluation Board is designed for evaluating and developing with the Certus-N2 family and supports 16G Serdes, LPDDR4, PCI-Gen4.

Certus-N2 

LPDDR4, PCIe, SPI, UART, I2C 

Board

CertusPro-NX Sensor to Ethernet Bridge Board

The board is fully integrated into NVIDIA IGX/AGX™ system software offering open-source enablement IP and easy programmable system control.

CertusPro-NX 

Ethernet, GPIO Control, SPI, I2C 

Board

CrossLinkU-NX Evaluation Board

CrossLinkU-NX Evaluation Board is a platform for general purpose application development using CrossLinkU-NX device, the first FPGA with hard USB2/3 (5Gbps) interface.

CrossLink-NX 

USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 

Reference Design

GHRD/GSRD Reference Design

The Golden Hardware and Software Reference Design comprises of components for developing various kind of applications using CertusPro-NX Versa Board.

CertusPro-NX, Avant-E 

GHRD, GSRD, RISC-V, AXI4, MPMC, Lattice Automate, Defense 

IP Core

MACsec AES256-GCM, High-speed (XIP1213H)

The high-speed MACsec IP core implements the MACsec protocol as standardized in IEEE 802.1AE-2018, defining a security infrastructure for OSI model Layer 2 traffic.

Avant-E, Avant-G, Avant-X 

AES, Encryption, NIST, Security, ECC, Public/Private Key, SHA, SDR 

IP Core

QSPI Flash Controller IP Core

The QSPI Flash Controller IP allows communication with multiple external SPI flash devices using standard, extended dual/quad, dual, or quad SPI protocols.

Avant-E, Avant-G, Avant-X, CertusPro-NX, Certus-NX, Certus-N2 

QSPI, SPI Flash, SPI, Flash 

Reference Design

Secure Connected Motion Control Platform

​​This platform offers resilient connectivity, low power consumption, high performance, and robust security is increasing across various industries.​

CertusPro-NX, MachXO3D 

LPDDR4, PCIe, RoT, PMOD, FMC, FTDI, ADC/DAC 

IP Core

USB 2.0/3.2 IP Core

Lattice USB 2.0/3.2 IP Core provides a solution to interface with a USB host and can be targeted to the Lattice CrossLink-NX FPGA Devices.

CrossLink-NX 

USB, USB2, USB3, AHB, AHB-L, AHB-Lite, AXI, I2C, SPI, JTAG, LVDS, SLVS, FTDI