AK-MACHXO2-7000 Development Board

The AK-MACHXO2-7000 is a low-cost development platform featuring the MachXO2-7000 FPGA, Ethernet, SDRAM, microSD, serial flash, UART, VGA output and an embedded JTAG programmer.

This unique board has everything you need to quickly evaluate the high density (6864 LUTs) MachXO2 FPGA. Implementing your own designs is easy: just power and program the board by using a standard USB type-B cable from a host PC. A connector for 5V power supply is available too. Two expansion headers provide access to GPIO and can be easily reached by probes or jumper wires.

Connectivity can be achieved through the 10/100 Mb Ethernet connector and the serial port. The VGA output, the LEDs and the push-buttons allows you to implement different levels of user interfaces. Data and graphics can be stored on the serial flash or by using the microSD slot.


  • MachXO2 LCMXO2-7000, HC version
  • 32 Mbit SPI Flash & 64 Mbit SDRAM Memory
  • On-board USB controller (FTDI) for programming (JTAG), control (UART) and power
  • 2 × 20 and 2 × 12 expansion headers
  • 3 user push-buttons plus reset push-button
  • 4 user LEDs
  • RJ45 connector for 10/100 Mb Ethernet
  • RS232 UART & VGA R2R connector
  • 25 MHz clock oscillator
  • microSD slot
  • Powered from USB cable or external 5V DC power supply
  • RoHS compliant

Jump to

Kit Contents

  • AK-MACHXO2-7000 Development Board

Board Photos

Side View

Click image to enlarge


Click image to enlarge


Click image to enlarge

Ordering Information

  • Part Number: AK-MACHXO2-7000
  • The board can be purchased directly from ARTEKIT


Documentation and Downloads for this board can be downloaded directly from the ARTEKIT website.


Technical Support

Need Help? We're Here to Assist You

Quality & Reliability

Reference Material to Help Answer Your Questions