• Home >
  • Lattice Solutions

Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type
Device Support
Tags
Providers
Clear All
  • ​​I/O Aggregation Over USB with CrossLinkU-NX Reference Design​

    Reference Design

    ​​I/O Aggregation Over USB with CrossLinkU-NX Reference Design​

    USB to IO Bridging Reference Design Create plug-and-play peripheral expansion on USB-enabled FPGA & signal protocol conversion from USB to I2C, SPI, & GPIO.
    CrossLink-NX 
    USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 
    ​​I/O Aggregation Over USB with CrossLinkU-NX Reference Design​
  • CrossLinkU-NX Evaluation Board

    Board

    CrossLinkU-NX Evaluation Board

    CrossLinkU-NX Evaluation Board is a platform for general purpose application development using CrossLinkU-NX device, the first FPGA with hard USB2/3 (5Gbps) interface.
    CrossLink-NX 
    USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 
    CrossLinkU-NX Evaluation Board
  • Secure Connected Motion Control Platform

    Reference Design

    Secure Connected Motion Control Platform

    ​​This platform offers resilient connectivity, low power consumption, high performance, and robust security is increasing across various industries.​
    CertusPro-NX, MachXO3D 
    LPDDR4, PCIe, RoT, PMOD, FMC, FTDI, ADC/DAC 
    Secure Connected Motion Control Platform
  • USB 2.0/3.2 IP Core

    IP Core

    USB 2.0/3.2 IP Core

    Lattice USB 2.0/3.2 IP Core provides a solution to interface with a USB host and can be targeted to the Lattice CrossLink-NX FPGA Devices.
    CrossLink-NX 
    USB, USB2, USB3, AHB, AHB-L, AHB-Lite, AXI, I2C, SPI, JTAG, LVDS, SLVS, FTDI 
    USB 2.0/3.2 IP Core
  • USB to I/O Aggregation and Bridging Demonstration

    Demo

    USB to I/O Aggregation and Bridging Demonstration

    The USB to I/O Aggregation and Bridging Demo shows the capabilities of the Lattice FPGA and accelerating USB 2.0/3.2 (5Gbps) Interface Innovation.
    CrossLink-NX 
    USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 
    USB to I/O Aggregation and Bridging Demonstration
  • LimeSDR Mini Development Board by Lime Microsystems

    Board

    LimeSDR Mini Development Board by Lime Microsystems

    LimeSDR Mini Dev Board is a low cost, open source and apps-enabled SDR platform that can be used to support any type of wireless communication standard.
    ECP5 / ECP5-5G 
    Community Sourced, RF Transceiver, FTDI, GPIO, JTAG, Defense, SDR 
    LimeSDR Mini Development Board by Lime Microsystems
  • CRUVI Certus-NX Base Board

    Board

    CRUVI Certus-NX Base Board

    Evaluation and development with Certus-NX FPGA, included are CRUVI HS/LS interface and 100mil pin headers for user IO, on-board USB JTAG/UART.
    Certus-NX 
    HyperRAM, SPI, EEPROM, CRUVI, QSPI Flash Memory, micro USB, FTDI 
    CRUVI Certus-NX Base Board
    • Page 1 of 1
    First Previous
    1
    		Next Last

    ABOUT LATTICE

    SALES

    SUPPORT

    FOLLOW