File Explorer

在下载文件之前Propel 2024.2 Patch for Close Loop BLDC Motion Control Reference Design，请您阅读并同意下列软件许可证协议：
                                                Software License Agreement
This Software License Agreement ("Agreement") is entered into by and between (A) Lattice SG Pte. Ltd., located at 150 Beach Rd., The Gateway West level 35, Singapore 189720 ("Lattice Singapore") and respectively (1) you, as an end user of the Software located outside of the United States, and (2) any legal entity, domiciled outside of the United States, acquiring the Software or on behalf of which you are accepting this Agreement and/or (B) Lattice Semiconductor Corporation, located at 5555 NE Moore Ct. Hillsboro, OR, 97124 USA ("Lattice USA") and respectively (3) you, as an end user of the Software located in the United States, and (4) any legal entity, domiciled in the United States, acquiring the Software or on behalf of which you are accepting this Agreement (Lattice Singapore and Lattice USA, as applicable, being "Lattice" and each person or entity described in (1)-(4) above being a "Licensee" and collectively "Licensees" in the following terms).
By proceeding with the installation or use of the Software:  
(1) You acknowledge you have read this Agreement, you understand it, and you agree to be bound by the terms and conditions of this Agreement; and 
(2) You represent that you are not an employee, agent of or otherwise affiliated with the following companies:  Aldec, Inc., Altium Limited, Blue Pearl Software Inc., Breker Verification Systems, Cadence Design Systems Inc., Dassault Systemes SE, Fintronic USA Inc., Mentor Graphics Corp. (including Siemens AG), Metrics Technologies Inc. (Montana Systems), SmartDV Technologies India Private Limited, Symphony EDA, Synopsys, Inc., SynthWorks Design, Inc., Sugawarea Systems, and Zuken Inc.; and (b) any other companies whose primary business is developing or providing FPGA logic simulation or synthesis solutions.
If you do not agree to the terms and conditions of this Agreement, including the Siemens EULA (attached as Exhibit B) and Synopsys EUSLMA (attached as Exhibit C), do not use, download, or install the Software, and if you have already obtained the Software from an authorized source, promptly return the media package and all accompanying items (including written materials and binders or other containers), and remove and destroy any electronic copies of Software in your possession, to the place you obtained them for a full refund of any applicable license fees.
Lattice and each Licensee agree as follows:
1.  DEFINITIONS
"Software" means the computer program(s) furnished to Licensee by Lattice, in whatever media, form and by whatever method, which are enabled for use pursuant to Lattice's software protection mechanism, and for which Licensee has paid any applicable license fees.  Software includes any related update or upgrade programs that may be added from time to time, but does not include any Third Party Components.
2.  SOFTWARE LICENSE
a.  Subject to your compliance with the terms herein, Lattice hereby grants to Licensee a non-exclusive, non-transferable license to use the Software on any computer possessed by Licensee on which the Software is designed to operate, such use to be in accordance with and subject to the terms and conditions of this Agreement.
b.  Pursuant to this Agreement, Licensee may (i) physically transfer any Software from one computer to another provided that the Software is used on only one such computer at a time and (ii) use the Software and any output files generated by the Software for the sole purpose of designing configurations for and programming semiconductor components manufactured by or for Lattice and sold by Lattice or its authorized distributors ("Lattice Devices") and (iii) make one (1) copy of the Software for Licensee's own use solely for backup or archive purposes.  Licensee may also merge the Software (or a portion thereof) into any other software to form an updated work; provided that, upon termination or expiration of Licensee's license, the Software shall be completely removed from the updated work and treated as if permission to merge had never been granted.  The use of any portion of the Software included in any such updated work remains at all times subject to the terms and conditions of this Agreement.
c.  Programmer Software License Terms.  Notwithstanding Section 2(b) of this Agreement, Lattice grants to Licensee the right to use and distribute, as part of Licensee's systems, the Lattice Embedded Programming Software (the "Programmer Software"), in compiled version, for the sole purpose of programming and reprogramming silicon devices supported by the Programmer Software.  Notwithstanding the foregoing, any output files generated by the Software may only be used to program Lattice Devices.  All intellectual property notices of Lattice and its partners included in the master copy of the Programmer Software shall be included in and upon any media or documentation distributed with any system that includes the Programmer Software.  Provided that the above conditions are met, Licensee may make multiple copies of the Programmer Software for use on multiple computers. The Lattice Embedded Programming Software is subject to the terms and conditions of the license set forth in Exhibit A.
d.  The Software can use or be used to create Modules, which are each one or more files that can be used to design, or be incorporated into a design being targeted to Lattice Devices, and which represents configuration data for functions, capabilities or operations to be performed by Lattice Devices.  Modules may be provided in source code form and can be created or accessed through other software or tools, including Lattice's Module/IP Manager software tool.  A particular Module may be provided by Lattice or by a third party, and usage thereof may be subject to a separate agreement between Lattice or such third party, and the terms and conditions of that separate agreement take precedence over this Agreement, to the extent in conflict herewith, but only with respect to that Module and license terms therefor.  Lattice hereby grants to Licensee a non-exclusive, non-transferable (except as explicitly allowed) license to: (i) modify Modules, which are provided in source code form, and create derivative works thereof for the sole purposes of designing configurations for and programming Lattice Devices; (ii) use Modules to design configurations for Lattice Devices used in Licensee's products; and (iii) distribute the Modules and resulting configurations in machine-executable (non-source) form only for use with Lattice Devices in Licensee's products.  Licensee further is granted rights to have the rights in (i)-(iii) performed by third parties on Licensee's behalf, so long as Licensee remains in all respects directly liable for all terms and conditions of this Agreement, and to sublicense the rights in (iii) to third parties subject to all of the terms and conditions under which Licensee can exercise such rights.
e.  Third Party Components. Certain files or components distributed with the Software are licensed from third parties and subject to separate license terms, which in the case of the Siemens and Synopsys software are found in Exhibits B and C respectively, or are contained in the applicable release notes, source or header files or other corresponding documentation ("Third Party Components"). Such Third Party Components are licensed to Licensee exclusively pursuant to the terms of their separate applicable license agreement.
f.  Licensee shall include Lattice's (and Lattice's suppliers', as applicable) copyrights, trademarks, and other proprietary notices on any copies and merged versions of the Software.
g.  Licensee shall not distribute, copy, transfer, lend, incorporate, modify, or use the Software for any purpose except as expressly provided herein.
h.  If Licensee fails to comply with the provisions of this Agreement, this license is automatically terminated.
j.  Except for the rights expressly granted herein to Licensee, title and all intellectual property rights in and to the Software and any copy of the Software which may be made by Licensee hereunder remain the sole and exclusive property of Lattice and/or Lattice's licensors.
k.  Licensee acknowledges that obtaining a license for the Software does not entitle Licensee to technical support from Lattice regarding the Software. However, Lattice will use commercially reasonable efforts to respond to technical support inquiries from Licensee regarding the Software.  Response times to inquiries for technical support are not guaranteed and will be established by Lattice in its sole discretion. 
3.  LIMITED WARRANTY AND REMEDIES
a.  If the Software has been provided on tangible media, then Lattice warrants to Licensee that the media containing the Software will be free from defects in materials and workmanship under normal use and service for a period of ninety (90) days from the date of delivery. 
b.  Subject to applicable laws, during the 90-day warranty period, the entire liability of Lattice and its licensors to Licensee, and Licensee's exclusive remedy under this warranty after Licensee's return of the defective Software media, will be for Lattice, at its option, either to replace any such Software media or refund any applicable license fee paid by Licensee to Lattice and terminate this License Agreement.  Any replacement Software or media will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer.
c.  Any products which are not returned to Lattice within the warranty period or which have been subject to accident, abuse, misuse, alteration, neglect, or unauthorized repair or installation are not covered by warranty.
4.  WARRANTY DISCLAIMER
EXCEPT FOR THE ABOVE EXPRESSED LIMITED WARRANTIES, LATTICE MAKES NO WARRANTIES ON THE SOFTWARE, WHETHER EXPRESSED, IMPLIED, STATUTORY, OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH LICENSEE, AND LATTICE SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  LATTICE DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET LICENSEE'S REQUIREMENTS, OR THAT LICENSEE'S OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.  LICENSEE ASSUMES RESPONSIBILITY FOR SELECTION OF THE SOFTWARE TO ACHIEVE ITS INTENDED RESULTS, AND FOR THE PROPER INSTALLATION, USE, AND RESULTS OBTAINED FROM THE SOFTWARE.  EXCEPT FOR THE ABOVE EXPRESSED LIMITED WARRANTIES, LICENSEE ASSUMES THE ENTIRE RISK OF THE SOFTWARE PROVING DEFECTIVE OR FAILING TO PERFORM PROPERLY AND IN SUCH EVENT, LICENSEE SHALL ASSUME THE ENTIRE COST AND RISK OF ANY REPAIR, SERVICE, CORRECTION, OR ANY OTHER LIABILITIES OR DAMAGES CAUSED BY OR ASSOCIATED WITH THE SOFTWARE.  LATTICE'S SOLE LIABILITY, AND LICENSEE'S SOLE REMEDY, IS SET FORTH ABOVE.  LATTICE DOES NOT WARRANT THAT USE OF THE SOFTWARE DOES NOT INFRINGE ON THIRD PARTIES' INTELLECTUAL PROPERTY RIGHTS.
5.  RESTRICTIONS
a. No right is granted hereunder to use the Software or any bitstream generated by the use of the Software to program or generate designs for any non-Lattice Devices.
b. Licensee shall not attempt to reverse translate, decompile or otherwise attempt to derive the source code of the Software.  In the event any source code is explicitly licensed to Licensee as part of the Software, such limitation will not apply to such source code.  
c. Licensee shall not alter or remove from the Software any copyright, trademark or other proprietary notices of Lattice and/or Lattice's licensors.  
d. Licensee shall not publish or disclose the results of any benchmarking activity of the Software, or use the results of such activities for any other software development activities.
Any use or attempted use of the Software in violation of the foregoing restrictions is a breach of the Agreement which will cause irreparable harm to Lattice, entitling Lattice to injunctive relief in addition to all legal remedies.
6.  LIMITATION OF LIABILITY
a.  Licensee agrees that Lattice's entire liability to Licensee and Licensee's sole remedy hereunder for any cause whatsoever, regardless of the form of the action, shall be limited to the price paid to Lattice for the Software.
b.  IN NO EVENT WILL LATTICE OR ANY OF ITS SUPPLIERS BE LIABLE TO LICENSEE OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, INCLUDING EXPENSES, LOST PROFITS, LOST SAVINGS, OR OTHER DAMAGES OF ANY SORT ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF LATTICE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
7.  TERM AND TERMINATION
a. Initial Term:  This Agreement shall begin as of the date that you first download, install or use the Software and shall continue for a period of one (1) year (the "Initial Term"). Siemens tools licenses are for a fixed period not to exceed one year, and are either Site Floating or Mobile Compute licenses as contained in Section 2.1.1 and Section 2.2 of the Siemens EULA terms in Exhibit B.  
b. Automatic Renewal: Upon the expiration of the Initial Term, this Agreement shall automatically renew for successive one (1) year terms (each a "Renewal Term," and collectively with the Initial Term, the "Term"), unless either party provides written notice of non-renewal to the other party at least thirty (30) days prior to the end of the then current Term, and provided that all license fee payments (including renewal payments) due from Licensee have been made in full.  If Licensee has a subscription license to use the Software, then Lattice will issue to Licensee an activation key that enables Licensee to run the Software for each Renewal Term, subject to payment of the applicable license fees.  In the event that Licensee fails to make payment in full for any such Renewal Term, then Licensee's right to use the Software and this Agreement will terminate at the end of the then-current Term.  The terms and conditions for Licensee's use of the Software pursuant to a renewal of a subscription license will be the same as set forth in this Agreement.  
c. Termination: This Agreement will terminate automatically in the event Licensee fails to perform any of its obligations hereunder.  Licensee may terminate this Agreement at any time by returning to Lattice the original and all copies of the Software or by destroying the Software together with all copies thereof, including all modifications and merged portions in any form.  Lattice may terminate this Agreement at any time for its convenience by providing thirty (30) days written notice, and will provide a pro rata refund of prepaid license fees to Licensee upon such termination for convenience. Upon expiration or termination of this Agreement by either party for any reason, Licensee shall either return to Lattice the original and all copies of the Software, or, upon Lattice's request, destroy such original and copies and provide Lattice with written certification of their destruction.  All licenses granted in Section 2 terminate on expiration or termination for any reason.  No refunds are provided except as provided in Section 3.  The obligations of Lattice and Licensee under the provisions of Sections 2(j), 4-11 and those of Licensee as set forth in the Siemens EULA in Exhibit B and in the Synopsys EUSLMA in Exhibit C will survive any termination of this Agreement.  
8.  EXPORT CONTROL
Licensee shall not export the Software or the direct product thereof without first obtaining any necessary U.S. or other governmental licenses and approvals.  In connection with such export control compliance, Licensee certifies as follows:
* that Licensee is not on the Denied Persons List maintained by the U.S. Bureau of Industry and Security;
* that Licensee is not on the list of Specially Designated Nationals and Blocked Persons maintained by the U.S. Department of the Treasury;
* that Licensee is not a citizen or resident of, or an agent of, Cuba, Iran, Iraq, North Korea, Sudan, or Syria, or any other country to which export of the referenced Software is prohibited, such as, but not limited to, by executive order of the President of the United States; and
* that Licensee is legally permitted, under all applicable export and commerce control laws and regulations, to receive the referenced Software.
9.  U.S. GOVERNMENT RESTRICTED RIGHTS
The Software and any accompanying documentation provided to agencies of the U.S. Government are "commercial computer software" and "commercial computer software documentation" pursuant to DFARS 227.7202 and FAR 12.212, and their successors. All use, reproduction, release, performance, display or disclosure of the Software and related documentation by or for the U.S. Government shall be in strict accordance with the terms and conditions of this Agreement.  Contractor/manufacturer is Lattice Semiconductor Limited c/o Lattice Semiconductor Corporation, 5555 NE Moore Ct., Hillsboro, Oregon, 97124 and its licensors.
10.  INFORMATION REGARDING PERSONAL DATA.
 If you downloaded this Software from our website, we have collected information about you, including your name and contact information, from the information you provided when you registered to use the website. If you acquired the Software from a source other than our website, we will ask you for certain information, including your name and contact information, as part of the installation procedure. Some of our Software comes bundled with software from third party providers, including Siemens and Synopsys, Inc.  If you obtain a license key from us for such Software, we will provide your name, corporate affiliation, address, phone number, fax number, and email address, along with information about the software version you have chosen, to the appropriate third party provider.  You consent to such information collection, storage, processing and provision by virtue of accepting this license or otherwise using any part of the Software.  Your rights with respect to your Personal Information is further explained in Lattice's privacy policy, found at https://www.latticesemi.com/About/LegalNotices/PrivacyPolicy.aspx.
11. FEEDBACK  
If Licensee provides any ideas regarding Software, including requests for changes or enhancements ("Feedback"), in the course of using or evaluating or using the Software, Licensee agrees that such Feedback may be used by Lattice without condition or restriction.
12.  FORCE MAJEURE.
Neither party will be liable for failure in performance due to any cause beyond its reasonable control provided the delayed party promptly notifies the other party and uses commercially reasonable efforts to promptly correct the failure.
13.  GENERAL.
IF LICENSEE IS LOCATED IN THE UNITED STATES, THIS AGREEMENT WILL BE GOVERNED BY THE LAWS OF THE STATE OF OREGON, U.S.A. WITHOUT REFERENCE TO ANY CONFLICT OF LAW PRINCIPLES.  IF LICENSEE IS LOCATED IN A COUNTRY OTHER THAN THE UNITED STATES, THIS AGREEMENT WILL BE GOVERNED BY THE LAWS OF THE REPUBLIC OF SINGAPORE WITHOUT REFERENCE TO ANY CONFLICT OF LAW PRINCIPLES.  THE APPLICATION OF THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS IS EXPRESSLY EXCLUDED. NOTHING IN THIS AGREEMENT WILL BE INTERPRETED OR CONSTRUED SO AS TO LIMIT OR EXCLUDE THE RIGHTS OR OBLIGATIONS OF LICENSEE OR LATTICE WHICH IT IS UNLAWFUL TO LIMIT OR EXCLUDE UNDER APPLICABLE LAWS, INCLUDING THE LAWS OF ANY MEMBER STATE OF THE EUROPEAN UNION WHICH IMPLEMENTS RELEVANT EUROPEAN COMMUNITIES COUNCIL DIRECTIVES. Except as specifically provided in this Agreement, Licensee may not sublicense, assign, or transfer this license or the Software.  Any attempted assignment, transfer or sublicense by Licensee in violation of this provision shall be void. Subject to the foregoing, this Agreement shall be binding upon and inure to the benefit of the successors and permitted assigns of the parties. The prevailing party in any legal action or arbitration arising out of this Agreement shall be entitled to reimbursement for reasonable attorneys fees and expenses, in addition to any other rights and remedies such party may have. This Agreement is the entire agreement between the parties with respect to use of the Software and supersedes any other communications or prior agreements, oral or written, regarding the Software.  If any provision of this Agreement is held invalid, the remainder of the Agreement shall continue in full force and effect. Lattice's failure to enforce or exercise any provision herein shall not be deemed a waiver of that provision.
Please direct all inquiries, in writing, to Lattice Semiconductor Corporation, 5555 NE Moore Ct., Hillsboro, Oregon, 97124.

