Applications
- Industrial & Auto
  Industrial Solution
  
  Industrial Overview
  
  Solution Stacks
  
  Lattice Automate
  Lattice Drive
  Lattice mVision
  Lattice sensAI
  Lattice Sentry
  Automotive
  
  Automotive Overview
  ADAS / Driver Assistance
  Functional Safety
  Infotainment
  Quality & Reliability
  Factory Automation
  
  Functional Safety
  Machine Vision
  PLCs
  Robotics
  Other Industrial
  
  Medical
  Video Surveillance
  Embedded
  Holoscan Sensor Bridge Solutions
- Comms & Computing
  Client Computing
  
  Notebooks / PCs
  Printers
  Tablets
  
  Solution Stacks
  
  Lattice mVision
  Lattice ORAN
  Lattice sensAI
  Lattice Sentry
  Datacenter Systems
  
  Platform Firmware Resiliency
  Servers
  OCP Ready Solutions
  Storage
  Switches
  Wireless
  
  5G Open RAN
  HetNet Small Cells
  Low Power Radios
  Millimeter Wave Radios
  Wireline
  
  10 Gbps Ethernet MAC
  Hitless Updates
  Intelligent SFP
  RGMII to GMII Bridge
- Consumer
  Prosumer Electronics
  
  IoT & Wearables
  VR Head Mounted Display
  Smart Home
  
  Consumer Robots & Toys
  Home Control & Security
  Solution Stacks
  
  Lattice mVision
  Lattice sensAI
- Aerospace & Defense
  Avionics and UAVs
  
  Avionics
  UAVs
  
  Solution Stacks
  
  mVision
  sensAI
  MILCOM
  
  Software Defined Radio
  Satellite Communications
  Space
  
  New Space
  Launchers
  Guidance Systems
  
  Missiles
  Smart Munitions
- Edge AI
  Edge AI Solution
  
  Edge AI Overview
- Security
  FPGA-Based Security
  
  Security Overview
  Solution Stacks
  
  Lattice Sentry
Products
- FPGAs & Other Devices
  Control & Security FPGA
  
  MachXO5-NX
  Mach-NX
  MachXO4
  MachXO3D
  MachXO3
  MachXO2
  L-ASC10
  
  Platforms
  
  Lattice Avant
  Lattice Nexus
  Lattice Nexus 2
  General Purpose FPGA
  
  Avant-X
  Avant-G
  Avant-E
  Certus-N2
  CertusPro-NX
  Certus-NX
  ECP5 & ECP5-5G
  Ultra Low Power FPGA
  
  iCE40 UltraPlus
  iCE40 Ultra
  iCE40 UltraLite
  iCE40 LP/HX
  Video Connection FPGA
  
  CrossLinkU-NX
  CrossLink-NX
  CrossLinkPlus
  CrossLink
  VIEW ALL DEVICES →
- Software Tools
  Software Tools
  
  Lattice Diamond
  Lattice Propel
  Lattice Radiant
  Lattice sensAI Studio
  Lattice sensAI EVE SDK
  Software Licensing
  VIEW ALL SOFTWARE TOOLS →
- Solutions
  Solutions
  
  Community Sourced
  Demos
  IP Cores
  IP Modules
  Kits & Boards
  Reference Designs
  Programming Hardware
  Embedded
  Solution Stacks
  
  Lattice Automate
  Lattice Drive
  Lattice mVision
  Lattice ORAN
  Lattice sensAI
  Lattice Sentry
  VIEW ALL SOLUTIONS →
Support
- Support
  Support
  
  Knowledge Base
  Submit / Review Support Tickets
  Customer Information Request
  EXPLORE HELP CENTER →
- Software Licensing
  Software Licensing
  
  Licensing Support Center
  IP Licensing Support
  New IP License Request
  IP License Bundles
  Academic License Request
- Quality & Reliability
  Quality & Reliability
  
  Quality & Reliability Information
  Export Classification Information
  Product Change Notifications (PCNs)
  Part Number Reference Guide
  Customer Information Request
- Services
  Design Services
  
  Lattice Design Group
  Product Services
  Secure Supply Chain
  
  Lattice SupplyGuard
  Training
  
  Lattice Insights
  Discontinued Products
  
  Mature & Discontinued Devices
- Legacy Devices & Software
  Legacy Products
  
  FPGA Software Archive
  Silicon Image Software Archive
- Lattice Partner Network
  Partner Program
  
