Lattice Radiant Design Software Video Series

Radiant-Design-Software-Video-Series

The Lattice Radiant Design Software Video Series is a multi-part video series covering every aspect of FPGA design and implementation using Lattice Radiant Design Software. It is well suited for both experienced users wanting to learn all aspects of the tool or for new users wanting to get started quickly with the tool.

Chapters include:

1. Introduction and Basics

1.1 Installation and Licensing

Radiant Video Series 1.1: Installation and Licensing

Introduction to downloading, licensing, and installing the Lattice Radiant Design Software

Length: 6:00 (Minutes)

1.2 Lattice Radiant Environment

Radiant Video Series 1.2: Project Environment

Introduction to the Radiant workspace for FPGA implementation

Length: 7:50 (Minutes)

1.3 Strategies and Implementations

Radiant Video Series 1.3: Project Strategies and Implementations

How to use Radiant project strategies and project implementations

Length: 13:17 (Minutes)

2. Project Creation and Management

2.1 Creating Projects

Radiant Video Series 2.1: Creating and Opening Projects

How to create new projects and open existing projects

Length: 8:28 (Minutes)

2.2 Managing Project Files

Radiant Video Series 2.2: Managing Project Files

Using the Radiant File List tab for design file management

Length: 7:15 (Minutes)

2.3 IP Catalog

Radiant Video Series 2.3: IP Catalog

Using the IP Catalog in Radiant to download and install soft IP

Length: 8:23 (Minutes)

2.4 Implementing IP

Radiant Video Series 2.4: Implementing IP

How to generate and configure soft IP modules and instantiate in a design

Length: 7:03 (Minutes)

2.5 Using Source Templates

Radiant Video Series 2.5: Using Source Templates

Using the Source Templates provided in Radiant to create a design file

Length: 5:27 (Minutes)

3. Project Simulation

3.1 Simulation Basics

Radiant Video Series 3.1: Simulation Basics

How to set up a simulation for Radiant projects

Length: 4:45 (Minutes)

3.2 ModelSim Environment Introduction

Radiant Video Series 3.2: ModelSim Environment

How to use the ModelSim Lattice Edition software included with Radiant

Length: 4:31 (Minutes)

3.3 Using Simulation Wizard

Radiant Video Series 3.3: Simulation Wizard

How to use the Simulation Wizard to simplify simulation setup

Length: 8:42 (Minutes)

4. Synthesis and Constraints

4.1 Constraint Basics

Radiant Video Series 4.1: Constraint Basics

Introduction to timing constraints in Radiant and the Timing Constraints Editor

Length: 6:24 (Minutes)

4.2 Creating Timing Constraints

Radiant Video Series 4.2: Creating Timing Constraints

How to use the Timing Constraint Editor to create timing constraints for synthesis

Length: 8:34 (Minutes)

4.3 Synthesis

Radiant Video Series 4.3: Synthesis

How to run synthesis using the process toolbar and task detail view

Length: 6:00 (Minutes)

4.4 Radiant Reports

Radiant Video Series 4.4: Design & Timing Reports

Introduction to Radiant reports and understanding how to use them

Length: 5:38 (Minutes)

4.5 Netlist Analyzer

Radiant Video Series 4.5: Netlist Analyzer

Using the Netlist Analyzer to understand design results after synthesis and technology mapping

Length: 5:17 (Minutes)

5. Map and PAR

5.1 Creating Device Constraints

Radiant Video Series 5.1: Creating Design Constraints

Introduction to Radiant Design Constraints and the Design Constraints Editor

Length: 6:34 (Minutes)

5.2 Post Synthesis Timing Constraints

Radiant Video Series 5.2: Post-Synthesis Timing Constraints

How to create timing constraints after synthesis using the Timing Constraints Editor

Length: 6:43 (Minutes)

5.3 Physical Designer

Radiant Video Series 5.3: Physical Designer

Using the Radiant Physical Designer to view and modify the FPGA implementation

Length: 11:55 (Minutes)

5.4 Power Calculator

Radiant Video Series 5.4: Power Calculator

How to use the Radiant Power Calculator for static and dynamic power analysis

Length: 8:44 (Minutes)

5.5 Timing Analyzer

Radiant Video Series 5.5: Timing Analyzer

How to analyze static timing performance of a design using the Radiant Timing Analyzer

Length: 10:18 (Minutes)

5.6 Run Manager

Radiant Video Series 5.6: Run Manager

How to use the Run Manager to launch multiple implementations through the project flow

Length: 8:08 (Minutes)

5.7 ECO Editor

Radiant Video Series 5.7: ECO Editor

Using the Radiant ECO Editor to make changes to an existing FPGA implementation

Length: 5:53 (Minutes)

6. Programming and Debugging

6.1 Programming Basics

Radiant Video Series 6.1: Programming Basics

Introduction to the programming flow for Radiant supported FPGAs

Length: 7:39 (Minutes)

6.2 Device Programming

Radiant Video Series 6.2: Device Programming

Using the Radiant Programmer tool to program an FPGA device

Length: 7:13 (Minutes)

6.3 Reveal Inserter

Radiant Video Series 6.3: Debug: Reveal Inserter

How to add debug cores to an FPGA implementation with Reveal Inserter

Length: 10:33 (Minutes)

6.4 Reveal Analyzer Controller

Radiant Video Series 6.4: Debug: Reveal Analyzer and Controller

How to control and instrument debug probe points in the design with Reveal Controller and Analyzer

Length: 7:24 (Minutes)

ABOUT LATTICE

SALES

SUPPORT

FOLLOW