TICO-RAW Encoder/Decoder IP-cores

Unleashing image sensors dataflows with innovative low power RAW compression

Reduce bandwidth and power consumption – With TICO-RAW, you can process more pixels from the sensor and easily handle RAW images with higher resolution, higher frame rate and high dynamic range.

Get the lowest latency ("pixel-line") to transmit RAW Color Filter Array (CFA) data over your network, infrastructures, interfaces.

Features

  • Lossless RAW quality – Mathematically lossless / Near-lossless / Visually lossless / Lossy down to 1 bpp
  • Low power and Small size – low logic and memory usage (no external DDR)
  • Zero-latency – Few lines of latency (1/10th of 1 millisecond)
  • Multiple resolutions – any up to 200 megapixels at any frame rate
  • Better pixels – HDR support / 8,10,12,16-bit sensor data support

Jump to

Block Diagram

TICO-RAW encoder / decoder IP-cores Block Diagram

Typical Configurations

IP-CORES
-ENC / -DEC
Color
sampling
Sensor
Bit depth
Max Frame per
sec. / res.
examples
at 100 MHz* at 250 MHz*
IPX-TICO-RAW-2K
(up to 2048-pixel width)
RAW CFA Bayer 8, 10, 12, 14, 16 2048 x 1080
2048 x 2048
335
177
839
442
IPX-TICO-RAW-4K
(up to 4096-pixel width)
RAW CFA Bayer 8, 10, 12, 14, 16 4096 x 2160
4096 x 4096
84
44
209
110
IPX-TICO-RAW-8K
(up to 8192-pixel width)
RAW CFA Bayer 8, 10, 12, 14, 16 7680 x 4000
8192 x 4320
8192 x 8192
24
21
11
60
52
28

* Max Frequency (MHz) of the IP-cores can be adjusted according to your selected pixel per clock architecture and your targeted FPGA.

Ask for your configuration

Ordering Information