Lattice Patent Rights
This Software is made available for use under a license from Lattice to all applicable U.S. and foreign patents, subject to the conditions and restrictions provided by this License Agreement.  Applicable patents are contained in the Legal Notice located at: http://www.latticesemi.com/About/LegalNotices.aspx
Lattice does not represent that products described herein are free from patent infringement or from any third-party right.
Trademark Rights
This Software may contain registered trademarks of Lattice or third parties.  Such trademarks are the property of their respective owners. 
The Software governed by this License Agreement is Copyright (c) 2018-2024 Lattice Semiconductor Corporation.  All rights reserved.
Rev. 10.2024

EXHIBIT A
LATTICE EMBEDDED PROGRAMMING SOFTWARE LICENSE TERMS
The Lattice Embedded Programming Software is subject to the following licensing terms:
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of Lattice Semiconductor Corporation, its affiliates, or the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.




EXHIBIT B 
Siemens EULA
Licensee’s use of any Siemens software included with the Software is subject to the terms found at https://www.siemens.com/sw-terms, as well as the Universal Customer Agreement found at https://www.siemens.com/sw-terms/uca, together with the Electronic Design Automation Supplemental Terms found at https://www.siemens.com/swterms/supplements (collectively, the "Siemens EULA"). 

EXHIBIT C
Synopsys EUSLMA
END-USER SOFTWARE LICENSE AND MAINTENANCE AGREEMENT
This agreement covers the products and services you license (or purchase) from Synopsys, unless and until we enter into a new agreement that expressly replaces this one.  If you use the Synopsys products and services as an employee of or for the benefit of your company, you represent that you have the power and authority to accept this agreement on behalf of your company.  Your company will be the licensee under this agreement.   By clicking on the "Accept" button of this agreement, or by downloading, installing or using the Synopsys products or services, you consent to the terms and conditions of this agreement on behalf of yourself and the company on whose behalf you will use the Synopsys products and services provided under this agreement.  The effective date of this agreement is the date that you first download, install or use the Synopsys products or services. If you do not agree to the terms and conditions of this agreement or if you do not have the power and authority to accept the terms and conditions of this agreement on behalf of your company, you may not use the Synopsys products and services and Synopsys is unwilling to provide you with them.

