• Home >
  • Lattice Solutions

Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type
Device Support
Tags
Providers
Clear All
  • CertusPro-NX Versa Board

    Board

    CertusPro-NX Versa Board

    CertusPro-NX Versa Board supports a wide range industry standards such as MIPI, SFP+, 10 GbE, LPDDR4 and PCIe (Gen3) for rapid prototyping and testing.
    CertusPro-NX 
    Lattice mVision, MIPI, LPDDR4, PCIe, Video Tx/Rx, IoT & Wearables, Smart Toys & Robots, Home Control Appliances & Security, Notebooks & PCs, Tablets, Printers, AR / VR & Drones, SFP, Lattice ORAN, Lattice Automate, GPIO Control, I2C, PMOD, SERDES, SMA, SPI, UART, Automotive, Industrial Networking 
    CertusPro-NX Versa Board
  • Lattice Sentry Root of Trust Reference Design for Mach-NX

    Reference Design

    Lattice Sentry Root of Trust Reference Design for Mach-NX

    This design utilizes Platform Firmware Resiliency System Root of Trust to help develop and test a complete NIST 800-193 compliant security system that protects, detects, and recovers.
    Mach-NX 
    GPIO Control, I2C, RISC-V, SPI, UART, NIST, Lattice Propel, Lattice Sentry, Defense 
    Lattice Sentry Root of Trust Reference Design for Mach-NX
  • RISC-V Single Core Linux (SCL) Processor

    IP Core

    RISC-V Single Core Linux (SCL) Processor

    RISC-V Single Core Linux processor includes everything required for running Linux on Lattice FPGAs and supports the RV32IMAC and RV32GC architecture.
    CertusPro-NX 
    RISC-V, Soft Processor, DDR Memories, AHB, AHB-Lite, AMBA, AXI, GPIO Control, UART 
    RISC-V Single Core Linux (SCL) Processor
  • CrossLink-NX PCIe Bridge Board

    Board

    CrossLink-NX PCIe Bridge Board

    Connectivity Development Platform Enabling Bridging of Multi-Standard I/O Interfaces to PCIe
    CrossLink-NX 
    PCIe, DDR SDRAM, Camera, Ethernet, UART, SPI Flash, ADC/DAC, MIPI, GPIO Control, I2C 
    CrossLink-NX PCIe Bridge Board
  • GPIO IP Core

    IP Core

    GPIO IP Core

    Detects and controls GPIOs via Lattice Memory Mapped Interface (LMMI) or Advanced Peripheral Bus Interface (APB).
    CertusPro-NX, Certus-NX, CrossLink-NX, Mach-NX, iCE40 UltraPlus, MachXO5-NX, Avant-E 
    GPIO Control, APB, Bus Controllers, TOR Switch, Automotive 
    GPIO IP Core
  • LatticeMico32 Open, Free 32-Bit Soft Processor

    IP Core

    LatticeMico32 Open, Free 32-Bit Soft Processor

    A 32-bit Harvard, RISC architecture soft microprocessor, available for free with an open IP core license. Many compatible modules and IP are available.
    LatticeECP3, LatticeXP2, LatticeECP2/M 
    GPIO Control, Mico, Soft Processor, UART, Wishbone, TOR Switch, Defense 
    LatticeMico32 Open, Free 32-Bit Soft Processor
  • Arctic Tern BMC Kit

    Board

    Arctic Tern BMC Kit

    Arctic Tern PCIe carrier is a ModBMC-compatible low profile card, designed to provide a powerful peripheral development platform and full BMC hardware solution.
    ECP5 / ECP5-5G 
    RS-232, Ethernet, SERDES, NOR Flash, SPI Flash, GPIO Control, I2C, PCIe, HDMI, Community Sourced 
    Arctic Tern BMC Kit
  • SPI GPIO Expander

    Reference Design

    SPI GPIO Expander

    Expand microprocessor general purpose I/O ports with a Serial Peripheral Interface (SPI)
    Platform Manager, MachXO, ispMACH 4000ZE 
    GPIO Control, Signal Aggregation, Soft Processor, SPI, TOR Switch 
    SPI GPIO Expander
  • GPIO Expander

    Reference Design

    GPIO Expander

    Provides a solution that uses a Lattice PLD as a GPIO Expander
    LatticeECP3, MachXO, LatticeXP2, ispMACH 4000ZE, Platform Manager 
    GPIO Control, Signal Aggregation, TOR Switch 
    GPIO Expander
  • ICE-V-Wireless-FPGA-Board

    Board

    ICE-V-Wireless-FPGA-Board

    The ICE-V Wireless FPGA board utilizes iCE40 UltraPlus with wireless support through an ESP32-C3-MINI-1 module with WiFi 4 and Bluetooth LE connectivity.
    iCE40 UltraPlus 
    PMOD, ADC/DAC, Bluetooth-BLE, GPIO Control, I2C, SPI, USB Type-C, WiFi, PSRAM, LiPo, ESP32 firmware 
    ICE-V-Wireless-FPGA-Board
  • SlnGrab

    Board

    SlnGrab

    SInGrab is a development board perfect for prototyping/testing and also for evaluating ECP5 connectivity features (PCI Express, Gigabit Ethernet, DDR3, SERDES).
    ECP5 / ECP5-5G 
    Breakout, Ethernet, SERDES, PWM, DDR SDRAM, GPIO Control, PCIe, Image Processing, Video Tx/Rx, FPD-Link II 
    SlnGrab
    • Page 1 of 1
    First Previous
    1
    		Next Last

    About Us

    Sales

    Support

     
     
     
     
     
    Lattice QR code