  Program Overview
  Find Partners
  Explore Partner Solutions
  Partner Type
  
  IP Cores
  Design Services
  Boards
  Programming Services
  EDA
  Embedded
Buy
- Americas Sales
  Sales Locator
  
  Brazil
  Canada
  Mexico
  Puerto Rico
  USA
  VIEW ALL →
- Europe & Africa Sales
  Sales Locator
  
  Finland
  France
  Germany
  Israel
  Italy
  Norway
  Spain
  Sweden
  United Kingdom
  VIEW ALL →
- Asia Pacific Sales
  Sales Locator
  
  Australia
  China
  India
  Indonesia
  Japan
  Singapore
  South Korea
  Taiwan
  Vietnam
  VIEW ALL →
- Online Store
  Lattice Products
  
  Silicon Devices
  Software, Cables, & Boards
  BUY ONLINE →
- Discontinued Products
  Discontinued Products
  
  Rochester Electronics
  Arrow Electronics
Blog
About Lattice
- About Lattice
  About Lattice
  
  About the Company
  Corporate Stewardship
  Contact Us
- Investor Relations
  Investor Relations
  
  Investor Overview
  Online Investor Kit
  Investor FAQ
  Board Of Directors
  Management
  Corporate Governance
  SEC Filings
  Quarterly Earnings
  Analysts
  Ethics
- Newsroom
  Newsroom
  
  Announcements
  Blogs
  Upcoming Product Events
  Image Library
  Video Library
  Webinar Library
  Media Contacts
- Careers
  Careers
  
  Careers Homepage
  Search Job Openings
  Our Benefits
Sign In
Register
en

License Clickthrough Agreement

Before downloading the file CrossLink-NX ISP Demo,please read and agree to the following Software License Agreement:

                                                EVALUATION BOARD REFERENCE MATERIALS LICENSE AGREEMENT

This is a legal agreement between you, the end user, and Lattice SG Pte. Ltd. ("Lattice"). This Agreement concerns your rights to use this file and any accompanying written materials (the "Reference Materials").  By proceeding with the download or use of the Reference Materials, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not download or use the Reference Materials.
Lattice and the individual or entity acquiring the Reference Materials ("Licensee") agree as follows:
1.     License.  
a.     Lattice hereby grants to Licensee a non-exclusive, nontransferable license to use and reproduce the Reference Materials internally for the sole purpose of evaluating designs incorporating Lattice programmable logic products on the Lattice Evaluation Board.  Licensee may not sell or otherwise distribute the Reference Materials to its end customers or any other third party. Licensee is solely responsible for any designs created using the Reference Materials.  
b.     Licensee agrees not to remove or destroy any copyright notices, proprietary markings, or confidential legends placed upon, contained within, or associated with the Reference Materials. 
c.     Licensee will not distribute, copy, transfer, lend, incorporate, modify, or use the Reference Materials for any purpose except as expressly provided herein. If Licensee fails to comply with the provisions of this Agreement, this Agreement is automatically terminated.  Except for the rights expressly granted herein to Licensee, the title and all intellectual property rights in and to the Reference Materials and any copy of the Reference Materials which may be made by Licensee hereunder remain the sole and exclusive property of Lattice and/or Lattice's licensors.
2.     Warranty Disclaimer.  THE REFERENCE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESSED, IMPLIED, STATUTORY, OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH LICENSEE.  LATTICE SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. LICENSEE ASSUMES RESPONSIBILITY FOR SELECTION OF THE REFERENCE MATERIALS TO ACHIEVE ITS INTENDED RESULTS AND FOR THE PROPER USE AND RESULTS OBTAINED FROM THE REFERENCE MATERIALS. LICENSEE ASSUMES THE ENTIRE RISK OF THE REFERENCE MATERIALS OR ANY DESIGN LICENSEE CREATES USING THE REFERENCE MATERIALS PROVING DEFECTIVE OR FAILING TO PERFORM PROPERLY, AND IN SUCH EVENT, LICENSEE WILL ASSUME THE ENTIRE COST AND RISK OF ANY REPAIR, SERVICE, CORRECTION, OR ANY OTHER LIABILITIES OR DAMAGES CAUSED BY OR ASSOCIATED WITH THE REFERENCE MATERIALS.
3.     Limitation of Liability.  Licensee agrees that Lattice's entire liability arising under this Agreement and Licensee's sole remedy hereunder for any cause whatsoever, regardless of the form of the action, will be limited to the amount of monetary consideration, if any, paid to Lattice for the Reference Materials. IN NO EVENT WILL LATTICE OR ANY OF ITS SUPPLIERS BE LIABLE TO LICENSEE OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER CHARACTERIZED AS EXPENSES, LOST PROFITS, LOST SAVINGS, OR OTHER DAMAGES OF ANY SORT, ARISING OUT OF THE USE OF OR INABILITY TO USE THE REFERENCE MATERIALS, EVEN IF LATTICE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY LIMITED REMEDIES HEREIN. 
4.     Default and Termination.  This Agreement will continue indefinitely, until and unless terminated. It will terminate automatically in the event Licensee fails to perform any of its obligations hereunder. Licensee may terminate this Agreement at any time by returning to Lattice the original and all copies of the Reference Materials or by destroying the Reference Materials together with all copies thereof. Upon termination of this Agreement for any reason, Licensee will either return to Lattice the original and all copies of the Reference Materials, or upon Lattice's request, destroy such original and all copies and provide Lattice with written certification of their destruction. The parties agree that their respective rights, obligations and duties, which by their nature extend beyond the termination of this Agreement shall survive any termination. 
5.     Export Control.  Licensee agrees and certifies that the Reference Materials will not be exported, directly or indirectly, into any country to which such export is prohibited by the United States Export Administration Act and the regulations thereunder without the required authorization from the United States government, nor will the Reference Materials be used for any purpose prohibited by the same.
6.     Government Use.  The Reference Materials and any accompanying documentation provided to agencies of the U.S. Government are "commercial computer software" and "commercial computer software documentation" pursuant to DFARS 227.7202 and FAR 12.212, and their successors. All use, reproduction, release, performance, display or disclosure of the Reference Materials and related documentation by or for the U.S. Government shall be in strict accordance with the terms and conditions of this Agreement.  Contractor/manufacturer is Lattice Semiconductor Limited c/o Lattice Semiconductor Corporation, 5555 NE Moore Court, Hillsboro, Oregon 97124 and its licensors.
7.     General.  This Agreement will be governed by the laws of the State of Oregon, U.S.A., without reference to any conflict of laws principles. Licensee may not sublicense, assign, or transfer this Agreement or the Reference Materials. THIS AGREEMENT IS THE ENTIRE AGREEMENT BETWEEN THE PARTIES WITH RESPECT TO THE SUBJECT MATTER AND SUPERSEDES ANY OTHER COMMUNICATIONS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, REGARDING THE REFERENCE MATERIALS. If any provision of this Agreement is held invalid, the remainder of the Agreement will continue in full force and effect. The prevailing party in any legal action arising out of this Agreement will be entitled to reimbursement for reasonable and actual attorney's fees and expenses, in addition to any other rights and remedies such party may have.

I have read and agree to the above License Agreement.

ABOUT LATTICE

SALES

SUPPORT

FOLLOW

Legal Notices |
Privacy Policy |
Site Map |
Use of Cookies |
Accessibility Statement

Industrial Solution

Solution Stacks

Automotive

Factory Automation

Other Industrial

Client Computing

Solution Stacks

Datacenter Systems

Wireless

Wireline

Prosumer Electronics

Smart Home

Solution Stacks

Avionics and UAVs

Solution Stacks

MILCOM

Space

Guidance Systems

Edge AI Solution

FPGA-Based Security

Solution Stacks

Control & Security FPGA

Platforms

General Purpose FPGA

Ultra Low Power FPGA

Video Connection FPGA

Software Tools

Solutions

Solution Stacks

Support

Software Licensing

Quality & Reliability

Design Services

Secure Supply Chain

Training

Discontinued Products

Legacy Products

Partner Program

Partner Type

Sales Locator

Sales Locator

Sales Locator

Lattice Products

Discontinued Products

About Lattice

Investor Relations

Newsroom

Careers

License Clickthrough Agreement

ABOUT LATTICE

SALES

SUPPORT

FOLLOW