LatticeECP2 Advanced - TI ADS6000 EVM Interface Card

This interface card is used to connect the LatticeECP2 Advanced Evaluation board to an evaluation module for the TI ADS6000 family. Both the LatticeECP2 Advanced Evaluation board and the Texas Instruments (TI) ADS6000 EVM are available separately. The interface card connects to the high-speed Molex/SPI4.2 connector on the LatticeECP2 Advanced Evaluation Board, and a high-density SAMTEC connector on the TI ADS64xx EVM. The interface uses LVDS I/O.

TI ADS6000 Family and Evaluation Modules

TI offers a generic evaluation module (EVM) for the ADS6000 family. This same base EVM design is available for various members of the ADS6000 family. For general evaluation, Lattice recommends using the ADS6425 EVM. The ADS6425 device is a Quad Channel 12-Bit 125-MSPS ADC. the LatticeECP2/M Reference Design enables quick verification of its performance. The reference design described below is intended for use with the TI ADS6425 EVM.

To learn more about the TI ADS6000 family, and purchase a TI ADS6425 EVM, please visit the TI web site. Click on the link for the ADS6xxx device you want, then scroll down to the "Tools and Software" section to learn more about the evaluation module and/or purchase from the TI on-line store.

LatticeECP2 Advanced Evaluation Board

The LatticeECP2 Advanced Evaluation Board includes a rich variety of on-board functions and connectors to help you evaluate the LatticeECP2 FPGA performance in a variety of application spaces. To learn more about this board, please visit the LatticeECP2 Advanced Evaluation Board web page.

Required Software

  • ispLEVER for design, fitting, place & route of Lattice programmable devices. If you don't have a copy of the ispLEVER software, the LatticeECP2-50 FPGA is supported in the downloadable ispLEVER-Starter software. The ispLEVER software includes the Reveal logic analyzer, which is used in the demonstration program.
  • ispVM software is used to program the LatticeECP2 FPGA.

Jump to

Kit Contents

  • Lattice ECP2 Advanced - TI ADS6000 Interface Card
  • Demo documentation (Note: To ensure you are using the latest version, demo code and source files should be downloaded from this web page)

Important: To use this card you will need both a TI ADS6XXX EVM (available from TI) and a LatticeECP2 Advanced Evaluation Board (available from Lattice). These are described below, and available separately. These boards are NOT included with the Interface Card (LFE2-H-IC-EV).

Board Photos

Top View

Click image to enlarge

Ordering Information

  • This product is no longer available for purchase.

  • The information provided here is for reference purposes only.
  • Reference Number: LFE2-H-IC-EV
  • Contact your local Lattice sales representative for further information.

Documentation

快速参考
下载
标题 编号 版本 日期 格式 文件大小
Lattice TI ADC Demo User's Guide
Describes the Lattice-TI ADC demo. The demo code is available for download separately, titled: Demonstration Design for the Lattice-TI ADS6xxx Interface.
UG04 5/22/2013 PDF 609.6 KB
标题 编号 版本 日期 格式 文件大小
Demonstration Design for the Lattice-TI ADS6xxx Interface
This is the standard demonstration design for use with the LatticeECP2 Advanced board, plus TI ADS6xxx (e.g. ADS6425) EVM, and the Lattice-TI Interface Card. Includes source code. See UG04 for description of the design operation.
5/22/2013 ZIP 1.8 MB

支持

技术支持

有问题?我们来帮助您

质量和可靠性

相关参考资料有助于解决您的问题