LatticeECP3

Efficiency and innovation, squeezed into one tiny, affordable package

Ultra efficient performance – Enabling that last piece of functionality in the smallest possible space is critical. That’s why you need the LatticeECP3’s 150 k LUTs

Maximize reliability, minimize cost and power – With SERDES on-chip and power consumption starting below 0.5 W, LatticeECP3 FPGAs let you improve reliability and lower the cost of industrial, telecom or automotive infrastructure equipment

A well-connected FPGA – SERDES with the right protocols. IOs with the right interfaces. Meet all of your system connectivity and expansion needs with LatticeECP3

Features

  • Up to 16 channels at 3.125 Gbps
  • 800 MBps DDR3, 1Gbps LVDS
  • Up to 586 programmable sysIO buffers with support for PCI Express, Ethernet (GbE, XAUI, & SGMII), HDMI, SMPTE, Serial Rapid I/O, CPRI and JESD204A/B and more
  • Up to 150 k LUTs and 6.8 Mbits of SRAM
  • Wide array of packages as small as 10.0 mm x 10.0 mm with power consumption below 0.5 W

Family Table

LatticeECP3 Device Selection Guide

Parameters ECP3-17 ECP3-35 ECP3-70 ECP3-95 ECP3-150
LUTs (K) 17 33 67 92 149
EBR SRAM Blocks 38 72 240 240 372
EBR SRAM (Kbits) 700 1327 4420 4420 6850
Distributed RAM (Kbits) 36 68 145 188 303
18 x 18 Multipliers 24 64 128 128 320
3.2 Gbps SERDES Channels 4 4 12 12 16
PLLs + DLLs 2+2 4+2 10+2 10+2 10+2
DDR Support DDR3 800, DDR2 533, DDR 400
Boot Flash External External External External External
Dual Boot Yes Yes Yes Yes Yes
Bit-stream Encryption Yes Yes Yes Yes Yes
Core Vcc 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Temp C Yes Yes Yes Yes Yes
Temp I Yes Yes Yes Yes Yes
Temp AEC-Q100 Yes Yes - - -
0.5 mm Spacing I/O Count / SERDES
  ECP3-17 ECP3-35 ECP3-70 ECP3-95 ECP3-150
328-ball csBGA (10 x 10 mm) 116 / 2
1.0 mm Spacing I/O Count / SERDES
  ECP3-17 ECP3-35 ECP3-70 ECP3-95 ECP3-150
256-ball ftBGA (17 x 17 mm) 133 / 4 133 / 4
484-ball fpBGA (23 x 23 mm) 222 / 4 295 / 4 295 / 4 295 / 4
672-ball fpBGA (27 x 27 mm) 310 / 4 380 / 8 380 / 8 380 / 8
1156-ball fpBGA (35 x 35 mm) 490 / 12 490 / 12 586 / 16

Lattice Automotive (AEC-Q100 qualified) LatticeECP3 Device Selection Guide

Parameters LA-ECP3-17 LA-ECP3-35
LUTs (K) 17 33
EBR SRAM (Kbits) 700 1327
EBR SRAM Blocks 38 72
Distributed RAM (Kbits) 36 68
18 x 18 Multipliers 24 64
3.2 Gbps SERDES Channels 4 4
Maximum Available I/O 222 310
PLLs + DLLs 2+2 4+2
0.5 mm Spacing I/O Count / SERDES
  LA-ECP3-17 LA-ECP3-35
328-ball csBGA (10 x 10 mm) 116 / 2
1.0 mm Spacing I/O Count / SERDES
  LA-ECP3-17 LA-ECP3-35
256-ball ftBGA (17 x 17 mm) 133 / 4 133 / 4
484-ball fpBGA (23 x 23 mm) 222 / 4 295 / 4
672-ball fpBGA (27 x 27 mm) 310 / 4

Solutions

With plenty of key building blocks readily available for use in your design, your LatticeECP3 is more than full featured – it’s fully loaded. To help you design as efficiently as possible, Lattice has focused on developing solutions for a wide range of application areas including those described below.