TERMS AND CONDITIONS

1. Products and Services
1.1. The Synopsys products and services that you may license or purchase under this agreement are identified in the Purchasing Agreements that you and Synopsys enter into from time to time under this agreement.  These products and services may include (but are not limited to):
(a) DesignWare, which means any software products (including Implementation IP and Verification IP), other than DesignWare Fee-Per-Use Cores, marketed by Synopsys under the brand name "DesignWare".
(b) Licensed Software, which means a Synopsys software product other than DesignWare and DesignWare Fee-Per-Use Cores.
(c) Maintenance Services, which means the software maintenance and support services described in section 5.
(d) Training Services, which means education in the use of Synopsys software products through standard curriculum educational services courses.
1.2. The term "Licensed Products" means Licensed Software and DesignWare.
1.3. Additional terms and conditions (beyond those stated here and in any attached supplements) may apply to certain Licensed Products.  When ordering these Licensed Products, you will be given an opportunity to review the additional terms and conditions that must be accepted for you to receive the Licensed Products.  If the additional terms and conditions conflict in any way with the terms and conditions stated here, the additional terms and conditions will prevail.
2. Licenses
2.1. Your License Rights:  When you purchase a license (other than an evaluation license) to a Licensed Product, upon its delivery you will have a nonexclusive right to:
(a) install the Licensed Product on one or more computers;
(b) install the License Key for the Licensed Product on the computer specifically identified in the License Key;
(c) allow your End Users to use the Licensed Product and Design Techniques, during the License Term, solely for the purpose of creating, modifying, and simulating your own Designs (in the case of DesignWare, this includes validating, testing, and simulating Designs, electronic circuits and devices);
(d) in the case of DesignWare, share Design Databases with a Licensed Design Partner only to allow the Licensed Design Partner to work cooperatively on your Design to the extent permitted by its own DesignWare license (but not sublicense or assign any of your rights in the DesignWare to such Licensed Design Partner);
(e) in the case of ARC Software Development Products, use this Licensed Product, during the License Term, solely for the purpose of creating, debugging, and profiling executable software source code for execution on a System-on-Chip with an embedded ARC microprocessor or on a model of such System-on-Chip;
(f) in the case of ARC MQX Products, until you discontinue the sale and distribution of the applicable ARC MQX Licensee Products, use the ARC MQX Products to (i) customize the Board Support Package Features in the ARC MQX Product solely as necessary for use with your ARC MQX Licensee Product; (ii) create and support an ARC MQX Licensee Executable; (iii) if you have purchased a license to the "closed system license" version of an ARC MQX Product, then you may distribute, solely in or with an ARC MQX Licensee Product, an ARC MQX Licensee Executable that does not expose, directly or indirectly, any APIs of the ARC MQX Product; and (iv) if you have purchased a license to the "binary" version of an ARC MQX Product, then you may additionally distribute to ARC MQX End Customers only that portion of the Documentation necessary for ARC MQX End Customers to access the APIs, provided that such ARC MQX End Customers are obligated not to expose any of the APIs to their customers or any other third parties.
(g) make a reasonable number of copies of the Licensed Product solely for backup or archival purposes; and
(h) make a reasonable number of copies of the Documentation for the Licensed Product and use the Documentation solely to support your use of the Licensed Product.
2.2. Implementation IP License:  In addition, when you are granted a license to any Implementation IP, you will have a nonexclusive right to:
(a) integrate the Implementation IP into your Designs to create one or more Integrated Designs; 
(b) make, use, and sell physical implementations (commonly referred to as semiconductor chips) of one or more of the Integrated Designs;
(c) distribute the Implementation IP in netlist or GDSII format as part of any of your Integrated Designs to any third party that provides foundry services to you, solely for the purpose of having that foundry make physical implementations of one or more of entire Integrated Designs of yours, as long as the third-party foundry is subject to confidentiality obligations regarding the Implementation IP that are no less restrictive than the confidentiality obligations in this agreement; and
(d) if you purchased from Synopsys the right to use certain Implementation IP in source code format, you may modify that Implementation IP in support of your development of Integrated Designs.
2.3. Node-Locked License.  If you have obtained the Licensed Product under a node-locked license, then a "node" refers to a specific machine and the License Product may be installed only on the number of nodes indicated on the applicable Synopsys Purchasing Agreement, must be used only on the node(s) on which it is installed, and may be accessed only by users who are physically present at that node.  Further, a node-locked license may only be used by one (1) user at a time running one (1) instance of the Licensed Product at a time.
2.4. Evaluation Licenses:  If you obtain an evaluation license for a Licensed Product, you will have the same license rights as described above except that you may use the Licensed Product only for the purpose of evaluating it and deciding whether to purchase a license to use it for production purposes.  You shall not use the Licensed Product to design any integrated circuits for production or pre-production purposes or any other commercial use including, but not limited to, for the benefit of your customers.  If you breach the forgoing restrictions, then you shall pay to Synopsys a license fee equal to Synopsys's perpetual list price plus maintenance for the commercial version of the Licensed Product.  You agree that damages for such a breach would be difficult to assess, and such payment represents a reasonable assessment of the potential damage to Synopsys.  You recognized and agree that this amount is a reasonable, liquidated amount and not a penalty. Also, evaluation copies of Licensed Products are provided "AS IS".  Therefore, the warranty and indemnification provisions in this agreement do not apply to evaluation licenses.
2.5. End Users: You may designate any of your employees whose primary work location is in the designated Use Area as End Users.  
2.6. Use Area; Telecommuting Employees; Use Over a WAN:  You must ensure that your End Users use the Licensed Product only when they are in the designated Use Area, except that any End User who is your employee, whose primary work location is in the designated Use Area, and whose primary residence is within 50 miles of the designated Use Area, may access the Licensed Product from his primary residence through a secure network that requires a secure ID card or other more protective security safeguards.  If you have purchased the right to use a Licensed Product over your wide area network (commonly referred to as a "WAN"), then unless the Purchasing Agreement states otherwise, the Licensed Product may be used by your End Users who are located at any of your facilities worldwide (if you purchased the right to use over a global WAN) or at any of your facilities on the same continent on which your Key Server is located (if you purchased the right to use over a continental WAN). This section 2.6 does not apply to Licensed Products obtained under a node-locked license as referenced in section 2.3.
2.7. Key Servers; Hardware Relocation: You may not permanently relocate a Key Server outside of the designated Use Area without obtaining written approval from Synopsys.  If a Key Server becomes inoperative due to malfunction, repair, or maintenance, you may request Synopsys's permission to set up and temporarily use a single back-up Key Server on another computer in the same Use Area until the original Key Server returns to service.
2.8. Conditions:  Your right to use the Licensed Product is conditioned upon your timely payment of the full amount of Fees due for the Licensed Product and your compliance with the terms and conditions of this agreement.  When the License Term expires, your license rights also expire and you may no longer use the Licensed Product.
2.9. Restrictions:  You may not (and may not allow anyone else to):
(a) copy or use any Licensed Product (or Documentation) in any manner that is not expressly allowed by the license rights stated above;
(b) decompile, reverse engineer, or otherwise attempt to derive the source code for any Licensed Product or any underlying algorithms, user interface techniques, or other ideas embodied in a Licensed Product;
(c) tamper with, or attempt to circumvent or disable, any License Key (this includes, for example, resetting the CPU time in order to extend the License Term, or using a false host ID number or additional virtualized copy(ies) of the host ID number to enable unauthorized copies of a License Key);
(d) distribute any copy of a Licensed Product (or Documentation) except as expressly allowed by the license rights stated above, or allow anyone other than your End Users to have access to or use (such as in a timesharing, service bureau, or application service provider model) any Licensed Product;
(e) use a Licensed Product (except ARC MQX Products) or its output to create, modify, or simulate Designs for third parties;
(f) use a Licensed Product or its output to develop or enhance any product that competes with a Synopsys product;
(g) modify or create a derivative work of any part of a Licensed Product or Documentation;
(h) disclose the results of any benchmarking of a Licensed Product (whether or not the results were obtained with assistance from Synopsys) to any third party; or
(i) use a Licensed Product in the development of any product if the failure or malfunction of that product could reasonably be expected to result in personal injury, death, or catastrophic loss.
If the License Key limits the number of End Users who may use a Licensed Product simultaneously or the number of simultaneous Clients, you must ensure that this limit is not exceeded, by platform virtualization or any other means.
2.10. Copies:  If you make backup or archival copies of a Licensed Product or Documentation, you must reproduce all copyright, trademark, and other notices that appear on the original copy.
