MachXO3

Futureproof your control PLD and bridging designs

Simplified Control PLD Design and Debug – With multiple I/O banks, a wide range of signaling standards, per-pin programmability and the highest I/O-to-Logic ratio in the industry - Don’t trade off features and functionality. Integrate more capabilities into MachXO3 device family with up to 9400 LUTs and 384 I/O.

Secure and Reliable – Protect your designs from malicious attacks using password protection, and mitigate soft errors through state of the art Soft Error Detection and Soft Error Correction features.

Extended Temperature Flexibility – Realize your next automotive or rugged environmental design with automotive AEC-Q100 qualified XO3LF devices.

Features

  • Up to 9400 LUTs with up to 384 I/O pins
  • Instant-on 1 ms boot-up with background upgrade, Hitless I/O reconfigure and dual-boot error recovery
  • Available with 3.3/2.5 V core or low power 1.2 V core – including additional options on 9400 LUT devices
  • MachXO3LF includes programmable Flash and User Flash Memory (UFM)
  • Available in amazingly small (2.50 x 2.50 mm, 0.4 mm pitch) WLCSP packages and BGA packages with 0.50 mm and 0.80 mm pitch
Automotive

Jump to

Video

MachXO3-10KExpand Image

Control PLD for Embedded System Design

Family Table

MachXO3 Device Selection Guide
PARAMETERS MachXO3L-640/
MachXO3LF-640
MachXO3L-1300/
MachXO3LF-1300
MachXO3L-2100/
MachXO3LF-2100
MachXO3L-4300/
MachXO3LF-4300
MachXO3L-6900/
MachXO3LF-6900
MachXO3L-9400/
MachXO3LF-9400
Density LUTs 640 1300 2100 4300 6900 9400
Distributed RAM (kbits) 5 10 16 34 54 73
EBR SRAM (kbits) 64 64 74 92 240 432
UFM (kbits, MachXO3LF only) 64 64 80 96 256 448
VCC = 2.5 V/3.3 V - Yes
Yes
Yes
Yes
Yes
VCC = 1.2 V Yes
Yes
Yes
Yes
Yes
Yes
Temperature Grades1 C / I C / I / A2 C / I / A2 C / I / A2 C / I C / I
PLL 1 1 1 2 2 2
I2C 2 2 2 2 2 2
SPI 1 1 1 1 1 1
Timer/Counter 1 1 1 1 1 1
Oscillator 1 1 1 1 1 1
MIPI D-PHY Support Yes Yes Yes Yes Yes Yes
Multi Time Programmable NVCM MachXO3L MachXO3L MachXO3L MachXO3L MachXO3L MachXO3L
Programmable Flash MachXO3LF MachXO3LF MachXO3LF MachXO3LF MachXO3LF MachXO3LF

1. C = Commercial, I = Industrial, A = Automotive
2. Automotive grade devices available in MachXO3LF only

0.4 mm Spacing I/O Count
  640 1300 2100 4300 6900 9400
36-ball WLCSP (2.5 x 2.5 mm)1
28



49-ball WLCSP (3.2 x 3.2 mm)1

38


81-ball WLCSP (3.8 x 3.8 mm)1


63

0.5 mm Spacing I/O Count
  640 1300 2100 4300 6900 9400
121-ball csfBGA (6 x 6 mm)1 100 100 100 100

256-ball csfBGA (9 x 9 mm)1
206 206 206 206 206
324-ball csfBGA (10 x 10 mm)1

268 268 281
0.8 mm Spacing I/O Count
  640 1300 2100 4300 6900 9400
256-ball caBGA (14 x 14 mm)
2064 2064 2064 2062 2063
324-ball caBGA (15 x 15 mm)

2794 2794 2792
400-ball caBGA (17 x 17 mm)


3352 3352 3353
484-ball caBGA (19 x 19 mm)




3843

1. Package is only available for E=1.2 V devices
2. Package is only available for C=2.5 V/3.3 V devices
3. Package is available for both E=1.2 V and C=2.5/3.3 V devices
4. Package is available in automotive grade (MachXO3LF only)

Example Solutions

Control PLD

  • Non-volatile PLD (640 to 9400 LUTs & 28 to 384 I/O) provides widest application coverage in servers, communication boxes and industrial controllers.
  • Reduce cost and BOM by integrating hardware management functions, such as power thermal management and control PLD, into MachXO3 and L-ASC10.
  • Add features and fix bugs in-system without interrupting the system operation through Hitless I/O.
  • Complete board debug faster through on-chip debug using Reveal.

Motor Control Interface with MachXO3

  • Flexibility to interface with variety of motors used in Industrial, Automotive and other embedded systems
  • IGBT Protection and SPI interface allows real-time feedback to the MCU
  • Flexibility to support different communication standards at low power and fast response
  • Small footprint to accommodate space constrained applications

Battery Management Control using MachXO3

  • MachXO3 provides controller for the battery management for mobile and portable embedded systems
  • Intelligent cell balancing for charge equalization for each battery cell.
  • Control charge/ discharge process and receive real-time battery information like State of Charge (SOC) and State of Health (SOH)

Microprocessor Interface Expansion

  • Save cost by adding GPIO to low-cost microcontrollers
  • Add additional SPI and I2C interfaces to system control processors
  • Perform voltage level translation with ease
  • Simplify system management with PLD implementation of system status registers

CSI-2 Image Sensor Interfacing

  • Supports CSI-2 High Speed Differential Signaling
    • Both Rx and Tx interfaces
  • From 1-4 lanes of CSI-2 at up to 900 Mbps
  • Can be implemented in a 49 wlcsp (3.2 x 3.2 mm)
  • RAW, YUV or RGB supported

DSI LCD Display Interfacing

  • Supports DSI transmit signaling
    • HS (High Speed) Mode transmit
    • LP (Low Power) Mode transmit and receive
  • Can be implemented in a 49 wlcsp (3.2 x 3.2 mm)
  • Supports DSI formats RGB, YCbCr and User Defined
  • Input bus can also be DSI to enable LCD screen replacement

Design Resources

Intellectual Property & Reference Designs

Simplify your design efforts by using pre-tested, reusable functions

Software

Complete Design Flows, High Ease of Use

Development Kits & Boards

Our development boards & kits help streamline your design process

Programming Hardware

Take the strain out of in-system programming & in-circuit reconfiguration with our programming hardware

Documentation

To subscribe, or modify your subscription, to Document Notifications please login to your Lattice account

*By clicking on the "Notify Me of Changes" button, you agree to receive notifications on changes to the document(s) you selected.

Support

Technical Support

Need Help? We're Here to Assist You

Quality & Reliability

Reference Material to Help Answer Your Questions

Like most websites, we use cookies and similar technologies to enhance your user experience. We also allow third parties to place cookies on our website. By continuing to use this website you consent to the use of cookies as described in our Cookie Policy.