Solve Connectivity Problems at the Network Edge

  • Build low cost bridges between Ethernet and custom or legacy interfaces
  • Quickly bridge ASSPs to protocols common in wireless base stations including CPRI and JESD204
  • Implement network traffic pre-processing that improves performance by off-loading processors
  • Enhance ASSPs used in pico and femto-cells by offloading DSP functions

Implement High Performance Control Plane Solutions For Communications, Industrial, Medical and other Applications

  • Use serial interfaces to provide high performance interfaces with the rest of the system
  • Off-load the control processor by building optimized pre-processing algorithms

Enhance Image/Video Systems With Lightning Fast, Massively Parallel Implementations

  • Use industry leading functions to improve image quality
  • Quickly solve real world problems with proven video analytics
  • Provide interfaces to common video protocols

Build Innovative Automotive Solutions

  • Implement low-cost serial interfaces to transmit image data throughout the automobile
  • Use hardware implementations to efficiently analyze image data
  • Reduce processor workload by offloading display scaling, rotation and combination

Design Resources

Intellectual Property & Reference Designs

Simplify your design efforts by using pre-tested, reusable functions

Application Notes

Learn how to get the most from our line-up of FPGAs / development boards

Software

Complete Design Flows, High Ease of Use

Development Kits & Boards

Our development boards & kits help streamline your design process

Programming Hardware

Take the strain out of in-system programming & in-circuit reconfiguration with our programming hardware

Documentation

To subscribe, or modify your subscription, to Document Notifications please login to your Lattice account

