アプリケーション
- 産業用
  Industrial Solution
  
  Industrial Overview
  
  Solution Stacks
  
  Lattice Automate
  Lattice Drive
  Lattice mVision
  Lattice sensAI
  Lattice Sentry
  Automotive
  
  Automotive Overview
  ADAS / Driver Assistance
  Functional Safety
  Infotainment
  Quality & Reliability
  Factory Automation
  
  Functional Safety
  エンベッデッドビジョン
  自動車
  AI / 機械学習
  Other Industrial
  
  HDMIインターフェースブリッジ
  Video Surveillance
  Embedded
  Holoscan Sensor Bridge Solutions
- 通信
  Client Computing
  
  Notebooks / PCs
  Printers
  Tablets
  
  Solution Stacks
  
  Lattice mVision
  Lattice ORAN
  Lattice sensAI
  Lattice Sentry
  データセンター＆エッジコンピューティング
  
  プラットフォームレジリエンス(PFR)
  データセンターシステム – サーバー
  ストレージ
  ストレージ
  Switches
  無線
  
  5G Open RAN
  HetNetスモールセル
  小電力無線
  ミリメートル波無線
  有線
  
  10GbpsイーサネットMAC
  ヒットレスアップデート
  インテリジェントSFP
  RGMIIからGMIIへのブリッジ
- 民生用
  家電製品
  
  AI / 機械学習
  エンベッデッドビジョン
  モバイル
  
  エンベッデッドビジョン
  AI / 機械学習
  Solution Stacks
  
  Lattice mVision
  Lattice sensAI
- Aerospace & Defense
  Avionics and UAVs
  
  Avionics
  UAVs
  
  Solution Stacks
  
  mVision
  sensAI
  MILCOM
  
  Software Defined Radio
  Satellite Communications
  Space
  
  New Space
  Launchers
  Guidance Systems
  
  Missiles
  Smart Munitions
- Edge AI
  Edge AI Solution
  
  Edge AI Overview
- Security
  FPGA-Based Security
  
  Security Overview
  Solution Stacks
  
  Lattice Sentry
製品
- プログラマブルロジック
  Control & Security FPGA
  
  MachXO5-NX
  Mach-NX
  MachXO4
  MachXO3D
  MachXO3
  MachXO2
  L-ASC10
  
  Platforms
  
  Lattice Avant
  Lattice Nexus
  Lattice Nexus 2
  General Purpose FPGA
  
  Avant-X
  Avant-G
  Avant-E
  Certus-N2
  CertusPro-NX
  Certus-NX
  ECP5 & ECP5-5G
  Ultra Low Power FPGA
  
  iCE40 UltraPlus
  iCE40 Ultra
  iCE40 UltraLite
  iCE40 LP/HX
  Video Connection FPGA
  
  CrossLinkU-NX
  CrossLink-NX
  CrossLinkPlus
  CrossLink
  VIEW ALL DEVICES →
- Software Tools
  Software Tools
  
  Lattice Diamond
  Lattice Propel
  Lattice Radiant
  Lattice sensAI Studio
  Lattice sensAI EVE SDK
  Software Licensing
  VIEW ALL SOFTWARE TOOLS →
- Solutions
  Solutions
  
  Community Sourced
  Demos
  IP Cores
  IP Modules
  Kits & Boards
  Reference Designs
  Programming Hardware
  Embedded
  Solution Stacks
  
  Solution Stacks Overview
  Lattice Automate
  Lattice Drive
  Lattice mVision
  Lattice ORAN
  Lattice sensAI
  Lattice Sentry
  VIEW ALL SOLUTIONS →
サポート
- テクニカルサポート
  Support
  
  回答データベース
  テクニカルサポートを受ける
  Customer Information Request
  EXPLORE HELP CENTER →
- ライセンス
  Software Licensing
  
  Licensing Support Center
  IP Licensing Support
  New IP License Request
  IP License Bundles
  Academic License Request
- 品質及び信頼性
  Quality & Reliability
  
  品質及び信頼性のホーム
  輸出分類情報
  製品変更のお知らせ（PCN）
  品番参考ガイド
  Customer Information Request
- サービス
  Design Services
  
  Lattice Design Group
  Product Services
  Secure Supply Chain
  
  Lattice SupplyGuard
  Training
  
  Lattice Insights
  Discontinued Products
  
  Mature & Discontinued Devices
- レガシーデバイス及びソフトウェア
  Legacy Products
  
  FPGAソフトウェアアーカイブ
  Silicon Imageソフトウェアアーカイブ
- Lattice Partner Network
  Partner Program
  
  Program Overview
  Find Partners
  Explore Partner Solutions
  Partner Type
  
  IP Cores
  Design Services
  Boards
  Programming Services
  EDA
  Embedded
購入
- 南北アメリカ地域セールス
  Sales Locator
  
