莱迪思解决方案

这里有轻松快速实现设计所需的全部资源

Our system is going under maintenance starting May 25, 2024 at 7:00 AM Pacific and ending May 25, 2024 at 1:00 PM Pacific. During this window, the website may not be reachable. For immediate assistance, please contact techsupport@latticesemi.com.
Share This Result >

Narrow Your Results



Solution Type



Device Support





















Tags































Providers

Clear All
  • Lattice Sentry I2C Filter IP Core

    IP Core

    Lattice Sentry I2C Filter IP Core

    Sentry I2C Filter IP Core provides an interface between I2C bus devices and a host processor while protecting against common I2C bus vulnerabilities.
    Lattice Sentry I2C Filter IP Core
  • Lattice Sentry PLD Interface IP Core

    IP Core

    Lattice Sentry PLD Interface IP Core

    Lattice Semiconductor Customer Programmable Logic Devices (PLD)implements a bidirectional mailbox for sending and receiving messages.
    Lattice Sentry PLD Interface IP Core
  • Lattice Sentry SMBus Mailbox IP Core

    IP Core

    Lattice Sentry SMBus Mailbox IP Core

    SMBus, a two-wire interface that support fairness arbitration and compatible with AHB-Lite specification. Target devices are Mach-NX and MachXO3D.
    Lattice Sentry SMBus Mailbox IP Core
  • PIC IP Core

    IP Core

    PIC IP Core

    Lattice Semiconductor PIC soft IP with configurable 1~8 interrupt inputs and 32-bit AHB-L interface for Mach-NX FPGA
    PIC IP Core
  • SFB Interface IP Core

    IP Core

    SFB Interface IP Core

    SFB allow access to AHB-L CPLD block , management CPU recovery circuit and Flash sector for read/write.
    SFB Interface IP Core
  • 基于Mach-NX的莱迪思Sentry演示板

    Board

    基于Mach-NX的莱迪思Sentry演示板

    这一完善的平台能够帮助您开发和测试符合NIST 800-193规范的PFR方案,包括实现调试、接口和拓展的各种特性。
    基于Mach-NX的莱迪思Sentry演示板
  • 莱迪思Sentry MachXO3D可信根演示

    演示

    莱迪思Sentry MachXO3D可信根演示

    完整的位流/固件包可帮助您在采用MachXO3D的莱迪思Sentry演示板上演示和测试符合NIST 800-193规范的PFR解决方案
    莱迪思Sentry MachXO3D可信根演示
  • 莱迪思Sentry MachXO3D演示板

    Board

    莱迪思Sentry MachXO3D演示板

    完善的平台来帮助您开发和测试符合NIST 800-193规范的PFR解决方案。包括众多特性以实现调试、接口和扩展
    莱迪思Sentry MachXO3D演示板
  • 莱迪思Sentry采用MachXO3D的可信根参考设计

    Reference Design

    莱迪思Sentry采用MachXO3D的可信根参考设计

    该设计采用莱迪思Sentry IP帮助您开发和测试一套完整的符合NIST 800-193规范的PFR解决方案。您还可以对其进行修改满足特定需求。
    莱迪思Sentry采用MachXO3D的可信根参考设计
  • 莱迪思Sentry ESB Mux IP核用于MachXO3D

    IP Core

    莱迪思Sentry ESB Mux IP核用于MachXO3D

    用于莱迪思Sentry的Propel IP模块:访问MachXO3D的嵌入式安全模块(ESB)的同时进行内部加密操作
    莱迪思Sentry ESB Mux IP核用于MachXO3D
  • 莱迪思Sentry I2C监视器IP核用于MachXO3D

    IP Core

    莱迪思Sentry I2C监视器IP核用于MachXO3D

    用于莱迪思Sentry的Propel IP模块:监视I2C总线上的通信,识别和阻止潜在的非法通信。
    莱迪思Sentry I2C监视器IP核用于MachXO3D
  • 莱迪思Sentry QSPI Streamer IP核用于MachXO3D

    IP Core

    莱迪思Sentry QSPI Streamer IP核用于MachXO3D

    用于莱迪思Sentry的Propel IP模块:提供高速SPI存储器访问便于可信根平台操作中的固件身份验证
    莱迪思Sentry QSPI Streamer IP核用于MachXO3D
  • 莱迪思Sentry QSPI监视器IP核用于MachXO3D

    IP Core

    莱迪思Sentry QSPI监视器IP核用于MachXO3D

    用于莱迪思Sentry的Propel IP模块:监视SPI/QSPI总线上的通信,可识别和阻止潜在的非法通信。
    莱迪思Sentry QSPI监视器IP核用于MachXO3D
  • Lattice Sentry Root of Trust Reference Design for Mach-NX

    Reference Design

    Lattice Sentry Root of Trust Reference Design for Mach-NX

    This design utilizes Platform Firmware Resiliency System Root of Trust to help develop and test a complete NIST 800-193 compliant security system that protects, detects, and recovers.
    Lattice Sentry Root of Trust Reference Design for Mach-NX
  • 莱迪思Sentry 2.2 BKC参考设计

    Reference Design

    莱迪思Sentry 2.2 BKC参考设计

    莱迪思Sentry最佳配置(Best-Known Configrations)参考设计为实现PFR设计提供了基本框架。
    莱迪思Sentry 2.2 BKC参考设计
  • Tektagon™ XFR Platform Root of Trust Hardware Security Solution

    IP Core

    Tektagon™ XFR Platform Root of Trust Hardware Security Solution

    Tektagon XFR - an integrated Platform Root of Trust solution using Lattice Sentry, with low-power secure control FPGAs running pre-verified, PFR-compliant IP.
    Tektagon™ XFR Platform Root of Trust Hardware Security Solution
  • Page 1 of 1
    First Previous
    1
    Next Last