Follow the three steps below to Download, Install, and License ispLEVER Classic.
STEP 1 - Download
ispLEVER Classic consists of the modules as listed below; The ispLEVER Classic Base Module installation (which includes Synplify Synthesis module and Aldec Active-HDL Lattice Edition for simulation) and the ispLEVER Classic FPGA Module installation.
Use the Downloads tab on this page to download the software installers.
||Device Support / Feature
|ispLEVER Classic 2.0 Base Module:
This includes the ispLEVER Project Navigator, and all the tools and device libraries you need to implement a design for any of the programmable families listed at the right. It also includes the Lattice version of the Synplify™ Pro synthesis tool (I-2014.03LC) from Synopsys® for HDL synthesis as well as the Aldec Active-HDL Lattice Edition II simulator version 9.3.
GAL and ispGAL
|ispLEVER Classic 2.0 FPGA Module:
This optional module adds support for ORCA FPGA and FPSC devices.
Note that the Base Module must be installed prior to the FPGA Module.
STEP 2 - Install each ispLEVER Classic Module
Starting with the ispLEVER Classic Base Module, unzip the downloaded file, then double-click the extracted file and to start the installation procedure. You can also download the installation guide from the Documentation tab on this page and read it for more detailed instructions and options.
STEP 3 - License ispLEVER Classic
ispLEVER Classic requires a valid software license. To obtain a license go to the Licensing tab on this page to request a 1-year term license. License files are supplied by Lattice via email. Save the resulting license.dat file to <install_path>License. Once licensed, ispLEVER Classic is ready to run.</install_path>