Quick Reference Technical Resources Information Resources Downloads
TITLE NUMBER VERSION DATE FORMAT SIZE
Advanced Security Encryption Key Programming Guide
TN1215 1.5 1/30/2016 PDF 4.7 MB
Dual and Mulitple Boot Feature
TN1216 1.6 10/30/2015 PDF 3.9 MB
Electrical Recommendations for Lattice SERDES
TN1114 2.9 3/25/2014 PDF 1.8 MB
LatticeECP3 and LatticeECP2M High-Speed Backplane Measurements
TN1149 1.5 10/7/2013 PDF 3.8 MB
LatticeECP3 Hardware Checklist
TN1189 2.1 2/13/2012 PDF 530.6 KB
LatticeECP3 High-Speed I/O Interface
TN1180 2.3 4/2/2013 PDF 12.3 MB
LatticeECP3 Memory Usage Guide
TN1179 1.8 4/1/2014 PDF 4.6 MB
LatticeECP3 Power Consumption and Management
TN1181 1.1 2/2/2012 PDF 424.1 KB
LatticeECP3 SERDES/PCS Usage Guide
TN1176 2.8 8/26/2014 PDF 8.6 MB
LatticeECP3 Slave SPI Port User's Guide
TN1222 1.7 4/25/2014 PDF 1.9 MB
LatticeECP3 sysCLOCK PLL/DLL Design and Usage Guide
TN1178 2.6 2/3/2014 PDF 5.1 MB
LatticeECP3 sysCONFIG Usage Guide
TN1169 3.1 6/1/2015 PDF 4 MB
LatticeECP3 sysDSP Usage Guide
TN1182 1.3 2/13/2012 PDF 5.5 MB
LatticeECP3 sysIO Usage Guide
TN1177 2.2 8/19/2013 PDF 2 MB
Minimizing System Interruption During Configuration Using TransFR Technology
TN1087 3.7 10/30/2015 PDF 2.4 MB
Soft Error Detection SED Usage Guide
TN1184 1.7 11/30/2015 PDF 1.4 MB
Sub-LVDS Signaling Using Lattice Devices
TN1210 1.5 11/30/2015 PDF 760.8 KB
LatticeECP3 EA Family Data Sheet
Note: EA devices only.
DS1021 2.8EA 3/24/2015 PDF 10.4 MB
ECP3 migration 17to35_256
1.2 4/6/2012 XLS 68 KB
ECP3 migration 17to35_484
1.2 4/6/2012 XLS 62 KB
ECP3 migration 17to70_484
1.2 4/6/2012 XLS 67 KB
ECP3 migration 17to95_484
1.2 4/6/2012 XLS 67 KB
ECP3 migration 35to150_672
1.1 7/9/2009 XLS 87.5 KB
ECP3 migration 35to70_484
1.2 9/10/2012 XLS 85.5 KB
ECP3 migration 35to70_672
1.2 9/10/2012 XLS 96 KB
ECP3 migration 35to95_484
1.2 9/10/2012 XLS 86 KB
ECP3 migration 35to95_672
1.2 9/10/2012 XLS 96.5 KB
ECP3 migration 70to150_1156
1.2 9/10/2012 XLS 127.5 KB
ECP3 migration 70to150_672
1.2 9/10/2012 XLS 97.5 KB
ECP3 migration 70to95_1156
1.1 7/9/2009 XLS 14.5 KB
ECP3 migration 70to95_484
1.1 7/9/2009 XLS 14.5 KB
ECP3 migration 70to95_672
1.1 7/9/2009 XLS 15 KB
ECP3 migration 95to150_1156
1.2 9/10/2012 XLS 127.5 KB
ECP3 migration 95to150_672
1.2 9/10/2012 XLS 97.5 KB
LatticeECP3-150EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.5 4/15/2010 CSV 43.8 KB
LatticeECP3-17EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.6 1/24/2012 CSV 23.9 KB
LatticeECP3-35EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.4 4/15/2010 CSV 29 KB
LatticeECP3-70E Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.2 7/13/2009 CSV 49.8 KB
LatticeECP3-70EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.3 4/15/2010 CSV 49.1 KB
LatticeECP3-95E Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.2 7/9/2009 CSV 49.8 KB
LatticeECP3-95EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.2 4/15/2010 CSV 49 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
LA-LatticeECP3 Automotive Family Data Sheet
1.1 5/8/2014 PDF 9.5 MB
LatticeECP3 EA Family Data Sheet
Note: EA devices only.
DS1021 2.8EA 3/24/2015 PDF 10.4 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
Electrical Recommendations for Lattice SERDES (Chinese Language Version)