  ブラジル
  カナダ
  メキシコ
  プエルトリコ
  アメリカ
  VIEW ALL →
- ヨーロッパ・アフリカ地域セールス
  Sales Locator
  
  フィンランド
  フランス
  ドイツ
  イスラエル
  イタリア
  ノルウェー
  スペイン
  スウェーデン
  イギリス
  VIEW ALL →
- アジア太平洋地域セールス
  Sales Locator
  
  オーストラリア
  中国
  インド
  インドネシア
  日本
  シンガポール
  韓国
  台湾
  ベトナム
  VIEW ALL →
- オンラインストア
  Lattice Products
  
  半導体デバイス
  ソフトウェア、ケーブル、及びボード
  BUY ONLINE →
- 製造中止商品
  Discontinued Products
  
  ロチェスターエレクトロニクス‎
  アロー・エレクトロニクス
ブログ
会社案内
Sign In
Register
ja-JP

License Clickthrough Agreement

Before downloading the file EtherCAT with Single-Axis Motor Control Reference Design - Source Code,please read and agree to the following Software License Agreement:

                                                REFERENCE DESIGN LICENSE AGREEMENT 

This is a legal agreement between you, the end user, and Lattice Semiconductor Corporation if you are an end user located in the United States and Lattice SG Pte. Ltd. if you are an end user located in a country other than the United States. "Lattice" in this Agreement means Lattice Semiconductor Corporation or Lattice SG Pte. Ltd. By proceeding with the installation or use of the reference design software made available by Lattice to you ("Reference Design"), you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not use, download or install the Reference Design, and if you have already obtained the Reference Design from an authorized source, promptly return the media package and all accompanying items (including written materials and binders or other containers) to the place you obtained them.
For purposes of this Agreement, any modified versions of the Reference Design that have been changed or customized by Lattice for Licensee (as defined below) after download by Licensee are subject to the terms and conditions of this Agreement.
Lattice and the individual or entity acquiring the Reference Design ("Licensee") agree as follows:
1.     Object Code License.  Lattice grants to Licensee a personal, non-exclusive, non-transferable right to use the Reference Design selected for download in object code form for the sole purpose of programming Lattice programmable logic devices. Licensee's end customers may use Lattice programmable logic devices that have been programmed with the Reference Design. Except for the rights expressly granted herein, the title and all intellectual property rights in and to the Reference Design remain the sole and exclusive property of Lattice or Lattice’s licensors. Licensee agrees not to remove or destroy any copyright notices, proprietary markings, or confidential legends placed upon, contained within, or associated with the Reference Design. Licensee will not distribute, copy, transfer, lend, incorporate, modify, or use the Reference Design for any purpose except as expressly provided herein. If Licensee fails to comply with the provisions of this Agreement, this Agreement is automatically terminated.
2.     Source Code License.  If the Reference Design is made available in source code form, Lattice grants to Licensee a personal, non-exclusive, non-transferable right to use and modify the Reference Design selected for download in source code form for the sole purposes of creating and implementing design to program Lattice programmable logic devices. Any use or attempted use of the Reference Design in violation of the foregoing restrictions is a breach of the Agreement which will cause irreparable harm to Lattice, entitling Lattice to injunctive relief in addition to all legal remedies, and will result in automatic termination of this Agreement. Licensee agrees to hold confidential the source code and any other information which is furnished hereunder using the same degree of care as Licensee uses for its own confidential information, but in no event less than reasonable care and not to disclose such information to any third party. This obligation will not apply to information that (a) is in or enters the public domain without breach of this Agreement by Licensee; or (b) is rightfully received by Licensee from a third party without a duty of confidentiality; or (c) is independently developed by Licensee without use of Lattice's intellectual property; or (d) is already known to Licensee at the time of disclosure under this Agreement as shall be proved by contemporaneous written records; or (e) is made public by Lattice.
3.     Warranty Disclaimer.  THE REFERENCE DESIGN AND ANY DESIGN SERVICES PROVIDED BY LATTICE ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESSED, IMPLIED, STATUTORY, OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH LICENSEE.  LATTICE SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. LATTICE DOES NOT WARRANT THAT USE OF THE REFERENCE DESIGN WILL BE UNINTERRUPTED OR ERROR FREE. LICENSEE ASSUMES RESPONSIBILITY FOR SELECTION OF THE REFERENCE DESIGN TO ACHIEVE ITS INTENDED RESULTS AND FOR THE PROPER INSTALLATION, USE, AND RESULTS OBTAINED FROM THE REFERENCE DESIGN. LICENSEE ASSUMES THE ENTIRE RISK OF THE REFERENCE DESIGN PROVING DEFECTIVE OR FAILING TO PERFORM PROPERLY, AND IN SUCH EVENT, LICENSEE WILL ASSUME THE ENTIRE COST AND RISK OF ANY REPAIR, SERVICE, CORRECTION, OR ANY OTHER LIABILITIES OR DAMAGES CAUSED BY OR ASSOCIATED WITH THE REFERENCE DESIGN.
4.     Limitation of Liability.  Licensee agrees that Lattice's entire liability arising under this Agreement and Licensee's sole remedy hereunder for any cause whatsoever, regardless of the form of the action, will be limited to the amount of monetary consideration, if any, paid to Lattice for the Reference Design. IN NO EVENT WILL LATTICE OR ANY OF ITS SUPPLIERS BE LIABLE TO LICENSEE OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER CHARACTERIZED AS EXPENSES, LOST PROFITS, LOST SAVINGS, OR OTHER DAMAGES OF ANY SORT, ARISING OUT OF THE USE OF OR INABILITY TO USE THE REFERENCE DESIGN, EVEN IF LATTICE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY LIMITED REMEDIES HEREIN. 
5.     Export Control.  Licensee agrees and certifies that the Reference Design will not be exported, directly or indirectly, into any country to which such export is prohibited by the United States Export Administration Act and the regulations thereunder without the required authorization from the United States government, nor will the Reference Design be used for any purpose prohibited by the same.
6.     Default and Termination.  This Agreement will continue indefinitely, until and unless terminated. It will terminate automatically in the event Licensee fails to perform any of its obligations hereunder. Licensee may terminate this Agreement at any time by returning to Lattice the original and all copies of the Reference Design or by destroying the Reference Design together with all copies thereof. Upon termination of this Agreement for any reason, Licensee will either return to Lattice the original and all copies of the Reference Design, or upon Lattice's request, destroy such original and all copies and provide Lattice with written certification of their destruction. In addition, upon termination of this Agreement for any reason, Licensee will destroy all bitstream programming files that contain the Reference Design and provide Lattice with written certification of their destruction. Notwithstanding anything to the contrary, in the event of termination of this Agreement or any license granted herein, Licensee’s end customers may continue to sell and use systems containing the Reference Design previously and properly sublicensed in accordance with the terms hereof prior to such termination. The parties agree that their respective rights, obligations and duties, which by their nature extend beyond the termination of this Agreement shall survive any termination. 
7.     Government Use.  The Reference Design and any accompanying documentation provided to agencies of the U.S. Government are "commercial computer software" and "commercial computer software documentation" pursuant to DFARS 227.7202 and FAR 12.212, and their successors. All use, reproduction, release, performance, display or disclosure of the Reference Design and related documentation by or for the U.S. Government shall be in strict accordance with the terms and conditions of this Agreement.  Contractor/manufacturer is Lattice Semiconductor Limited c/o Lattice Semiconductor Corporation, 111 SW Fifth Avenue, Suite 700, Portland, Oregon 97204 and its licensors.
8.     General.  If Licensee is located in the United States, this Agreement will be governed by the laws of the State of Oregon, U.S.A., without reference to any conflict of law principles. If Licensee is located in a country other than the United States, this Agreement will be governed by the laws of the Republic of Singapore, without reference to any conflict of law principles. The application of the United Nations Convention on Contracts for the International Sales of Goods is expressly excluded. Licensee may not sublicense, assign, or transfer this Agreement or the Reference Design. THIS AGREEMENT IS THE ENTIRE AGREEMENT BETWEEN THE PARTIES WITH RESPECT TO THE SUBJECT MATTER AND SUPERSEDES ANY OTHER COMMUNICATIONS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, REGARDING THE REFERENCE DESIGN. If any provision of this Agreement is held invalid, the remainder of the Agreement will continue in full force and effect. The prevailing party in any legal action arising out of this Agreement will be entitled to reimbursement for reasonable and actual attorney's fees and expenses, in addition to any other rights and remedies such party may have. 
©2017 Lattice Semiconductor Corporation.  You may freely distribute the text of this Agreement provided you include this copyright notice.  However, modifications to the substantive terms herein are not permitted.  
20170327

I have read and agree to the above License Agreement.

会社情報

購入する

サポート

FOLLOW

Industrial Solution

Solution Stacks

Automotive

Factory Automation

Other Industrial

Client Computing

Solution Stacks

データセンター＆エッジコンピューティング

無線

有線

家電製品

モバイル

Solution Stacks

Avionics and UAVs

Solution Stacks

MILCOM

Space

Guidance Systems

Edge AI Solution

FPGA-Based Security

Solution Stacks

Control & Security FPGA

Platforms

General Purpose FPGA

Ultra Low Power FPGA

Video Connection FPGA

Software Tools

Solutions

Solution Stacks

Support

Software Licensing

Quality & Reliability

Design Services

Secure Supply Chain

Training

Discontinued Products

Legacy Products

Partner Program

Partner Type

Sales Locator

Sales Locator

Sales Locator

Lattice Products

Discontinued Products

About Lattice

Investor Relations

Newsroom

Careers

License Clickthrough Agreement

会社情報

購入する

サポート

FOLLOW