Lattice Avant G70 PCIe Mini-Board

PCIe Card with High-Performance Interfaces Using Lattice Avant-G

Related Products


Newsletter Subscription

The Lattice Avant-G70 PCIe Board, powered by the Avant G FPGA, is designed for applications such as AI, image and video processing, and industrial communication. It provides extensive connectivity options, including PCIe, SFP+, FMC, MIPI, and more, alongside onboard memory and clock/power circuitry to support high-computation tasks and interface evaluation.

Features

  • PCIe Support: Compatible with x1/x2/x4 PCIe Gen 3 and Gen 4.
  • Networking Interfaces: SFP+ connector for 10G Ethernet/RJ45 connector for 1G Ethernet.
  • Connectivity:
    FMC connector with LA banks and Gigabit transceiver lanes.
    MIPI IAS (MIPI CSI-4) connector.
    Cruvi LS type connector with extension cable.
  • External Interfaces:
    • SMA connector for SerDes
    • USB 2.0 for UART/I2C access and JTAG port
    • JTAG header and two PMOD headers (2x6)
    • Onboard Memory:2GB LPDDR4 memory/SPI Flash (512Mb, supports x1/x4/x8 modes)/Micro SD card connector
    • General-purpose LEDs and push button
    • 12V DC power supply with protection for abnormal conditions
    • Commercial and industrial-grade availability

Jump to

Block Diagram

Avant-G70 PCIe Eval Board Block DiagramExpand Image

Avant-G70 PCIe Eval Board

  • High-level block diagram

Board Photo

Avant G70 PCIe Mini-Board Top ViewExpand Image

Top View

Avant G70 PCIe Mini-Board Bottom ViewExpand Image

Bottom View

Kit Contents

  • Lattice Avant G PCIe Mini-Board - 1 No
  • 12V DC Power supply Adapter- 1 No
  • USB 2.0 Mini Cable -1 No
  • PCB IO Bracket -1 No (Optional)
  • User Manual Document
  • Heat Sink and Fan – Each 1 No (Optional)

Table

Sno Name of Interface Connector type /On board Description SERDES Remarks
1 LPDDR4 On Board 2GB LPDDR4 Provide for memory supports to FPGA No
2 CONFIG On Board INITN & DONE: Red LED, Green LED
INITN/Programn: Pushbutton		 No
3 OSPI Flash On Board 1x SPI Flash with 512Mb, supports x1/x4/x8 SPI Modes No
4 LED x4 On Board 4x LEDs mapped for general purpose No

Sno Name of Interface Connector type /On board Description SERDES Remarks
1 UART & JTAG USB 2.0 Connector 1x USB 2.0 Mini connector for UART and JTAG mapped to FPGA. No
1X8 Header 1x JTAG header mapped to FPGA. No
2 MIPI IAS or CSI 30 POS RCPT Connector 1x MIPI CSI Interface mapped to FPGA. No
3 1G Ethernet RJ45 Connector 1x RJ45 connector mapped to FPGA. No
4 PMOD  2X6 Header 2x PMOD interface header which supports I2C, UART, SPI & GPIO No
5 Micro SD Card Micro SD card 1x uSD card connector mapped for external memory provision to FPGA No
6 Cruvi LS  2X6 Header 1x 12 Pin header mapped for Cruvi interface which supports I2C, SPI No
7 Switches Dip switch 1x Dip Switch with 4 position mapped for general purpose No
8 FPGA Reset Push button 1x Pushbutton mapped for FPGA Reset No
9 FMC FMC HPC Connector 1x FMC connector mapped to FPGA Yes HA and HB bank pins in FMC made No connect
10 PCIe Gen 3/4 PCIe x4 Gold finger  1x PCIe x4 gold finger connector mapped to one of the SERDES Quad Yes
11 10G Ethernet SFP+ Connector with Cage 1x SFP+ connector mapped to one of the SERDES Quad Yes
12 RF Connector SMA or SMB Connectors 6x SMA Connector mapped to one of the Serdes Quad lane and clock Yes

Ordering Information

For more technical or ordering information about this Partner Board, please visit the below page or contact info@logic-fruit.com:

https://www.logic-fruit.com/products/lattice-avant-g70-pcie-mini-board/

Support

Technical Support

Need Help? We're Here to Assist You

Licensing

Find The Software & IP Licenses You Need

Quality & Reliability

Reference Material to Help Answer Your Questions

Services

Outside Services to Help Get The Job Done

ABOUT LATTICE

SALES

SUPPORT

FOLLOW