TN1114C 02.8 10/12/2012 PDF 2 MB
High-Speed PCB Design Considerations
TN1033 06.1 5/2/2011 PDF 795.1 KB
High-Speed PCB Design Considerations (Chinese Language Version)
TN1033C 06.1 5/23/2011 PDF 434.6 KB
LatticeECP3 and Broadcom 1 GbE (1000BASE-X) Physical/MAC Layer Interoperability
TN1217 1.0 7/26/2010 PDF 1.5 MB
LatticeECP3 and Broadcom 10 Gbps Physical/MAC Layer Interoperability
TN1218 1.1 2/13/2012 PDF 3.5 MB
LatticeECP3 and Marvell 10 Gbps Physical/MAC Layer Interoperability
TN1219 1.0 7/26/2010 PDF 1.4 MB
LatticeECP3 Marvell 1 GbE (1000BASE-X) Physical/MAC Layer Interoperability
TN1196 1.1 2/13/2012 PDF 2.9 MB
LatticeECP3 Marvell SGMII Physical/MAC Layer Interoperability
TN1197 1.1 2/13/2012 PDF 3 MB
LatticeECP3 Marvell XAUI 10 Gbps Physical Layer Interoperability
TN1194 1.1 2/13/2012 PDF 2.7 MB
LatticeECP3 SERDES/PCS Reset Sequence - Source Code
For use with Technical Note - TN1176
TN1176 1.1 2/4/2010 ZIP 5.6 KB
LatticeECP3 SERDES/PCS Usage Guide (Chinese Language Version)
TN1176C 02.4 8/28/2012 PDF 8.7 MB
LatticeECP3 SERDES/PCS Usage Guide (Japanese Language Version)
TN1176J 2.4 8/22/2012 PDF 2.7 MB
LatticeECP3 sysIO Usage Guide (Chinese Language Version)
TN1177C 02.0 6/26/2012 PDF 3.1 MB
Low-Cost Serial RapidIO to TI 6482 Digital Signal Processor Interoperability with LatticeECP3
TN1214 1.1 10/18/2010 PDF 176.4 KB
Parallel Flash Programming and FPGA Configuration
Also download the implementation files for AN8077.
AN8077 1.3 3/1/2015 PDF 2.4 MB
Parallel Flash Programming and FPGA Configuration - Source Code
For use with Application Note - AN8077
AN8077 1.3 1/4/2013 RAR 1.4 MB
Solder Reflow Guide for Surface Mount Devices
TN1076 3.5 6/1/2015 PDF 488.6 KB
Transmission of High-Speed Serial Signals over Common Cable Media
TN1066 01.8 2/13/2012 PDF 840.1 KB
Advanced Security Encryption Key Programming Guide
TN1215 1.5 1/30/2016 PDF 4.7 MB
Dual and Mulitple Boot Feature
TN1216 1.6 10/30/2015 PDF 3.9 MB
Electrical Recommendations for Lattice SERDES
TN1114 2.9 3/25/2014 PDF 1.8 MB
LatticeECP3 and LatticeECP2M High-Speed Backplane Measurements
TN1149 1.5 10/7/2013 PDF 3.8 MB
LatticeECP3 Hardware Checklist
TN1189 2.1 2/13/2012 PDF 530.6 KB
LatticeECP3 High-Speed I/O Interface
TN1180 2.3 4/2/2013 PDF 12.3 MB
LatticeECP3 Memory Usage Guide
TN1179 1.8 4/1/2014 PDF 4.6 MB
LatticeECP3 Power Consumption and Management
TN1181 1.1 2/2/2012 PDF 424.1 KB
LatticeECP3 SERDES/PCS Usage Guide
TN1176 2.8 8/26/2014 PDF 8.6 MB
LatticeECP3 Slave SPI Port User's Guide
TN1222 1.7 4/25/2014 PDF 1.9 MB
LatticeECP3 sysCLOCK PLL/DLL Design and Usage Guide
TN1178 2.6 2/3/2014 PDF 5.1 MB
LatticeECP3 sysCONFIG Usage Guide
TN1169 3.1 6/1/2015 PDF 4 MB
LatticeECP3 sysDSP Usage Guide
TN1182 1.3 2/13/2012 PDF 5.5 MB
LatticeECP3 sysIO Usage Guide
TN1177 2.2 8/19/2013 PDF 2 MB
Minimizing System Interruption During Configuration Using TransFR Technology
TN1087 3.7 10/30/2015 PDF 2.4 MB
Soft Error Detection SED Usage Guide
TN1184 1.7 11/30/2015 PDF 1.4 MB
Sub-LVDS Signaling Using Lattice Devices
TN1210 1.5 11/30/2015 PDF 760.8 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
ECP3 migration 17to35_256
1.2 4/6/2012 XLS 68 KB
ECP3 migration 17to35_484