2.11. Transfers and Assignments: You may not transfer or assign your license rights to any other person in any manner (by assignment, operation of law or otherwise) unless you have obtained written consent from Synopsys.  If you attempt to transfer or assign any of your license rights without Synopsys's consent, the transfer or assignment will be ineffective, null, and void (and you will be in material breach of this agreement).  For purposes of this section 2.11, a transfer or assignment of your license rights will be deemed to have occurred (a) if a third party (or group of third parties acting in concert) acquires beneficial ownership of fifty percent (50%) or more of either (i) your or a Parent Entity's assets or (ii) the stock or other equity interests entitled to vote for your or a Parent Entity's directors or equivalent managing authority, or (b) in the event of a merger, consolidation or other business combination between you or a Parent Entity and one or more third parties where your or a Parent Entity's stockholders immediately before that transaction own (directly or indirectly), after that transaction, less than fifty percent (50%) of the stock or other equity interests entitled to vote for the directors or equivalent managing authority of the surviving entity.
2.12. Open Source Software: The Licensed Product may be delivered with software that is subject to open source licensing terms ("Open Source Software"), which terms are available upon request. Certain Open Source Software licenses require that source code be made available upon request. Licensee may request a copy of such source code by post to Synopsys at: Synopsys, Inc., Attention: Open Source Software Requests, 690 East Middlefield Road, Mountain View, California 94043, USA. Licensee agrees that all Open Source Software shall be and shall remain subject to the terms and conditions under which it is provided. The Open Source Software is provided "AS IS," WITHOUT ANY WARRANTY OF ANY KIND, AND SYNOPSYS FURTHER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, WITH RESPECT TO OPEN SOURCE SOFTWARE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NEITHER SYNOPSYS NOR THE LICENSORS OF OPEN SOURCE SOFTWARE SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OPEN SOURCE SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  Copyrights to the Open Source Software are held by the copyright holders indicated in the copyright notices in the corresponding source files.
3. Order and Delivery
3.1. Ordering Synopsys Products:  You may order the products and services identified in the Purchasing Agreements at any time by submitting an order to Synopsys through Synopsys's on-line ordering system or as otherwise directed by Synopsys. When using Synopsys's on-line ordering system, you shall be responsible for ensuring that all information you provide is accurate and complete and that any person placing an order on your behalf has your authority to do so.  Once you submit an order, you may not cancel or change it.  Your order must indicate which products and services you want to purchase (including, in the case of Licensed Products, the type of license, the quantity, the License Term or in the case of ARC MQX Products the applicable ARC MQX Licensee Product, the location(s) of your facility(ies) where the Licensed Products may be used (we may refer to this as the "Authorized Sites" in a Purchasing Agreement), and any other information Synopsys would need to fulfill your order (including any information needed to generate a License Key).  Synopsys may, in its reasonable discretion, accept or reject your order.  Synopsys may accept your order by sending you written or electronic notice of acceptance or simply by fulfilling your order.
3.2. Delivery:  If Synopsys accepts your order for one or more Licensed Products, Synopsys will then deliver to you the Licensed Products along with the corresponding Documentation and License Keys.  Synopsys will deliver these materials to you electronically except where prohibited by law.
3.3. Electronic Software Transfer:  When Synopsys delivers a Licensed Product by electronic software transfer, Synopsys will send you an e-mail to your designated e-mail address(es) to notify you that the Licensed Product is available.  Synopsys's obligation to deliver the Licensed Product will be fulfilled when this e-mail notice is sent.  You will be responsible for downloading or requesting for delivery the Licensed Product and Documentation from the FTP Server and the License Key from Synopsys's website at www.synopsys.com, unless Synopsys gives you other instructions.  You must notify Synopsys in writing if you change your designated e-mail address(es).
3.4. Tangible Media:  When Synopsys delivers Licensed Products to you on tangible media, the media may contain other software programs in addition to the Licensed Products.  If it does, you will not have a license to use (and the License Keys for the Licensed Products will not permit you to use) these other software programs, and you must not attempt to access, use, reproduce, modify, reverse engineer, or otherwise tamper with these other software programs.  If you lose or damage the media, Synopsys will, at your request, provide a replacement at a nominal charge.  All deliveries of tangible items by Synopsys, Inc. will be made F.O.B. Origin; all deliveries of tangible items by other Synopsys entities will be made Ex Works (EXW) Origin.
4. Fees and Payment
4.1. Fees:  The Fees for the products and services you may purchase under this agreement will be identified in the Purchasing Agreements.  You agree to pay the Fees according to the payment terms in the applicable Purchasing Agreement.
4.2. Payments:  If the applicable Purchasing Agreement does not contain specific payment terms for the Fees in question, payment of those Fees will be due within 30 days after the date of Synopsys's invoice.  If you do not pay an amount by the scheduled due date, Synopsys will have the right to withhold the delivery of License Keys and/or terminate this agreement or a Purchasing Agreement and accelerate the due date of all remaining payments.  In this event, you will owe the entire outstanding balance as soon as you receive written notice from Synopsys that your payment is due.  All payments you make to Synopsys are non-refundable.  You may not offset any amounts you believe Synopsys owes you against any payments you make to Synopsys under this agreement.  You must make payments in U.S. dollars.  If you do not pay an amount by the due date, you must also pay a late payment charge of 1.5% per month or the highest rate permitted by law, whichever is less.
4.3. Taxes:  You will be solely responsible for paying all taxes (including sales, use, consumption, withholding, and value-added taxes and similar taxes), other than Synopsys's income taxes, that are imposed on or result from your purchase, license, or use of Synopsys products and services.  If Synopsys is required by law to collect and remit any such taxes, Synopsys may invoice you for such taxes and you agree to pay the invoiced amount to Synopsys.  If you are required by the respective jurisdiction where the Licensed Products are used, or where services are provided, to withhold taxes from payments to Synopsys, you may withhold from the total amount due to the respective Synopsys distributing entity the minimum amount required (but no more).  You may only withhold taxes related to a payment at the time of such payment.  You must then promptly pay that amount to the appropriate tax authority and provide Synopsys with an official receipt for the payment within 60 days of your payment.
4.4. Bankruptcy:  If you become the subject of any bankruptcy, dissolution, liquidation, or similar proceedings or make a general assignment for the benefit of your creditors, Synopsys may apply any payments you have previously made to Synopsys for products or services not yet delivered by Synopsys against any amounts you owe Synopsys at that time for products or services that have been delivered by Synopsys (under this agreement or otherwise).
5. Services
5.1. Maintenance Services:  Maintenance Services consist of the following:
(a) Support:  Synopsys will provide you with access to SolvNet and online Documentation and will use commercially reasonable efforts to make available the Synopsys Support Center on Monday through Friday, during Synopsys's normal business hours, excluding Synopsys's scheduled holidays. A valid corporate email address is required to access SolvNet and online Documentation.
(b) Updates:  Synopsys will use commercially reasonable efforts to provide Updates as they become generally available.  Any other upgrades or enhancements to the Licensed Products are not made available by Synopsys as part of Maintenance Services and may be subject to additional charges.
5.2. Updates to Terms:  Synopsys may update its Maintenance Services terms on 60 days prior written notice, provided that these updates are applied generally to its Maintenance Services customers.
5.3. Conditions:  In order to receive Maintenance Services for a Licensed Product, all of the following conditions must be met: 
(a) you must have purchased Maintenance Services for such Licensed Product (unless it is licensed under a TSL, in which case Maintenance Services are included);
(b) you must appoint a qualified contact person trained in the use of the Licensed Product to interface with Synopsys regarding Maintenance Services, and identify such person to Synopsys in advance; 
(c) you must provide Synopsys with access to the information and system facilities reasonably necessary to provide the Maintenance Services;
(d) you must follow the directions provided by the Synopsys Support Center to resolve technical problems;
(e) you must follow the operating instructions and procedures for the Licensed Product as specified in the Documentation or provided by Synopsys; and
(f) you must notify Synopsys of any error or other problem in the Licensed Product using Synopsys's current problem reporting procedure.
5.4. Exclusions:  Synopsys will have no obligation to provide Maintenance Services for any Licensed Products that are damaged, modified (by anyone other than Synopsys), incorporated into other software, or installed in any computing environment not supported by Synopsys; or for any version of a Licensed Product other than the latest and immediately preceding version; or for any problems caused by your negligence, abuse, misuse, or by any causes beyond Synopsys's reasonable control.
