Description:
The user can alter the sysConfig settings via bitstream generation command, this can be done using the following methods:
Note: In this example, BACKGROUND_RECONFIG was used.
Solution:
(1) Through Bitstream Strategy Settings Command Line:
(2) Through Tcl command:
bitgen -w -g BACKGROUND_RECONFIG:ON -g REGISTER_INIT:ON -s */ADC_LMN_test.secproj -gui ADC_LMN_test_impl_1.udb
Note: The valid -g BACKGROUD_RECONFIG values are "OFF", "ON", "SRAM_EBR", "SRAM_ONLY".
From the *.bgn file, it is validated that the BACKGROUND_RECONFIG value is changed to "ON" in the bitstream.