1.2 4/6/2012 XLS 62 KB
ECP3 migration 17to70_484
1.2 4/6/2012 XLS 67 KB
ECP3 migration 17to95_484
1.2 4/6/2012 XLS 67 KB
ECP3 migration 35to150_672
1.1 7/9/2009 XLS 87.5 KB
ECP3 migration 35to70_484
1.2 9/10/2012 XLS 85.5 KB
ECP3 migration 35to70_672
1.2 9/10/2012 XLS 96 KB
ECP3 migration 35to95_484
1.2 9/10/2012 XLS 86 KB
ECP3 migration 35to95_672
1.2 9/10/2012 XLS 96.5 KB
ECP3 migration 70to150_1156
1.2 9/10/2012 XLS 127.5 KB
ECP3 migration 70to150_672
1.2 9/10/2012 XLS 97.5 KB
ECP3 migration 70to95_1156
1.1 7/9/2009 XLS 14.5 KB
ECP3 migration 70to95_484
1.1 7/9/2009 XLS 14.5 KB
ECP3 migration 70to95_672
1.1 7/9/2009 XLS 15 KB
ECP3 migration 95to150_1156
1.2 9/10/2012 XLS 127.5 KB
ECP3 migration 95to150_672
1.2 9/10/2012 XLS 97.5 KB
LatticeECP3-150EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.5 4/15/2010 CSV 43.8 KB
LatticeECP3-17EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.6 1/24/2012 CSV 23.9 KB
LatticeECP3-35EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.4 4/15/2010 CSV 29 KB
LatticeECP3-70E Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.2 7/13/2009 CSV 49.8 KB
LatticeECP3-70EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.3 4/15/2010 CSV 49.1 KB
LatticeECP3-95E Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.2 7/9/2009 CSV 49.8 KB
LatticeECP3-95EA Pinout
Note: a pin out file can be exported from Diamond version 1.3 or above.
1.2 4/15/2010 CSV 49 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
DDR2 Demo for the LatticeECP3 Serial Protocol Board
Describes the DDR2 Demo for use with the LatticeECP3 Serial Protocol Board.
UG49 5/22/2013 PDF 346 KB
JESD207 IP Core User's Guide
IPUG111 1.0 8/27/2013 PDF 2.4 MB
LatticeECP3 AMC Evaluation Board User's Guide
EB56 01.1 8/27/2012 PDF 6.6 MB
LatticeECP3 AMC Serial RapidIO 2.1 Demo User's Guide
UG39 01.0 11/17/2010 PDF 2.7 MB
LatticeECP3 CPRI Demo Design User's Guide
UG26 01.2 5/3/2012 PDF 2.7 MB
LatticeECP3 DDR3 Demo for the LatticeECP3 I/O Protocol Board User's Guide
UG38 01.4 6/8/2012 PDF 2.7 MB
LatticeECP3 Eye/Backplane Demo for the LatticeECP3 Serial I/O Protocol Board User's Guide
UG24 01.4 3/4/2011 PDF 849.9 KB
LatticeECP3 PCI Express Root Complex Lite x1 Native Demo
UG40 1.0 10/29/2010 PDF 263.2 KB
LatticeECP3 Serial Protocol Board - Revision D User's Guide
EB44 1.3 7/8/2010 PDF 2.4 MB
LatticeECP3 Video Protocol Board - Revision B User's Guide
EB39 1.3 3/2/2010 PDF 2.5 MB
LatticeECP3 XAUI Demo
UG23 01.3 6/16/2011 PDF 1.1 MB
PCI IP Core User's Guide
PCI Core User Guide for LatticeSC, LatticeECP3, LatticeECP2/M, LatticeECP/EC, LatticeXP, Mach XO, and MachXO2
IPUG18 9.2 11/8/2010 PDF 4.6 MB
PCIe Sample Demo Debugging and Packet Analysis Guide
TN1271 10/13/2013 PDF 3.7 MB
RapidIO 2.x LP-Serial Physical Layer Endpoint IP Core User's Guide
IPUG84 01.3 6/28/2011 PDF 2.4 MB
Tri-Rate SDI PHY IP Loopback and Passthrough Sample Designs
UG22 1.1 10/30/2009 PDF 222.2 KB
Tri-Rate SMPTE SDI Demo
UG21 01.5 12/21/2011 PDF 1.1 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
MDIO (Management Data Input/Output Interface) Peripheral - WISHBONE Compatible
RD1074 1.1 4/1/2011 PDF 369 KB
MIPI CSI-2-to-CMOS Parallel Sensor Bridge
RD1146 1.4 1/11/2015 ZIP 4.4 MB
MIPI CSI2-to-CMOS Parallel Sensor Bridge - Documentation