5.5. Reinstatement of Maintenance Services:  If Maintenance Services are terminated for any reason, or if you wish to renew Maintenance Services more than thirty (30) days after Maintenance Services have been terminated, you may be permitted to reinstate or renew Maintenance Services, at Synopsys's sole option, provided that (a) Synopsys offers Maintenance Services to its customers generally for the Licensed Product in question, and (b) you pay Synopsys the following: all applicable Maintenance Services fees for the period during which you were off Maintenance Services, and Synopsys's then-current reinstatement fee plus payment for the new Maintenance Services term.
5.6. ViewConnect:  If you wish to permit Synopsys to deliver Maintenance Services through the use of a shared customer desktop, you must download and install the ViewConnect Tool and related publicly-available, third-party software modules. You are not required to use the ViewConnect Tool, but if you choose to do so, you have the nonexclusive right to use the ViewConnect Tool only to enable Synopsys to remotely access your computer system for the purpose of providing Maintenance Services.  Your rights to the third-party software modules are separately described in their accompanying license terms.  The ViewConnect Tool and the third-party software modules are not Licensed Products nor is their use governed by this agreement.
5.7. Training Services:  Synopsys offers Training Services, which may be purchased and ordered through the online registration system found at www.synopsys.com.   
6. Confidentiality
6.1. Confidentiality Obligations:  Each party (you and Synopsys) agrees to abide by the following confidentiality obligations with respect to the other party's Confidential Information:
(a) do not disclose it to any third party unless (i) the other party has given its specific and express prior written approval, (ii) the disclosure is expressly allowed under this agreement, or (iii) the disclosure is necessary to comply with a valid court order or subpoena;
(b) do not use it for any reason other than to exercise its rights and perform its obligation under this agreement; and
(c) protect it from unauthorized dissemination in the same manner as that party protects its own Confidential Information, and in any event with reasonable precautions (which include limiting access to employees and contractors on a "need-to-know" basis).
6.2. Mandatory Disclosures:  If you believe you must disclose Synopsys's Confidential Information in order to comply with a valid court order or subpoena, you must promptly notify Synopsys and cooperate with Synopsys if Synopsys chooses to contest the disclosure requirement, seek confidential treatment of the information to be disclosed, or to limit the nature or scope of the information to be disclosed.  Synopsys will do the same if it believes it must disclose your Confidential Information in these circumstances.
6.3. Additional Obligations: In addition to your general obligations of confidentiality regarding the Licensed Products and Documentation, you must take the following steps to help prevent any unauthorized access to or use of the same:
(a) you must ensure that each End User who is your independent contractor (not your employee) has access to and uses the Licensed Products and Documentation only while working on your physical premises; and
(b) you must monitor each End User's use of the Licensed Products to ensure that the End User abides by the terms of this agreement.
7. Term and Termination
7.1. Term of Agreement:  The term of this agreement will begin on the effective date stated on the signature page and will end when the last Purchasing Agreement expires, unless this agreement is terminated sooner by either party.
7.2. Term of Purchasing Agreement: Each Purchasing Agreement will have its own term, as indicated on that Purchasing Agreement.
7.3. Rights to Terminate:  Each party has the right to terminate this agreement, by giving written notice of termination to the other party, if (a) the other party breaches this agreement and (b) either the breach cannot be cured or, if the breach can be cured, it is not cured by the breaching party within 15 days after receiving written notice of the breach from the non-breaching party.  An Error will not be considered a breach of this agreement that allows you to terminate the agreement, but it could give rise to a warranty claim under section 8.
7.4. Consequences of Termination:  If and when either you or Synopsys terminates this agreement, all Purchasing Agreements in effect at that time will also terminate.  When this agreement, a Purchasing Agreement or an individual license to a Licensed Product expires or is terminated:
(a) you must (i) immediately cease all use of the Licensed Products, Documentation, Design Techniques, and other Confidential Information, (ii) promptly return to Synopsys or destroy all copies of the Licensed Products, Documentation, and other Confidential Information in your possession or control, and (iii) certify in writing to Synopsys that you have complied with clauses (i) and (ii), except, however, that your license to Implementation IP incorporated into Designs prior to termination shall continue according to its terms;
(b) you will remain obligated to pay any amounts you owe to Synopsys at that time; and
(c) the provisions of sections 4, 6, 7.4, 8.4 and 10, and the warranty disclaimers in section 8, will remain in effect.
8. Limited Warranty
8.1. Warranty:  For a period of 90 days from when Synopsys delivers a Licensed Product to you (the "warranty period"), Synopsys warrants that the Licensed Product will have no Errors when used on the correct platform and according to the instructions in the corresponding Documentation.  This warranty will be void if you, or anyone else other than Synopsys, modifies or attempts to modify the Licensed Product.
8.2. Warranty Claims:  To claim a breach of this warranty, you must, during the warranty period, notify Synopsys in writing of the Error or Errors that you have encountered and provide Synopsys with all the information you have, in written or electronic form, about those Errors, so that Synopsys can attempt to reproduce, diagnose, and correct the Errors.
8.3. Exclusive Remedy:  Your exclusive remedy for any breach of this warranty is that Synopsys will use commercially reasonable efforts to (at Synopsys's option) correct the Errors you have reported or provide a replacement product that does not contain these Errors, or if Synopsys is unable to provide a correction or a replacement or determines that it will not be feasible to do so, Synopsys will refund the Fees you paid for that Licensed Product.
8.4. Disclaimer:  Except for the warranty in this Section 8, all Licensed Products, Documentation, Design Techniques, and any third-party software are provided "AS IS," without any other warranties of any kind.  Synopsys further disclaims all other warranties (express, implied, or statutory), including any warranties of merchantability, fitness for a particular purpose, title, or non-infringement and any warranties arising from a course of dealing or usage of trade.
9. Infringement Claims
9.1. Indemnity:  Synopsys will, at its own expense, be entitled to defend (or at its sole option, settle) any claim asserted against you by a third party that any Licensed Product you obtained from Synopsys under this agreement directly infringes any U.S. patent, copyright, trademark, or trade secret.  Synopsys will indemnify you for any damages you suffer and costs you reasonably incur that are directly attributable to any such claim and that are assessed against you in a final, non-appealable judgment or agreed upon by Synopsys in a settlement.
9.2. Conditions:  Synopsys's obligations to defend and indemnify you with respect to a particular claim are subject to the following conditions:
(a) you must promptly give Synopsys written notice of the claim;
(b) you must identify the specific Licensed Product(s) at issue in the claim and indicate how the Licensed Product(s) is(are) utilized by you or your products;
(c) you must give Synopsys sole control and authority over the defense and settlement of the claim; and
(d) you must provide Synopsys with all information you have regarding the claim and cooperate with Synopsys when Synopsys defends or attempts to settle the claim.
9.3. Pro-Active Steps:  If any Licensed Product is, or Synopsys believes is likely to become, the subject of a claim for which Synopsys would be obligated to defend and indemnify you, then Synopsys may, at its option, do any of the following:
(a) obtain for you (at no cost to you) the right for you to continue using the Licensed Product as permitted by this agreement;
(b) replace or modify the Licensed Product to avoid the infringement problem, as long as there is no material loss of functionality; or
(c) if Synopsys reasonably concludes that it will not be feasible to do either of the above, terminate your license for the Licensed Product and give you a prorated refund (based on how much of the License Term has elapsed) of the Fees you paid for that license.
9.4. Exclusions:  Synopsys will have no obligation to defend or indemnify you (notwithstanding the first paragraph of this section) with respect to any claim that is based on or attributable to any of the following:
(a) any modification made to the Licensed Product by anyone other than Synopsys;
(b) the combination or use of the Licensed Product with other products, processes, or materials not supplied by Synopsys or specified in the Documentation as being necessary to use the Licensed Product;
(c) your continued engagement in infringing activities after you were notified of the infringement or after Synopsys informed you of a modification or workaround that would have avoided the infringement; and
(d) your use of the Licensed Product in a manner not permitted by this agreement.
9.5. Burden of Proof: You will have the burden of showing that indemnification is required pursuant to this section 9 and that the exclusions in section 9.4 are not applicable.
9.6. No Other Obligations:  Except as expressly stated in this section 9, Synopsys has no obligation or liability to you for any actual or alleged infringement related to the Licensed Products, Documentation, or Design Techniques.  
10. Other Terms
10.1. Ownership of IP Rights: Synopsys and its licensors own all Intellectual Property Rights in the Licensed Products, Documentation, and Design Techniques.  Your only rights in the Licensed Products, Documentation, and Design Techniques are the rights expressly granted in this agreement; all other rights are reserved by Synopsys.  Synopsys's licensors are third-party beneficiaries of, and thus may enforce against you, the license restrictions and confidentiality obligations in this agreement with respect to their intellectual property and proprietary information. You will own all Intellectual Property Rights in the Designs you create using the Licensed Products, Documentation, and Design Techniques, subject to Synopsys's (and its licensors') ownership of the Intellectual Property Rights in the Licensed Products, Documentation, and Design Techniques.  Synopsys may freely use and disseminate any Feedback you provide.  You agree not to claim that Synopsys owes you any compensation for its use or dissemination of such Feedback.
