莱迪思解决方案

IP Core

FFT 编译器

The FFT Compiler IP Core can be configured to perform forward FFT, inverse FFT (IFFT), or port selectable forward/inverse FFT.

ECP5 / ECP5-5G, LatticeECP3, LatticeECP2/M, LatticeXP2, Certus-NX, CertusPro-NX, MachXO5-NX, CrossLink-NX, Avant-E, Avant-G, Avant-X 

Data Communication, DSP, Guidance Systems, Automotive, DSP Bundle, SDR 

IP Core

FIR 滤波器生成器

可灵活配置的多通道FIR滤波器。最多支持256个通道，每个拥有2048个抽头。输入和系数宽度为4至32位。

ECP5 / ECP5-5G, LatticeECP3, LatticeXP2, CrossLink-NX, Certus-NX, CertusPro-NX, MachXO5-NX, Avant-E, Avant-G, Avant-X 

DSP, Guidance Systems, Automotive, DSP Bundle, SDR 

IP Core

JESD204B IP核

莱迪思JESD204B IP核是用于数据转换器和FPGA器件之间的高速串行接口，用于取代传统接口。

ECP5 / ECP5-5G, LatticeECP3, CertusPro-NX 

ADC/DAC, DSP, SDR 

IP Core

10Gb Ethernet MAC+PHY IP Core

The Lattice 10G Ethernet (GbE) IP core supports the ability to transmit and receive data between a host processor and an Ethernet network.

Avant-G, Avant-X, CertusPro-NX 

Ethernet, PCS, XGMII, AXI4, Ethernet Bundle, SDR 

IP Core

25Gb以太网MAC+PHY IP核

莱迪思半导体的25G以太网（GbE）IP核支持在主机处理器和以太网网络之间发送和接收数据。

Avant-X 

Ethernet, Lattice Avant, IEEE 802.3, Ethernet Bundle, SDR 

IP Core

PCI Express x1、x4 Root Complex Lite IP核

Provides a PCI Express x1 and x4 root complex solution from the electrical SERDES interface, physical layer, data link layer and a minimum transaction layer in PCIe protocol stack

ECP5 / ECP5-5G, LatticeECP3, LatticeECP2/M 

PCIe, Guidance Systems, Automotive, PCIe Bundle, SDR 

Avant-E评估板

使用Avant-E中端FPGA进行快速原型设计和测试，可用于网络边缘应用，板载LPDDR4存储器和与FMC、SMA和PMOD连接的灵活的I/O。

 

 

Board

Avant-G Versa开发板

Avant-G Versa开发板拥有板载LPDDR4、PCIe Gen3。大部分I/O连接到FMC、PMOD、SMA和其他可用的连接器。

Avant-G 

Lattice Avant, SPI Flash, LPDDR4, SERDES, GPIO, PMOD, FMC, Industrial Networking 

Board

Avant-X Versa开发板

Avant-X Versa开发板支持的器件可提供现代化的功能集，用于加速系统设计和软错误检测（SED）。

Avant-X 

Lattice Avant, SPI Flash, DDR5, LPDDR4, SERDES, GPIO, PMOD, FMC, Industrial Networking 

IP Core

Image Signal Processing IP Cores Suite

The Lattice mVision ISP IP Core implements ISP pipelines for image quality enhancements in embedded designs based on Lattice FPGA devices.

CrossLink-NX, Certus-NX, CertusPro-NX, Avant-E 

AXI, AXI-Stream, AXI-Lite Interface, AWB, Camera, CCM, CFA Interpolation, Debayer, Image Processing, Image Signal Processing, Lattice mVision, RGB, Defense 

Board

CertusPro-NX Versa Board

CertusPro-NX Versa Board supports a wide range industry standards such as MIPI, SFP+, 10 GbE, LPDDR4 and PCIe (Gen3) for rapid prototyping and testing.

CertusPro-NX 

Lattice mVision, MIPI, LPDDR4, PCIe, Video Tx/Rx, IoT & Wearables, Smart Toys & Robots, Home Control Appliances & Security, Notebooks & PCs, Tablets, Printers, AR / VR & Drones, SFP, Lattice ORAN, Lattice Automate, GPIO Control, I2C, PMOD, SERDES, SMA, SPI, UART, Automotive, Industrial Networking 

Board

CrossLinkU-NX评估板

CrossLinkU-NX评估板是一个使用CrossLinkU-NX器件进行通用应用开发的平台，CrossLinkU-NX器件是首款具有硬核USB2/3（5Gbps）接口的FPGA。

CrossLink-NX 

USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 

IP Core

MACsec AES256-GCM, High-speed (XIP1213H)

The high-speed MACsec IP core implements the MACsec protocol as standardized in IEEE 802.1AE-2018, defining a security infrastructure for OSI model Layer 2 traffic.

Avant-E, Avant-G, Avant-X 

AES, Encryption, NIST, Security, ECC, Public/Private Key, SHA, SDR 

IP Core

QSPI闪存控制器IP核

QSPI闪存控制器IP可以通过标准、扩展的双/四、双或四通道SPI协议与多个外部SPI闪存器件进行通信。

Avant-E, Avant-G, Avant-X, CertusPro-NX, Certus-NX 

QSPI, SPI Flash, SPI, Flash 

Reference Design

Secure Connected Motion Control Platform

​​This platform offers resilient connectivity, low power consumption, high performance, and robust security is increasing across various industries.​

CertusPro-NX, MachXO3D 

LPDDR4, PCIe, RoT, PMOD, FMC, FTDI, ADC/DAC 

IP Core

USB 2.0/3.2 IP核

莱迪思USB 2.0/3.2 IP核提供了一种连接USB主机的解决方案，适用于莱迪思CrossLink-NX FPGA最新器件。

CrossLink-NX 

USB, USB2, USB3, AHB, AHB-L, AHB-Lite, AXI, I2C, SPI, JTAG, LVDS, SLVS, FTDI 

Reference Design

USB到I/O聚合和桥接参考设计

USB到I/O桥接参考设计为支持USB的FPGA提供即插即用外设扩展，还支持从USB到I2C、SPI和GPIO的信号协议转换。

CrossLink-NX 

USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 

演示

USB到I/O聚合和桥接演示

USB到I/O聚合和桥接演示展示了莱迪思FPGA的功能，并加速了USB 2.0/3.2（5Gbps）接口创新。

CrossLink-NX 

USB, USB2, USB3, I2C, SPI, JTAG, LVDS, SLVS, FTDI 

Reference Design

莱迪思和英伟达合作开发的网络边缘AI解决方案

该开发板充分集成到NVIDIA IGX/AGX™系统软件中，提供开源支持IP和易于编程的系统控制。

CertusPro-NX 

Ethernet, GPIO Control, SPI, I2C 

演示

GHRD/GSRD Demonstration

The Golden Hardware and Software Reference Design comprises of components for developing various kind of applications using CertusPro-NX Versa Board.

CertusPro-NX 

GHRD, GSRD, RISC-V, AXI4, MPMC, Lattice Automate, Defense