RD1146 1.3 4/1/2014 PDF 4.2 MB
Parallel to MIPI CSI-2 TX Bridge - Documentation
RD1183 1.5 1/1/2015 PDF 1.3 MB
Parallel to MIPI CSI-2 TX Bridge - Source Code
RD1183 1.5 1/1/2015 ZIP 1.2 MB
Parallel to MIPI DSI TX Bridge - Documentation
RD1184 1.5 1/1/2015 PDF 1.6 MB
Parallel to MIPI DSI TX Bridge - Source Code
RD1184 1.5 1/1/2015 ZIP 2.6 MB
PCI Target 32-bit/33MHz
RD1008 3.5 8/19/2013 PDF 1.5 MB
PCI/WISHBONE Bridge
RD1045 1.3 4/10/2011 PDF 244 KB
RGMII to GMII Bridge - Source Code
RD1022 2.3 11/18/2016 ZIP 478 KB
RGMII to GMII Bridge Reference Design
Also download the source code below
RD1022 2.3 11/18/2016 PDF 279.7 KB
WISHBONE UART - Documentation
RD1042 1.6 12/1/2014 PDF 1.4 MB
WISHBONE UART - Source Code
RD1042 1.6 12/1/2014 ZIP 58.5 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
ACN03D-11 Withdrawal of ACN03C-11
ANC03D-11 1 4/1/2011 PDF 796.6 KB
Courtesy Notification of Additional Ejector Pin Sites on Select BGA Packages
5/22/2013 PDF 252.9 KB
PCN 02A-16 ECP5/ECP5-5G updates on Diamond v3.7
PCN02A-16 1.0 3/1/2016 PDF 162.6 KB
PCN 03B13 Alternate Qualified Assembly Test Site Alternate Qualified Material Sets ASE Taiwan
PCN03B 1.0 11/14/2014 PDF 229.6 KB
PCN 09A-12 Affected Devices
PCN09A-12 1.0 5/14/2012 XLSX 121 KB
PCN 09A-12 Alternate Qualified Material Set, Assembly Site for Select Lattice Families
PCN09A-12 1.0 5/14/2012 PDF 160.2 KB
PCN 09A-12 Customer Characterization Report
PCN09A-12 1.0 5/14/2012 PDF 551.7 KB
PCN 09A-12 Frequently Asked Questions
PCN09A-12 1.0 5/11/2012 PDF 178.9 KB
PCN 09A-12 Material Set Changes
PCN09A-12 1.0 5/14/2012 XLSX 121 KB
PCN03A-13 Alternate Qualified Assembly and Material Sets for Select Devices
PCN03A-13 6/28/2013 PDF 202.5 KB
PCN03A-13 Device Characterization Report
PCN03A-13 6/28/2013 PDF 981.3 KB
PCN03A-13 FAQs
PCN03A-13 6/28/2013 PDF 458.3 KB
PCN03A-14 Affected Part Number List
PCN03A-14 1.0 4/4/2014 XLSX 60 KB
PCN03A-14 Characterization Report
PCN03A-14 1.0 4/4/2014 PDF 919.5 KB
PCN03A-14 FAQ
PCN03A-14 1.0 4/4/2014 PDF 452.5 KB
PCN03A-14 Material Set Table
PCN03A-14 1.0 4/4/2014 XLSX 26.9 KB
PCN03B-13 Affected Part Number and Material Sets
PCN03B-13 6/28/2013 XLSX 69 KB
PCN03B-14 Notification of Intent to Utilize an Alternate Qualified Assembly Site/Test Site and/or Alternate Qualified Material Sets for Select Lattice Products
PCN03B-14 1.0 11/21/2014 PDF 229.9 KB
PCN05A-11 Notification of Intent to Utilize an Alternate Foundry Process for LatticeECP3
PCN05A-11 1.0 4/11/2011 PDF 207.6 KB
PCN06A-14 Affected Device List
PCN06A-14 1.0 10/3/2014 XLSX 45.1 KB
PCN06A-14 Characterization Report
PCN06A-14 1.0 10/3/2014 PDF 563.7 KB
PCN06A-14 Material Set Table
PCN06A-14 1.0 10/3/2014 XLSX 13.7 KB
PCN06B-14 Notification of Intent to Utilize an Alternate Qualified Assembly Site/Test Site and Alternate Qualified Material Sets for Select Lattice Products
PCN06B-14 1.0 11/21/2014 PDF 229.5 KB
PCN07C-11 Withdrawal of PCN07B-11
PCN07C-11 1.0 8/1/2011 PDF 917.9 KB
PCN08A13_AffectedDevices
PCN08A-13 1 9/26/2013 XLSX 78.2 KB
PCN10A-11 Notification of Intent to Freeze ispLEVER After Version 8.2
PCN10A-11 1.0 7/25/2011 PDF 52.7 KB
PCN11A-10 Notification of Change of Ordering Part Number for the LFE3-70E and LFE3-95E to the LFE3-70EA and LFE3-95EA, Respectively