10.2. Audit and Compliance: Synopsys may audit (using its own employees and those of an independent auditing firm that is subject to appropriate confidentiality obligations) your use of the Licensed Products and Documentation to verify your compliance with this agreement.  You agree to give Synopsys (or the auditing firm) reasonable access to your facilities and records for purposes of conducting these audits.  Synopsys will give you at least five days advance notice before conducting an audit.  Audits will be conducted during normal business hours and no more than once per year, unless Synopsys has a good-faith basis for believing that more frequent audits are warranted.  Synopsys will bear all the costs it incurs (including the fees and expenses of the auditing firm, if any) in conducting an audit, unless the audit reveals that you have failed to comply with this agreement in a material way, in which case you agree to reimburse Synopsys for these costs.
10.3. Automatic Updates: Licensed Products communicate with Synopsys servers for the purpose of providing Updates, detecting software piracy and verifying that customers are using Licensed Products in conformity with the applicable License Key for such Licensed Products. Synopsys will use information gathered in connection with this process to deliver software updates and pursue software pirates and infringers.
10.4. Limitation of Liability: For each product or service you license or purchase from Synopsys under this agreement, Synopsys's total, cumulative liability to you, including under section 9, is limited to the amount of Fees you paid for that product or service (regardless of the nature of the liability or the nature or number of claims giving rise to the liability).  Synopsys will not, under any circumstances or any theory of liability, be liable to you for any lost profits, loss of data, or consequential, incidental, or special damages arising from this agreement or the products and services provided to you under this agreement.  However, this disclaimer of Synopsys's liability for consequential damages does not limit or reduce Synopsys's obligations to defend and indemnify you under section 9.  The limitations of liability in this section are a fundamental part of this agreement and enable Synopsys to provide products and services to you at lower prices.  These limitations of liability are intended to apply even if an exclusive remedy is found to have failed of its essential purpose.
10.5. Export Controls: You shall remain familiar with your obligations under any and all laws, statutes, regulations, ordinances of any local, states, federal, national, or other jurisdictional locality, as applicable to the export, import, and/or end-use of Synopsys products, technology, and services.  Products and/or technology under this agreement may be subject to various Export Control Laws and Regulations including but not limited to, U.S. Export Administration Regulations (EAR), the U.S. Office of Foreign Asset Control (OFAC), the European Union (EU) Export Control Regime Regulation (EC) No. 428/2009, and/or the EU Consolidated Sanctions List.  Where a product and/or technology is identified as export controlled from the country(ies) of export to (1) the destination country(ies), (2) a restricted/proscribed end use, and/or (3) a restricted end user, a government-issued export license must be obtained prior to fulfillment under this agreement and in accordance with all applicable laws.  You agree that Synopsys shall not be required to complete delivery of export-controlled products or technology unless and until all required export licenses, have been obtained. 
10.6. Governing Law; Jurisdiction: This agreement is governed by the laws of the United States and the State of California, without regard to conflicts of laws principles.  The federal and state courts located in Santa Clara County, California have exclusive jurisdiction over any disputes arising from or relating to this agreement, and each party consents to such jurisdiction and venue.
10.7. Notices: Any notice, approval, consent, or other communication intended to have legal effect under this agreement must be given to the other party in writing, must be sent by first-class, registered, or overnight mail or private overnight courier (to the address for the other party stated on the signature page, unless the other party has given notice of a new address), and will be deemed given upon receipt or when delivery is refused.  A copy of any communication sent to Synopsys must also be sent to the attention of the General Counsel.
10.8. Waivers: Either party's failure to enforce any provision of this agreement will not be deemed a waiver of the future enforcement of that provision or enforcement of any other provision.  In order to be binding, a waiver must be in writing and signed by the party giving the waiver.
10.9. Independent Contractors: The parties to this agreement are independent contractors.  Neither party is the agent or partner of the other party or has any power or authority to act on behalf of the other party.
10.10. Severability: If any provision in this agreement is found to be invalid or unenforceable as written, the remaining provisions will remain in full force and effect and the invalid or unenforceable provision is to be construed (and, if necessary, modified) so that it is valid and enforceable to the greatest extent possible.
10.11. Attorneys' Fees: The prevailing party in any action to enforce this agreement will be entitled to recover costs and expenses including reasonable attorneys' fees.
10.12. Remedies: Except where this agreement expressly provides exclusive remedies, all rights and remedies of either party (including termination rights) are cumulative. You agree that monetary damages alone would not be an adequate remedy, and therefore Synopsys will be entitled to injunctive relief if you materially breach the license restrictions or confidentiality provisions in this agreement.
10.13. Force Majeure: Each party will be excused from performance of its obligations under this agreement, except payment obligations, to the extent that performance is rendered impossible by earthquake, fire, flood, governmental action, labor disruptions, supplier failures, or any other event or circumstance beyond that party's reasonable control.
10.14. Construction: Section headings in this agreement are for convenience only.  The word "including" (and variations thereof) is not intended to be limiting.  No rule of strict construction is to be used when interpreting this agreement. 
10.15. Counterparts: This agreement may be signed in multiple counterparts, each of which will be deemed an original and which together will constitute one instrument.
10.16. Press Release: The parties intend to work together to prepare and publish a mutually acceptable press release concerning this agreement.
10.17. Government Users: If you are a branch or agency of the United States Government or are acquiring any Licensed Product on behalf of any branch or agency of the United States Government, then the following provision applies.  The Licensed Products and Documentation are comprised of "commercial computer software" and "commercial computer software documentation", as such terms are used in 48 C.F.R. 12.212, and are provided to the Government (a) for acquisition by or on behalf of civilian agencies, consistent with the policy set forth in 48 C.F.R. 12.212; or (b) for acquisition by or on behalf of units of the Department of Defense, consistent with the policies set forth in 48 C.F.R. 227.7202-1 and 227.7202-3.
10.18. Synopsys Entities: Synopsys, Inc. and its wholly-owned subsidiaries, including, but not limited to, Synopsys International Limited, Synopsys International Limited Taiwan Branch, Synopsys Korea, Inc., Synopsys Technologies Company Limited and Nihon Synopsys, G.K., have agreed to their respective rights and obligations regarding the distribution of the Licensed Products and the performance of obligations related to the Licensed Products.  You acknowledge that: (a) Synopsys Inc. or any directly or indirectly wholly-owned subsidiary or branch of Synopsys, Inc. may treat a purchase order addressed to that entity, representative office or branch as having been addressed to the appropriate entity or entities or branch with distribution rights for the geographic region in which the Licensed Products will be used; and (b) delivery will be completed by the Synopsys entity or branch with distribution rights for the geographic region in which the Licensed Products will be used or service will be provided.  For products used or services provided in the Americas, Israel or Africa, the distributing Synopsys entity is Synopsys, Inc., based in California, USA.  For products used or services provided in Taiwan, the distributing Synopsys entity is Synopsys International Limited Taiwan Branch, based in Taiwan. For products used or services provided in the Republic of Korea, the distributing Synopsys entity is Synopsys Korea, Inc., based in the Republic of Korea. For products used or services provided in the People's Republic of China (PRC), the distributing Synopsys entity is Synopsys Technologies Company Limited or Synopsys International Limited.  For products used or services provided in Russia, the distributing Synopsys entity is Synopsys LLC (Moscow) or Synopsys, Inc.  For products used or services provided in Japan, the distributing Synopsys entity is Nihon Synopsys G. K., based in Japan. For products used or services provided in any country other than those identified above, the distributing Synopsys entity is Synopsys International Limited, based in Ireland.
10.19. Entire Agreement: This agreement and any applicable attachments and Purchasing Agreements are the entire agreement between the parties concerning its subject matter, and supersede any prior or contemporaneous agreements, communications, or understandings (whether written or oral).  However, any confidentiality or nondisclosure agreements that Synopsys previously entered into with you will remain in effect (according to their terms) with respect to the confidential information disclosed thereunder.  
10.20. Amendments: This agreement may be amended only by means of a written instrument signed by authorized representatives of both parties that specifically refers to this agreement and states the parties' intention to amend it.  No additional or inconsistent terms on any purchase order or similar document you may submit to Synopsys will be binding on Synopsys or have any legal effect.


