Lattice Solutions

Board

CrossLink-NX VIP Sensor Input Board

Intended for use with the Lattice Embedded Vision Development Kit. Includes 4 camera inputs and HyperRam for embedded video applications with CrossLink-NX

CrossLink-NX 

VIP, Camera, CSI Camera, CSI-2, HyperRAM, Image Processing, Machine Learning/AI, Lattice sensAI, Parallel Video, PMOD, SPI Flash, Video Aggregation, Video Bridge, Video Tx/Rx, Lattice mVision, AR / VR & Drones, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, Defense, Automotive 

Reference Design

MIPI DSI/CSI-2 to Parallel Bridge Reference Design

MIPI to Parallel allows quick interface between a processor and a display using RGB; or between a camera and a processor with a Parallel interface.

CrossLink-NX, CertusPro-NX, CrossLink 

Video Bridge, Modular MIPI/D-PHY, Parallel Video, Video Tx/Rx, CSI-2, DSI, Lattice mVision, Automotive 

Reference Design

Parallel to MIPI CSI-2 / DSI Display Interface Bridge Reference Design

Lattice Parallel to MIPI CSI-2/DSI Display Interface Bridge Reference Design supports low-power (LP) mode during vertical and horizontal blanking.

CrossLink-NX, CertusPro-NX, CrossLink 

Video Bridge, Modular MIPI/D-PHY, Parallel Video, Video Tx/Rx, CSI-2, DSI, Lattice mVision, Automotive 

Board

MAS LIFCL Evaluation Board

This modular, flexible and easy-to-use CrossLink-NX 17 board is designed for video applications, including CSI2 MIPI, LVDS HDMI (through PMOD).

CrossLink-NX 

PMOD, LED Control, SPI Flash, I2C, SPI, UART, CSI-2, DisplayPort, DSI, HDMI, Image Processing, LVDS Video, MIPI, Video Bridge, Video Tx/Rx 

Reference Design

Image Sensor Bridge

Interfaces a CMOS camera to a Digital Video Port (DVP) for a low-power low-footprint solution.

iCE40 UltraPlus 

DVP, Parallel Video, Video Bridge, Video Tx/Rx, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, Defense 

Board

ProFRAME CamAD3 Camera Adapters

ProFRAME camera adapters are mounted on the base board of the proFRAME video grabber and playback system. Supports GMSL 1/2/3 and FPD-Link III/IV interfaces.

MachXO3 

Infrared LED, LED Control, GPIO Control, I2C, SPI, UART, Wishbone, CSI-2, Image Processing, MIPI, Video Bridge 

IP Core

2D Scaler IP Core

Highly-configurable design to convert input video frames of one size to output video frames of a different size

ECP5 / ECP5-5G, LatticeECP3, LatticeECP2/M, LatticeXP2, Certus-NX, CertusPro-NX, MachXO5-NX 

Image Processing, Video Bridge, DSP, Lattice mVision, Defense, UAVs, Automotive, DSP Bundle 

IP Core

Tri-Rate Serial Digital Interface Physical Layer

A complete SDI PHY SERDES-based interface bridging high-speed SDI serial data to formatted parallel video data. Compliant to numerous SMPTE standards.

LatticeECP3 

Data Compression, Parallel Video, SDI Video, SMPTE/Broadcast Video, Video Bridge, Video Tx/Rx 

Reference Design

Sensor Extender

Transmits 720p60 or 1080p30 video over 8 meters of CAT5e/6 cable using two MachXO2 FPGAs, one next to the image sensor and the other just before the ISP.

LatticeECP3, MachXO2, LatticeXP2 

LVDS Video, Video Bridge, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, Automotive 

Reference Design

Sony Sub-LVDS to MIPI CSI-2 Sensor Bridge

Bridges serial Sub-LVDS interface to MIPI CSI-2

MachXO3, MachXO2 

CSI-2, LVDS Video, MIPI, Video Bridge, Video Tx/Rx 

Reference Design

Aptina HiSPi to Parallel Sensor Bridge

Bridge from HiSPi to a parallel format.

MachXO2, LatticeECP3 

HiSpi, Parallel Video, Video Bridge, Automotive 

Reference Design

Dual HiSPi Sensor Interface Bridge

Merges two video streams into a single one. Supports multiple sensor types - HiSpi, sub-LVDS or Parallel

MachXO2, LatticeXP2 

HiSpi, LVDS Video, Parallel Video, Video Aggregation, Video Bridge, Automotive 

Reference Design

Panasonic Area Sensor-to-Parallel Bridge

Converts sub-LVDS video data to a parallel format. Targeted to Panasonic MN34041 or MN34081, but adaptable to other sensors.

MachXO2, LatticeECP3, LatticeXP2 

LVDS Video, Parallel Video, Video Bridge 

Reference Design

7:1 LVDS Video Interface for MachXO2/3 and ECP5

Implements standard 7:1 LVDS interfaces using the FPGA I/O structure

MachXO2, MachXO3, ECP5 / ECP5-5G 

LVDS Video, Parallel Video, Video Bridge, Video Tx/Rx 

Reference Design

Sony subLVDS to Parallel Bridge

Provides a bridge from subLVDS sensors to parallel data for futher processing.

LatticeECP3, MachXO2, LatticeXP2, ECP5 / ECP5-5G 

LVDS Video, Parallel Video, Video Bridge, Video Tx/Rx, Automotive 

IP Core

Display Interface Multiplexer

Select asynchronous LVDS video streams (OpenLDI or FPD-link or DFP) for output by first converting them to parallel, multiplexing and reconverting to serial.

MachXO2 

LVDS Video, Parallel Video, Video Aggregation, Video Bridge, Video Tx/Rx 

Board

CSI2-to-Parallel Bridge Board

No longer available - for reference only. For development with Sony IMX169 Image Sensor and the Lattice HDR-60 system + Requires HDR-60 Video Camera Base Board...

MachXO2 

CSI-2, Parallel Video, Video Bridge