PCN11A-10 1 7/9/2010 PDF 59 KB
PCN11A-10 Notification of Change of Ordering Part Number for the LFE3-70E and LFE3-95E to the LFE3-70EA and LFE3-95EA, Respectively - Japanese Language
PCN11A-10 1 7/9/2010 PDF 144.1 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
Lattice OrCAD Capture Schematic Library (OLB)
This file contains a OrCAD Capture Schematic Library (OLB file type) for all Lattice products. This .zip file also includes a .xls worksheet with a list of the contents of the OLB. These symbols can be used to help with OrCAD schematic designs.
5.6 11/16/2016 ZIP 1.1 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
ECP3 Automotive Product Brochure
7/2/2013 PDF 2.5 MB
Ethernet Solutions Brochure
I0194 12/16/2009 PDF 2 MB
IP Suites for LatticeECP3 - News Brief
NB101 2/4/2011 PDF 458.8 KB
Lattice HetNet Solutions Brochure
1.0 11/12/2013 PDF 2.2 MB
LatticeECP3 Family Product Brochure
I0198 H 5/29/2012 PDF 2.7 MB
LatticeECP3 Product Brief (Chinese Language Version)
I0198C 5/29/2012 PDF 3.1 MB
LatticeECP3 Versa Development Kit - News Brief
NB103 2.0 7/5/2012 PDF 364.2 KB
LatticeECP3: First PCIe 2.0 Compliant Low Cost FPGA - News Brief
NB104 7/1/2011 PDF 479.5 KB
New LatticeECP3 Devices - News Brief
NB106 1.0 1/23/2012 PDF 343.5 KB
PCI Express Solutions Brochure
I0195 5/14/2010 PDF 1.8 MB
Product Selector Guide
I0211K 5.0 9/13/2016 PDF 11.3 MB
SERCOS III Evaluation Kit Product Brief
I0223 2/24/2012 PDF 772.8 KB
Wireless Solutions Brochure
I0197 8/14/2012 PDF 2 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
LatticeECP3 PCI Express Development Kit Installation Read Me - Linux
3/9/2011 TXT 0.2 KB
LatticeECP3 PCI Express Development Kit Installation Read Me - Windows
3/9/2011 TXT 0.2 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
Designing for Low Power (LatticeECP3)
1.0 3/10/2010 PDF 140.2 KB
Embedded Display Control Using FPGAs (Chinese Language)
1.0 6/28/2010 PDF 1.5 MB
Embedded Signal Processing Capabilities of the LatticeECP3 sysDSP Block
1.0 2/19/2009 PDF 195.9 KB
Embedded Signal Processing Capabilities of the LatticeECP3 sysDSP Block (Chinese Language)
1.0 6/8/2009 PDF 457.9 KB
Expanding Microprocessor Connectivity Using Low-cost FPGAs
1.0 8/28/2013 PDF 474.4 KB
FPGAs in Next Generation Wireless Networks (Chinese Language)
5/22/2013 PDF 3.5 MB
FPGAs in Next Generation Wireless Networks (Japanese Language)
1.0 3/10/2010 PDF 284.1 KB
FPGAs in Next Generation Wireless Networks (Korean Language)
5/22/2013 PDF 3.9 MB
FPGAs in Next Generation Wireless Networks (LatticeECP3)
1.0 3/10/2010 PDF 174.7 KB
FPGAs in Next Generation Wireless Networks (Traditional Chinese Language)
1.0 5/22/2013 PDF 1.5 MB
Gen2 Serial RapidIO and Low Cost Low Power FPGAs (Korean Language)
1.0 9/26/2011 PDF 349 KB
GEN2 Serial RapidIO and Low Cost, Low Power FPGAs
1.0 8/4/2011 PDF 276 KB
GEN2 Serial RapidIO and Low Cost, Low Power FPGAs - Chinese Language
1.0 5/22/2013 220.2 KB
High-Speed SERDES Interfaces In High Value FPGAs (LatticeECP3)
1.0 2/19/2009 PDF 503 KB
Implementing DDR3 Memory Controller (LatticeECP3)
1.0 3/10/2010 PDF 147.9 KB
Implementing PCI Express Bridging Solutions in an FPGA
1.0 7/1/2010 PDF 970.1 KB
