Lattice Blog

Share:

[Blog] Lattice in Space: Proven Flight Heritage

Lattice in space: Proven Heritage flight
Posted 11/16/2026 by Jim Tavacoli, AVP, Aerospace & Defense Business, Lattice Semiconductor

Posted in

Space programs now run on commercial timelines and budgets. Launch costs have fallen, constellations have replaced single satellites, and commercial companies now build landers, communication terminals, and Earth observation payloads must meet radiation, power, and schedule constraints at the same time. Every watt, gram, and square millimeter on a board is contested, and design cycles are measured in months rather than decades.

 

Low power, small footprint, and space grade programmable logic that lets a team change course with in-orbit reconfiguration without a new chip are what space teams ask for. Since 2021, more than 100,000 Lattice FPGAs have flown on more than 30 missions, and customers such as TESAT have taken them through their own flight qualification.

 

Lattice FPGA Flight Heritage by the Numbers

Lattice’s strong space-grade portfolio spans three generations of Lattice products that are found in Low Earth Orbit (LEO) and Geostationary Earth Orbit (GEO) and beyond as summarized below. 

 

Metric

Figure

Missions flown, 2021 to 2026

30+

Units deployed to space

100,000+

Product generations on orbit

3

Orbits served

Low Earth Orbit (LEO) to Geostationary Earth Orbit (GEO)

 

These are not qualification lots or engineering samples. They are production devices operating in orbit in communication terminals, flight computers, payload controllers, and bus electronics. Several have now logged multiple years of continuous operation, which is the reliability space customers ask us for and the heritage that is hardest to earn.

 

Tens of thousands of units also say something about how space is being built today. Constellations need the same component, radiation tolerant, in volume, at commercial cost, with a stable supply over the life of the program. Lattice has supported high-volume, long lifecycle programs in Industrial and avionics and critical infrastructure markets for decades, and space teams have been applying the same expectations to their constellations.

 

Why Low Power Programmable Logic Belongs in Space

Spacecraft designers face three constraints at once: radiation, power, and change. Lattice FPGAs address each one.

  • Radiation: The Lattice Nexus™ FPGA platform is built on 28 nm fully depleted silicon-on-insulator (FD-SOI) process technology. The thin insulating layer beneath each transistor limits the charge a particle strike can collect, which gives the devices inherent radiation resilience and immunity to single event latch-up. Space teams can start from a commercial device whose radiation behavior has held up in orbit, and Lattice has established an open consortium made of academia, government agencies and commercial developers to openly provide independently developed radiation characterization data to  developers worldwide so they can evaluate it against their own mission requirements.

  • Power: Lattice Nexus-based FPGA devices draw a fraction of the static power of comparable FPGAs in their class. On a satellite, power is mass: every watt saved is a smaller solar array, a smaller battery, and a smaller thermal problem. For a terminal or payload that must run continuously for years without maintenance, low static power also means lower junction temperature and longer life.

  • Flexibility: Space systems outlive their requirements. Programmable logic lets developers fully or partially reprogram  timing, control, and signal processing functions in-orbit to deploy new algorithms as a mission evolves, and scale one space qualified device from LEO to GEO and beyond across platforms. The same design flow in Lattice Radiant® software serves a prototype on the bench and a flight unit in orbit.

 

Together, these properties enable a small team to build a flight-capable system from commercial parts, qualify it on a commercial schedule, and keep it in production for the life of a constellation.

 

Proven in Flight: TESAT and more to come.

  • TESAT, an Airbus subsidiary, has flown optical communication terminals across GEO and LEO missions for more than a decade and supplies terminals for broadband constellations and institutional programs. Its terminals close bidirectional laser links at data rates up to 10 Gbps, with control, timing, and signal processing functions implemented in Lattice FPGAs. TESAT selected Nexus-based FPGAs during a redesign of its terminal electronics, when radiation tolerance, power, and board footprint drove component choices. The devices have now completed multi years of in-orbit operation and have consistently performed within specification since launch. In the recent announcement, TESAT described evaluating the devices against its own requirements for radiation behavior, power, and long-duration reliability. Read the full release

 

Over 30 missions in the last 5 years have chosen Lattice FPGAs on the strength of their inherent radiation resilience and flight results.

 

Three Generations in Orbit

The 100,000 units of Lattice FPGA-based spacecrafts in orbit leverage three generations of Lattice FPGAs, and each generation delivers unique value to its application.

 

FPGA Family

Devices

Typical role in space systems

Lattice Mach™

Lattice MachXO3™, Lattice MachXO4™

Board management, power sequencing, glue logic, and configuration control on bus and payload electronics

Lattice Nexus™

Lattice Certus™-NX, Lattice CertusPro™-NX

Sensor interfaces, latchup detection, supervisory and management as in the TESAT use case and low power control

Lattice Avant™

Lattice Avant™-X

Power efficient computing, payload processing, and storage and signal processing

 

The progression matters. Early customer designs used Lattice FPGAs for the small, essential functions around a radiation tolerant xPU. With the capabilities delivered in Lattice Avant FPGA customers began placing FPGAs into the datapath. Its built-in mitigation, hardened, triplicated control blocks control blocks allows a commercial device to take on roles once reserved for space-grade parts, enabling lower total system power and cost. 

 

What has stayed constant across all three generations is the engagement model. Customers get the same Lattice Radiant® design software, the same support organization, and the same long-term supply commitment they rely on in automotive, critical infrastructure and compute  programs. 

 

What Comes Next

Space is becoming an extension of the Edge: distributed systems that sense, process, and communicate with limited power and no option for a service call. That is the environment Lattice FPGAs were designed for. Thirty missions and 100,000+ units later, the space heritage is on record. It was built by the customers who designed, qualified, and flew these systems, with Lattice as their trusted partner. 

 

If you are designing for orbit and want radiation data, flight references, or a conversation with our Aerospace and Defense team, reach out to our team today.

 

 

Share: