Lattice Solutions

Everything you need to quickly and easily complete your design

Solution Type
Device Support



















Tags


























































































Providers
  • Key Phrase Detection

    Reference Design

    Key Phrase Detection

    Continuous searches for a key phrase utterance via a digital MEMS microphone. Can be re-configured to work with any trained word or phrase.
  • Human Face Identification

    Reference Design

    Human Face Identification

    Uses a Convolutional Neural Network in the ECP5 FPGA to detect a human face, and match to known registered faces. Can be adapted to work with any other object.
  • Human Presence Detection

    Reference Design

    Human Presence Detection

    Uses Lattice sensAI IP to continuously search for the presence of a human and reports results. Can be adapted to detect any other object.
  • Object Counting

    Reference Design

    Object Counting

    An example object counting application based on the Lattice sensAI stack. Includes SPI, DDR IP blocks, ISP engine, 8 CNN engines and a counting / overlay engine
  • 1 to N MIPI CSI-2/DSI Duplicator

    Reference Design

    1 to N MIPI CSI-2/DSI Duplicator

    Modular MIPI/D-PHY Reference Design - Duplicate one MIPI CSI-2 channel to N DSI channels
  • 4 to 1 Image Aggregation with CrossLink-NX

    Reference Design

    4 to 1 Image Aggregation with CrossLink-NX

    Modular MIPI/D-PHY Reference Design - Aggregates four MIPI CSI-2 inputs to a single output stream.
  • MIPI CSI-2 Virtual Channel Aggregation

    Reference Design

    MIPI CSI-2 Virtual Channel Aggregation

    Modular MIPI/D-PHY Reference Design - Adaptable and flexible solution combines multiple MIPI CSI-2 inputs to a single CSI-2 output stream.
  • MIPI DSI/CSI-2 to OpenLDI LVDS Interface Bridge

    Reference Design

    MIPI DSI/CSI-2 to OpenLDI LVDS Interface Bridge

    Modular MIPI/D-PHY Reference Design - Complete solution integrates the Byte to Pixel Converter, CSI-2/DSI D-PHY Receiver and FPD-LINK (OpenLDI) Transmitter
  • N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation

    Reference Design

    N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation

    Modular MIPI/D-PHY Reference Design - Aggregate multiple MIPI CSI-2 inputs up to 5 channels horizontally line by line to a single CSI-2 output
  • SubLVDS to MIPI CSI-2 Image Sensor Bridge

    Reference Design

    SubLVDS to MIPI CSI-2 Image Sensor Bridge

    Modular MIPI/D-PHY Reference Design - Complete solution integrates the Pixel to Byte Converter, SubLVDS Image Sensor Recevier and CSI-2/DSI D-PHY Transmitter
  • Single Wire Aggregation

    Reference Design

    Single Wire Aggregation

    Use a low-cost FPGA to aggregate multiple data streams such as I2C, UART, I2S and GPIO in TDM fashion, transmit a over single wire, and de-aggregate.
  • MachXO3D ESB Implementing AES128/AES256 Encryption and Decryption

    Reference Design

    MachXO3D ESB Implementing AES128/AES256 Encryption and Decryption

    Shows how to use the MachXO3D Embedded Security Block (ESB) to implement AES128 or AES256 encryption or decryption.
  • I2C Bus Master

    Reference Design

    I2C Bus Master

    Demonstrates how a fast and configurable I2C-Bus Master Controller can be constructed and utilized in a Lattice CPLD/FPGA device
  • I2C Master - WISHBONE Compatible

    Reference Design

    I2C Master - WISHBONE Compatible

    Based on the OpenCores I2C master core, this Reference Design provides a bridge between the I2C and WISHBONE bus
  • PDM Microphone Aggregation

    Reference Design

    PDM Microphone Aggregation

    Aggregate up to 8 PDM microphones and connection to a processor over I2S or SPI with no impact in audio quality. Ideal for beam-forming. PCM output at 48HKz.
  • Image Sensor Bridge

    Reference Design

    Image Sensor Bridge

    Interfaces a CMOS camera to a Digital Video Port (DVP) for a low-power low-footprint solution.
  • Infrared Remote Tx/Rx Reference Designs

    Reference Design

    Infrared Remote Tx/Rx Reference Designs

    Implements an interface to IR receive and/or IR transmit. This includes PWM (pulse width modulation) timing and protocol conversion to an SPI /I2C bus
  • Long Range (LoRa) Wireless

    Reference Design

    Long Range (LoRa) Wireless

    Implement a LoRa compliant device using a tiny iCE40 UltraPlus FPGA, for low-power, low-footprint wireless communication over miles
  • Graphics Acceleration

    Reference Design

    Graphics Acceleration

    Enables a processor to save power in sleep mode while the low-power iCE40 UltraPlus drives a mobile DSI display, and monitors for wake-up signals.
  • RGB LED Reference Design

    Reference Design

    RGB LED Reference Design

    A complete RGB LED design that controls the color, blinking rate, brightness and breathing of an RGB LED.
  • Page 1 of 7
    First Previous
    1 2 3 4 5 6 7
    Next Last
    Like most websites, we use cookies and similar technologies to enhance your user experience. We also allow third parties to place cookies on our website. By continuing to use this website you consent to the use of cookies as described in our Cookie Policy.