Lattice Solutions

IP Core

Timer/Counter IP Core

The Lattice Semiconductor Timer/Counter IP is used to track timeouts in the system, and it generates an interrupt to the CPU when a timeout is detected.

Certus-NX, CrossLink-NX, Avant-E, Avant-G, Avant-X, CertusPro-NX, CrossLink, CrossLinkPlus, ECP5 / ECP5-5G, iCE40 LP/HX, iCE40 Ultra / UltraLite, iCE40 UltraPlus, LatticeECP2/M, LatticeECP3, LatticeSC/M, LatticeXP2, Mach-NX, MachXO, MachXO2, MachXO3, MachXO3D, MachXO5-NX 

AMBA, Lattice Propel, Lattice Diamond, Lattice Radiant, APB, AHB-Lite, Lattice Sentry, Lattice Sentry PFR IP Package, Security 

IP Core

Lattice Sentry ESB Mux IP Core for MachXO3D

Propel IP Module for Lattice Sentry: Enables access the MachXO3D embedded security block (ESB) simultaneously with internal crytographic operations

MachXO3D 

AMBA, APB, Security, Lattice Sentry PFR IP Package, Lattice Sentry, Lattice Propel 

IP Core

Lattice Sentry I2C Filter IP Core

Sentry I2C Filter IP Core provides an interface between I2C bus devices and a host processor while protecting against common I2C bus vulnerabilities.

Mach-NX, MachXO3D, MachXO5-NX 

I2C, AHB-Lite, AHB-L, Lattice Propel, Lattice Sentry, Security, AMBA, FPGA, SMBus, RoT, Lattice Diamond, Lattice Sentry PFR IP Package, Defense 

IP Core

Lattice Sentry I2C Monitor IP Core for MachXO3D

Propel IP Module for Lattice Sentry: Monitors traffic on I2C bus to identify and block potentially illegal traffic.

MachXO3D 

APB, AMBA, Lattice Sentry PFR IP Package, Security, I2C, Lattice Propel, Lattice Sentry 

IP Core

Lattice Sentry QSPI Streamer IP Core for MachXO3D

Propel IP Module for Lattice Sentry: Provides fast SPI memory access for firmware authentication as part fo Platform Root of Trust operation

MachXO3D 

AMBA, Lattice Propel, APB, Lattice Sentry PFR IP Package, SPI, Lattice Sentry, Security 

IP Core

AXI4 Interconnect Module

AXI4 Interconnect is a flexible, versatile, and easy-to-use IP with high-performance and low-latency interconnect fabric for AMBA 4 AXI/AXI-lite based systems.

Avant-E, Avant-G, Avant-X, CrossLink-NX, MachXO5-NX, Certus-NX, CertusPro-NX 

AMBA, AXI4, AXI, AXI-Lite Interface, Lattice Avant 

Reference Design

APB to AHB-Lite Bridge Reference Design

The APB to AHB-Lite Bridge Reference Design provides an interface between the low power APB and the high-speed AHB-Lite.

MachXO3D, MachXO3, MachXO2 

APB, AHB, AMBA 

IP Core

DC-SCM LVDS Tunneling Protocol and Interface IP Core

LTPI IP Core is an Open Computer Project Data Center – Secure Control Module Standards compatible solution which is introduced in the DC-SCM 2.0 Specification.

MachXO3, MachXO3D, MachXO5-NX, Mach-NX 

CRC, LVDS, LTPI, AMBA, APB, Lattice Diamond, Lattice Radiant 

Reference Design

LVDS Tunneling Protocol and Interface Reference Design

The DC-SCM 2.0 LTPI Reference Design provides multiple solution compliant with DC-SCM 2.0 with a standardized DC-SCI and aggregating multiple data channels.

MachXO5-NX, MachXO3D, MachXO3, Mach-NX 

CRC, LVDS, I2C, GPIO, UART, LTPI, AMBA, APB, Lattice Diamond, Lattice Propel 

Reference Design

I2C to APB Bridge Reference Design

With support APB read / write capability, the I2C to APB Bridge Reference Design converts external I2C Master into APB Master transaction.

MachXO2, MachXO3, MachXO3D 

I2C, APB, AMBA, AHB 

IP Core

RISC-V Single Core Linux (SCL) Processor

RISC-V Single Core Linux processor includes everything required for running Linux on Lattice FPGAs and supports the RV32IMAC and RV32GC architecture.

CertusPro-NX 

RISC-V, Soft Processor, DDR Memories, AHB, AHB-Lite, AMBA, AXI, GPIO Control, UART 

IP Core

SLVS-EC Receiver IP Core

The SLVS-EC RX IP provides the FPGA an interface to receive serial data from CMOS Image Sensors and offers a solution to convert the incoming serial data to a parallel pixel data format.

CertusPro-NX 

SLVS-EC, APB, AHB, AMBA, PMA, PCS, MPCS 

IP Core

AHB-Lite Interconnect Module

Propel IP Module: Fully parameterized interconnect for AHB-Lite systems - bus widths of 8 to 1024 bits, address widths up to 32 bits, 32 masters and 32 slaves.

MachXO3D, Certus-NX, CrossLink-NX, Mach-NX 

AMBA, Lattice Propel, AHB-Lite, TOR Switch, Automotive 

IP Core

AHB-Lite to APB Bridge Module

Propel IP Module: Bridges high-speed AHB-lite to low-power APB. Data bus widths up to 32 bits. Address width up to 32 bits.

MachXO3D, Certus-NX, CrossLink-NX, Mach-NX 

AMBA, APB, Lattice Propel, AHB-Lite, TOR Switch, Automotive 

IP Core

APB Interconnect Module

Propel IP Module: Fully parameterized to connect up to 32 APB bus masters and 32 slaves. Data bus width up to 32 bits. Address width up to 32 bits.

MachXO3D, Certus-NX, CrossLink-NX, Mach-NX 

AMBA, APB, Lattice Propel, Automotive 

IP Core

EFB Module

Propel IP Module: Implements the Embedded Function Block (EFB) in MachXO3D, including I2C, Configuration Blocks and User Flash Memory with an APB Interface.

MachXO3D 

AMBA, Embedded FPGA Flash, I2C, APB, Lattice Propel, TOR Switch 

IP Core

System Memory Module IP Core

Propel IP Module: Configures Embedded Block RAMs or Distributed Memory interfaces and connects to the AHB-Lite bus.

Avant-E, CertusPro-NX, Certus-NX, CrossLink-NX, Mach-NX, MachXO3D, MachXO3, MachXO2 

Embedded Ram, AHB-Lite, AMBA, Lattice Propel, TOR Switch, Automotive 

IP Core

UART IP Core

Propel IP Module: Similar to NS16450 UART for serial communication supporting RS-232.

MachXO3D, Certus-NX, CrossLink-NX, Mach-NX, MachXO2, MachXO3 

APB, RS-232, AMBA, Lattice Propel, UART, TOR Switch, Defense, Automotive 

IP Core

CANmodule-III

Compliant to the international CAN standard defined in ISO 11898-1, interfaces to an AMBA 2 Advanced Peripheral Bus (APB)

iCE40 LP/HX 

AMBA, Bus Controllers, CAN 

IP Core

CANmodule-IIx

Fully functional CAN controller module that contains advanced message filtering, and receive and transmit buffers.

iCE40 LP/HX 

AMBA, Bus Controllers, CAN