Implementing PCI Express Bridging Solutions in an FPGA (Chinese Language)
1.0 7/1/2010 PDF 1007.1 KB
Leveraging MIPI D-PHY-based Peripherals in Embedded Designs
1.0 5/1/2014 PDF 567.3 KB
Power Considerations in FPGA Design (Chinese Language)
1.0 6/8/2009 PDF 814.7 KB
Power Considerations in FPGA Design (LatticeECP3)
1.0 2/19/2009 PDF 282.1 KB
Power WP - Design Example Source Code (LatticeECP3)
1.0 2/17/2009 ZIP 1.4 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
[BSDL] LFE3-150EA FPBGA1156
1.01 9/10/2012 BSM 125.8 KB
[BSDL] LFE3-150EA FPBGA672
1.01 9/10/2012 BSM 97.9 KB
[BSDL] LFE3-17EA CSBGA328
1.01 2/14/2014 BSM 41.3 KB
[BSDL] LFE3-17EA FPBGA256
1.02 2/14/2014 BSM 40.8 KB
[BSDL] LFE3-17EA FPBGA484
1.02 2/12/2014 BSM 52.2 KB
[BSDL] LFE3-35EA FPBGA256
1.01 9/10/2012 BSM 47.9 KB
[BSDL] LFE3-35EA FPBGA484
1.02 2/7/2014 BSM 63.6 KB
[BSDL] LFE3-35EA FPBGA672
1.01 9/10/2012 BSM 69.5 KB
[BSDL] LFE3-70E FPBGA1156
1.03 9/10/2012 BSM 110.2 KB
[BSDL] LFE3-70E FPBGA484
1.02 9/10/2012 BSM 77.7 KB
[BSDL] LFE3-70E FPBGA672
1.02 9/10/2012 BSM 89.1 KB
[BSDL] LFE3-70EA FPBGA1156
1.01 9/10/2012 BSM 109.9 KB
[BSDL] LFE3-70EA FPBGA484
1.01 9/10/2012 BSM 77.5 KB
[BSDL] LFE3-70EA FPBGA672
1.01 9/10/2012 BSM 88.9 KB
[BSDL] LFE3-95E FPBGA1156
1.02 9/10/2012 BSM 110.1 KB
[BSDL] LFE3-95E FPBGA484
1.03 9/10/2012 BSM 77.8 KB
[BSDL] LFE3-95E FPBGA672
1.03 9/10/2012 BSM 89.2 KB
[BSDL] LFE3-95EA FPBGA1156
1.01 9/10/2012 BSM 109.9 KB
[BSDL] LFE3-95EA FPBGA484
1.01 9/10/2012 BSM 77.5 KB
[BSDL] LFE3-95EA FPBGA672
1.01 9/10/2012 BSM 88.9 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
ECP3 Device Family DELPHI Models
1.0 3/20/2009 ZIP 247.2 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
[IBIS] Lattice ECP3
2.2 9/10/2012 IBS 64.3 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
LatticeECP3 Versa Kit - SerDes Eye Backplane Demo - Design Files for Linux
Demonstrates the SERDES performance of the LatticeECP3 FPGA at 3.125Gbps using the LatticeECP3 Versa board, along with Lattice software. Installation includes documentation and source files.
01.0 5/22/2013 GZ 2.7 MB
LatticeECP3 Versa Kit - SerDes Eye Backplane Demo - Design Files for Windows
Demonstrates the SERDES performance of the LatticeECP3 FPGA at 3.125Gbps using the LatticeECP3 Versa board, along with Lattice software. Installation includes documentation and source files.
1.0 5/22/2013 EXE 4.8 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
DDR2 Demo for the LatticeECP3 Serial Protocol Board - demo files
Demo source files for the DDR2 Demo, for use with the LatticeECP3 Serial Protocol Board
5/22/2013 ZIP 582.7 KB
ECP3 PCI Express Development Kit Demos (Linux)
5/22/2013 GZ 56.2 MB
ECP3 PCI Express Development Kit Demos (Windows)
5/22/2013 EXE 48.5 MB
LatticeECP3 CPRI Demo Design
2.0 5/3/2012 ZIP 7.2 MB
LatticeECP3 DDR3 Demo
1.4 6/8/2012 ZIP 235.3 KB
LatticeECP3 PCI Express Root Complex Lite x1 Native Demo
1.0 11/1/2010 ZIP 2.7 MB
LatticeECP3 SERDES Eye/Backplane Demo Design
1.1 8/4/2010 ZIP 874.3 KB
LatticeECP3 XAUI Demo
1.3 6/16/2011 ZIP 1.8 MB
Tri-Rate SMPTE SDI Demo
For use with ispLEVER 8.1 SP1
2.0 4/24/2014 ZIP 1.5 MB
Tri-Rate SMPTE SDI Demo
For use with ispLEVER 7.2 SP2
1.0 4/30/2009 ZIP 1.5 MB


Support