Search the Lattice Website

Share This Result >

Narrow Your Results

Categories
Product Family
Document Type
Clear All
  • 5V & 3.3V Hot Swap Controller

    Reference Design

    5V & 3.3V Hot Swap Controller

    Implements a hot swap controller design within a Power Manager II mixed-signal PLD
  • MAS LIFCL Evaluation Board

    Board

    MAS LIFCL Evaluation Board

    This modular, flexible and easy-to-use CrossLink-NX 17 board is designed for video applications, including CSI2 MIPI, LVDS HDMI (through PMOD).
  • 5V and 3.3V Hot Swap Controller - Documentation

    Document

    5V and 3.3V Hot Swap Controller - Documentation

    Reference Design RD1057 1.0 PDF 185.3KB
  • DESIGN POWR1014-2; 5V AND 3.3V HOT-SWAP CONTROLLER

    Document

  • [IBIS] ORCA Series 3L 5V tolerant

    Document

    [IBIS] ORCA Series 3L 5V tolerant

    IBIS Model ZIP 41.6KB
  • [IBIS] ORCA Series 3T 5V tolerant

    Document

    [IBIS] ORCA Series 3T 5V tolerant

    IBIS Model ZIP 66.4KB
  • [IBIS] ORCA Series 2T 5V tolerant

    Document

    [IBIS] ORCA Series 2T 5V tolerant

    IBIS Model ZIP 51.0KB
  • Model 300 Desktop Programmer

    Webpage

    Model 300 Desktop Programmer

    Used for low-volume, manual programming of loose devices “off board”. Supports all non-volatile Lattice products except iCE. Requires a socket adapter that matches the device/package combination you wish to program.
  • Why is there a limit on the number of 5V tolerant IOs in the ispMACH 4000 devices?

    FAQ

    Why is there a limit on the number of 5V tolerant IOs in the ispMACH 4000 devices?

    Background: As the industry moves towards lower power and smaller process technologies, system and devices voltages go down. Several families of Lattice devices (such as the ispMACH 4000C/B/V and ispMACH 4000ZE) support 5V tolerant IOs to be backward compatible with the existing systems. For these…
  • ORCA Series 3 FPGA

    Webpage

    ORCA Series 3 FPGA

    This is a mature and discontinued device. View documentation and downloads available for this product.
  • AK-MACHXO2-7000 Development Board

    Board

    AK-MACHXO2-7000 Development Board

    Low-cost development platform featuring the MachXO2-7000 FPGA, Ethernet, SDRAM, microSD, serial flash, UART, VGA output and an embedded JTAG programmer
  • 5V and 3.3V Hot Swap Controller - Source Code

    Document

    5V and 3.3V Hot Swap Controller - Source Code

    Reference Design RD1057 1.0 ZIP 135.0KB
  • [ispMACH 4000]: I have 75 5V inputs to an ispMACH 4000 device. Which I/O type should I use between LVTTL or LVTTL_5V?

    FAQ

    [ispMACH 4000]: I have 75 5V inputs to an ispMACH 4000 device. Which I/O type should I use between LVTTL or LVTTL_5V?

    Description:Two 5V support options, \u201CPCI_5V\u201D and \u201CLVTTL_5V\u201D were added to the supporting I/O type constraint list for the ispMACH\u2122 4000 device families. Since the LVTTL I/O type's maximum VIH is 3.6V, you must use the LVTTL_5V I/O type to support 5V inputs.  You can assign…
  • Platform Manager 2: Is there a low cost way to power the ProcessorPM-POWR605 off of a 5V rail? 

    FAQ

    Platform Manager 2: Is there a low cost way to power the ProcessorPM-POWR605 off of a 5V rail? 

    Depending on the nature of the 5V rail, the ProcessorPM-POWR605 can be powered using a simple voltage divider. This very low cost solution uses a stable 5V supply with an attenuator circuit. The 3.3V rail is developed from a voltage divider using 120 ohm and 330 ohm resistors. This low impedance…
  • What is the max current that can be sourced from the 5V Out pin on the HW-USBN-2B programming cable?

    FAQ

    What is the max current that can be sourced from the 5V Out pin on the HW-USBN-2B programming cable?

    The "5V Out" pin is directly connected to the USB's 5V supply. You can determine the maximum current by checking the USB port specifications. This is typically around 500mA on USB 2.0 ports. It could be higher or lower depending on the manufacturer.
  • ORCA Series 2 FPGA

    Webpage

    ORCA Series 2 FPGA

    This is a mature and discontinued device. View documentation and downloads available for this product.
  • Platform Manager 2 Development Kit

    Board

    Platform Manager 2 Development Kit

    Support Discontinued - For Reference Only
    • Page 1 of 1
    First Previous
    1
    		Next Last

    ABOUT LATTICE

    SALES

    SUPPORT

    FOLLOW