Glossary of Definitions
API means application programming interface for accessing specific functionality of an ARC MQX Product.
ARC MQX End Customer means a customer to whom you distribute an ARC MQX Licensee Product and who shall be obligated to maintain the confidentiality of any provided Documentation, and not expose any API of the ARC MQX Product to any third party.
ARC MQX Licensee Executable means an application program, in executable form, statically linked with and using certain APIs of an ARC MQX Product, for execution solely on an embedded ARC processor.
ARC MQX Licensee Product means a product owned by you, that is specifically identified to Synopsys in a Purchasing Agreement or other document accepted by Synopsys, and that incorporates an embedded processor and the ARC MQX Licensee Executable. 
ARC MQX Product means the Synopsys real-time operating system platform for the ARC processor architecture including associated source files, application programming interfaces files, and utilities for use in creating applications that run on the ARC processor architecture.
ARC Software Development Product means any MetaWare Products, nSIM Products and xCAM Products.
Board Support Package Features means those configuration files in an ARC MQX Product that define hardware components with which the ARC MQX Licensee Executable is intended to interoperate.
Client means an instance of a Licensed Product running on a computer.  This means, for example, that two Clients can be either two instances of a Licensed Product running on the same computer or one instance of a Licensed Product running on each of two computers.
Confidential Information of Synopsys means (a) the Licensed Products (in any form), the Documentation, the License Keys, and SolvNet; (b) Design Techniques and all ideas and information (such as algorithms, design rules, and design techniques) contained or embodied in the Licensed Products, Documentation, License Keys, or SolvNet; (c) the prices, discounts, payment terms, and other information in the Purchasing Agreements; (d) Synopsys Training Services materials including without limitation presentations, demonstrations, software and course handouts, and (e) any other confidential or proprietary information that Synopsys provides to you in connection with this agreement.  Your Confidential Information is any confidential or proprietary information in (i) written form that you provide to Synopsys in order for Synopsys to fulfill your orders and provide products and services to you under this agreement, and (ii) oral form that you provide to Synopsys in order to receive Maintenance Services; as long as you notify Synopsys at the time of disclosure that such information is to be treated as confidential under this agreement.  However, Feedback is not your Confidential Information.  Also, Confidential Information does not include any of the following:
(a) information that has become generally available to the public, through no fault of yours (in the case of Synopsys Confidential Information) or Synopsys (in the case of your Confidential Information) and that is not still regarded as a trade secret under laws governing information that was negligently or maliciously distributed;
(b) information that the receiving party had already obtained in a tangible form, through lawful means, before obtaining it under this agreement;
(c) information that the receiving party developed independently, without the use of any materials or information obtained from the other party in connection with this agreement; 
(d) information that the receiving party has lawfully obtained, in a tangible form, from a third party that had the right to provide it to the receiving party; or
(e) information that the disclosing party releases for publication in writing.
Design means a representation of an electronic circuit or device that you create through the use of one or more Licensed Products.  The representation may exist in various formats including, but not limited to, equations, truth tables, schematic diagrams, textual descriptions, hardware description languages, executable software source code and netlists.
DesignWare has the meaning given in section 1 of the Terms and Conditions.
Design Database means a design database for your Design that incorporates DesignWare in any format (except unencrypted source code for Implementation IP), along with all copyright and other proprietary legends for such DesignWare.
Design Techniques means Synopsys-supplied algorithms, data, circuit and logic elements, libraries, rule bases, search strategies, and other technical information used in the process of creating Designs.
DesignWare Fee-Per-Use Core means an IP core (as this term is understood in the semiconductor industry) for which Synopsys charges an additional fee each time it is used in the design of an integrated circuit.
Documentation means any user manuals, reference manuals, release, application and methodology notes, written utility programs, and other materials in any form provided by Synopsys for use with a Licensed Product.
End User means an individual who works for you as an employee or independent contractor and whom you designate and authorize to access and use a Licensed Product as permitted by this agreement.
Error means a defect in a Licensed Product that causes it to deviate substantially from the specifications in the corresponding Documentation.
Feedback means any ideas or suggestions you voluntarily provide to Synopsys (in any manner, whether in writing or orally or otherwise) regarding the Licensed Products, Documentation, or Design Techniques, including possible enhancements or improvements.
Fees means the amounts you must pay when you purchase products and services from Synopsys under this agreement, as identified in each Purchasing Agreement.
FTP Server means a Synopsys server that you can access via the Internet in order to download Licensed Products you have ordered.
Implementation IP means synthesizable designs (other than Verification IP).
Integrated Design means a Design that combines Implementation IP with the Design and does not consist primarily of Implementation IP.
Intellectual Property Rights means all patent rights, copyrights, trade secret rights, mask works, and trademark rights (including service marks and trade names), and any applications for these rights, in all countries.
Key Server means the computer with the host I.D. number that is identified in the License Key and which controls access to and enables the use of a Licensed Product.
License Key means a document (in physical or electronic format) provided by Synopsys that identifies: (a) the Licensed Product, including version number, licensed to you; (b) the Key Server; (c) the number of permitted Clients; and (d) the codes that initialize use of the Key Server.
License Term means the period of time during which you may use a Licensed Product under a particular license.
Licensed Design Partner means a third party that (a) you have engaged to work with you on a common Design; and (b) has a valid Synopsys end user license agreement for the DesignWare used in your Design.
Licensed Products has the meaning given in section 1 of the Terms and Conditions.
Licensed Software has the meaning given in section 1 of the Terms and Conditions.
Maintenance Services has the meaning given in section 1 of the Terms and Conditions.
MetaWare Product means a Synopsys software development tool used to create, profile and debug software applications that run on an embedded microprocessor, identified by Synopsys with the product name "MetaWare".
nSIM Product means a Synopsys software model of the instruction set of an embedded ARC microprocessor, identified by Synopsys with the product name "nSIM".
Open Source Software has the meaning given in section 2.12 of the Terms and Conditions. 
Parent Entity means a person, company or other entity that owns, directly or indirectly, more than fifty percent (50%) of your assets or of the stock or other equity interests entitled to vote for your directors or equivalent managing authority.
Purchasing Agreement means the applicable Synopsys sales quotation, FSA schedule, purchase agreement or other agreement describing (among other things) the products and services that you have licensed or purchased, including pricing information.
SolvNet means Synopsys's suite of online support services accessible via the Internet.
Synopsys Competitor means any corporation or other legal entity in the business of developing and/or marketing (including making generally commercially available to end user customers) one or more electronic design automation software products or intellectual property cores or related services.
System-on-Chip means an integrated circuit which integrates the microcontroller, microprocessor, peripherals and interfaces in a single Design.
TSL means a time-based technology subscription license of a Licensed Product. A TSL lasts for a specific period of time (the License Term) from when the license is delivered and includes (at no additional charge) Maintenance Services for the Licensed Product in question.
Updates means error corrections and minor improvements to the Licensed Products. 
Use Area for a Licensed Product means a single geographical site that you own or occupy as your place of business, which may consist of one or more buildings located within 5 miles of one another, and in which the Key Servers, Clients, and End Users for that Licensed Product are all located, except as modified by the right to allow End Users to telecommute or use over a WAN in section 2.6.
Verification IP means test benches (including software models, test suites, and monitors) that simulate, test, and verify the functionality of certain electronic circuits or devices.
WAN means a wide area network as referred to in section 2.6.
xCAM Product means a Synopsys software development tool that creates and uses cycle-accurate software models of an embedded ARC microprocessor, identified by Synopsys with the product name "xCAM".
You (and variations thereof) means the entity that signs or agrees to this agreement as the customer.

Additional Notices:
- This Software uses Eigen (C++ template library for linear algebra), which is released under the MPL v2.  Source code for Eigen is available at   https://eigen.tuxfamily.org/index.php?title=Main_Page.  A copy of the MPLv2 can be obtained at https://www.mozilla.org/MPL/2.0/
- This Software includes elements of RippleFPGA.  RippleFPGA is Copyright (c) 2019 by The Chinese University of Hong Kong. All Rights Reserved. CU-SD LICENSE (adapted from the original BSD license) Redistribution of the any code, with or without modification, are permitted provided that the conditions below are met. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.  Neither the name nor trademark of the copyright holder or the author may be used to endorse or promote products derived from this software without specific prior written permission.  Users are entirely responsible, to the exclusion of the author, for compliance with (a) regulations set by owners or administrators of employed equipment, (b) licensing terms of any other software, and (c) local, national, and international regulations regarding use, including those regarding import, export, and use of encryption software.   THIS FREE SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR ANY CONTRIBUTOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, EFFECTS OF UNAUTHORIZED OR MALICIOUS NETWORK ACCESS; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- The Software uses ABC: System for Sequential Synthesis and Verification (http://www.eecs.berkeley.edu/~alanmi/abc/).  Copyright © The Regents of the University of California.  All rights reserved.  Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, modify, and distribute this software and its
documentation for any purpose, provided that the above copyright notice and
the following two paragraphs appear in all copies of this software.  IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
我已阅读并同意上述许可证协议。
Industrial Solution

解决方案集合

汽车

工厂自动化

其他工业领域

客户端计算

解决方案集合

数据中心和边缘计算

无线

有线

家庭

移动

解决方案集合

Avionics and UAVs

Solution Stacks

MILCOM

Space

Guidance Systems

网络边缘AI解决方案

基于FPGA的安全方案

解决方案集合

控制和安全

FPGA平台

General Purpose FPGA

超低功耗

视频互连

软件工具

解决方案

解决方案集合

支持中心

软件许可

质量和可靠性

设计服务

编程

保障供应链安全

培训

停产产品

旧版本软件和文档

合作伙伴项目

伙伴类型

销售导航

销售导航

销售导航

莱迪思产品

停产的产品

关于莱迪思

投资者关系

新闻中心

职业中心

License Clickthrough Agreement

ABOUT LATTICE

SALES

SUPPORT

FOLLOW
