Factory Automation

当今各种工业PLC/HMI要求能够满足不同需求的平台，实现最大的设计效率，并在广泛的产品范围和较长的生命周期内重复使用。

最优的集成性、功耗和可扩展性
确定的性能和低延迟
灵活的网络、显示和传感器I/F
将软件灵活性与硬件加速相结合

莱迪思FPGA非常适合PLC/HMI设计：

比同类FPGA低75%的功耗
小尺寸– 小至4mm x 4mm
优化的2.5Gbps硬核MIPI D-Phy/通道，SLV EC和LVDS的1.5 Gbps I/O
与bulk CMOS工艺相比，软错误率降低100倍
Lattice Propel软件系统设计工具
适用于HMI及其他的众多合作伙伴解决方案

跳转到

框图
应用案例
演示
IP核
开发套件和开发板
Support

框图

应用案例

放大图片

PLC / HMI

灵活的传感器接口
软CPU和硬件加速
工业以太网和现场总线协议
系统设计工具 – Lattice Propel

演示

IP核

IP Core
 Image Signal Processing IP Cores Suite The Lattice mVision ISP IP Core implements ISP pipelines for image quality enhancements in embedded designs based on Lattice FPGA devices.
CrossLink-NX, Certus-NX, CertusPro-NX, Avant-E, Avant-G, Avant-X, Certus-N2 
AXI, AXI-Stream, AXI-Lite Interface, AWB, Camera, CCM, CFA Interpolation, Debayer, Image Processing, Image Signal Processing, Lattice mVision, RGB, Defense, Avionics 
IP Core
 Helion IONOS图像信号处理IP系列 来自Helion Vision的全面、高质量、可自行配置的ISP解决方案，包括了从基本到高级的高动态范围成像（HDRI）色彩流水线。
MachXO, LatticeXP2, LatticeECP3, CrossLink, ECP5, CrossLink-NX 
HDR, Image Processing, Video Tx/Rx, Lattice mVision, Automotive, Avionics 
IP Core
 ​​USB 3.2 Gen 1 Device Controller IP Core (USB32SF)​ This IP core solution uses the FPGA’s built-in transceiver for USB 3.2 and ULPI PHY for USB 2.0. It supports SuperSpeed, High Speed and Full Speed modes.  
CrossLink-NX, CertusPro-NX 
ARM, RISC-V, Soft Processor, FMC, AHB, AHB-Lite, AXI, USB Type-C, USB3, Camera, Image Processing, MIPI 
IP Core
 色彩空间转换器 免费IP核——支持颜色空间转换和相关的CODEC功能（数据宽度为8-16位、精度高达18位）。支持RGB、YCbCr、CMYK及更多格式之间的转换。
ECP5, LatticeECP3, LatticeECP2/M, LatticeSCM, LatticeXP2, CrossLink-NX, Certus-NX, CertusPro-NX, Avant-E, MachXO5-NX, Avant-G, Avant-X, Certus-N2 
Image Processing, JPEG CODEC, Lattice mVision, UAVs, Automotive 
IP Core
 DPC CCM – Color correction DPC CCM is designed to reduce the difference between the spectral characteristics of an image sensor and the spectral response of the human eye.
ECP5, CrossLink 
RISC-V, AXI, Image Processing, Video Tx/Rx, Embedded Ram 

开发套件和开发板

Board
 嵌入式视觉开发套件 适用于网络边缘嵌入式视觉处理应用的模块化平台
CrossLink, ECP5 
3D Video, Camera, DDR SDRAM, HDMI, Image Processing, Machine Learning/AI, Signal Aggregation, Video Tx/Rx, VIP, Lattice mVision, IoT & Wearables, Smart Toys & Robots, Home Control Appliances & Security, Notebooks & PCs, Tablets, Printers, AR / VR & Drones, UAVs 
Board
 Tachysséma Développement 101 Module A versatile compact low-power stand-alone module with LPDDR4 & 10G SERDES. Excellent compact solution (27x47m) for embedded imaging and vision applications.
CertusPro-NX 
RISC-V, Ethernet, SERDES, DDR Memories, SPI Flash, Image Processing, MIPI 
Board
 Tachysséma Développement 201 Board A powerful development board that makes development, testing and validation of FPGA CertusPro-NX projects easier and supports 10 GbE SerDes and LPDDR4 memory.
CertusPro-NX 
RISC-V, PMOD, SFP, Ethernet, SERDES, Arduino, DDR Memories, SPI Flash, CSI Camera, Image Processing, MIPI 
Board
 MAS LIFCL Evaluation Board This modular, flexible and easy-to-use CrossLink-NX 17 board is designed for video applications, including CSI2 MIPI, LVDS HDMI (through PMOD).
CrossLink-NX 
PMOD, LED Control, SPI Flash, I2C, SPI, UART, CSI-2, DisplayPort, DSI, HDMI, Image Processing, LVDS Video, MIPI, Video Bridge, Video Tx/Rx 
Board
 ProFRAME CamAD3 Camera Adapters ProFRAME camera adapters are mounted on the base board of the proFRAME video grabber and playback system. Supports GMSL 1/2/3 and FPD-Link III/IV interfaces.
MachXO3 
Infrared LED, LED Control, GPIO Control, I2C, SPI, UART, Wishbone, CSI-2, Image Processing, MIPI, Video Bridge 