CrossLink-NX

跳转到

产品系列表
解决方案示例
视频
设计资源
文档
支持

产品系列表

CrossLink-NX器件选型指南
特性	CrossLink-NX			CrossLinkU-NX
器件	LIFCL-17	LIFCL-33	LIFCL-40	LIFCL-33U
逻辑单元	17k	33k	39k	33k
嵌入式存储器（EBR）Bit（Kb）	432	1152	1512	1152
大型存储器（LRAM）Bit（Kb）	2560	2560	1024	2560
18 X 18乘法器	24	64	56	64
ADC模块	2	—	2	—
GPLL	2	1	3	1
硬核10 Gbps D-PHY Quad	2	—	2	—
5 Gb/s PCIe Gen2硬核IP	—	—	1	—
温度等级 ¹	C, I, A	C, I	C, I, A	C, I
始终在线（AON）模块	—	—	—	1
USB 2.0/USB 3.2 Gen 1接口	—	—	—	1/1

0.4 mm I/O总数（宽范围、高性能、ADC³) (D-PHY Quad⁴, PCIe通道⁵）
	LIFCL-17	LIFCL-33	LIFCL-40	LIFCL-33U
72 WLCSP (3.7 x 4.1 mm)	45 (15, 24, 6) (1, 0)	—	—	—

0.5 mm I/O总数（宽范围、高性能、ADC³) (D-PHY Quad⁴, PCIe通道⁵）
	LIFCL-17	LIFCL-33	LIFCL-40	LIFCL-33U
72 QFN (10 x 10 mm)	46 (18, 22, 6) (1, 0)	—	44 (17, 22, 6) (1, 0)	—
84 WLCSP (3.1 x 7.4 mm)	—	60 (34, 26, 0) (0, 0)	—	44 (17, 27, 0) (0, 0)
121 csfBGA (6 x 6 mm)²	77 (23, 48, 6) (2, 0)	—	77 (23, 48, 6) (2, 0)	—
289 csBGA (9.5 x 9.5 mm)	—	—	179 (99, 74, 6) (2, 1)	—

0.65 mm I/O总数（宽范围、高性能、ADC³) (D-PHY Quad⁴, PCIe通道⁵）
	LIFCL-17	LIFCL-33	LIFCL-40	LIFCL-33U
104 fcCSP (5.5 x 8.5 mm)²	—	—	—	52 (20, 32, 0) (0, 0)

0.8 mm I/O总数（宽范围、高性能、ADC³) (D-PHY Quad⁴, PCIe通道⁵）
	LIFCL-17	LIFCL-33	LIFCL-40	LIFCL-33U
256 caBGA (14 x 14 mm)²	77 (23, 48, 6) (2, 0)	—	162 (82, 74, 6) (2, 1)	—
400 caBGA (17 x 17 mm)	—	—	191 (111, 74, 6) (2, 1)	—

1. C = 商用级；I = 工业级；A = 汽车级
2. 该封装为汽车级器件可用
3. 每个ADC pin脚总数反映了使用专用互补对和vRef
4. 每个D-PHY Quad由4个D-PHY数据通道组成
5. 每个PCIe通道由一个Tx和Rx互补对组成

解决方案示例

放大图片

USB到外设接口桥接

在支持USB的FPGA上创建即插即用外设扩展
从USB 2.0到I2C、SPI和GPIO的信号协议转换
通过USB 2.0进行信号聚合和解聚合

放大图片

通过USB进行传感器桥接

将MIPI CSI-2图像传感器桥接到USB接口
MIPI CSI-2到USB的信号协议转换
未压缩传感器带宽高达USB 3.2 Gen 1（5 Gbps）

放大图片

实现网络边缘AI

将一个或多个CSI-2图像传感器桥接至处理器接口（PCIe、CMOS、CSI-2）
多达3 Mb的内部RAM可用于处理
对象检测/计数应用中承担CPU部分推理功能
在单个器件中集视频桥接和网络边缘AI

放大图片

传感器聚合

将多达11个MIPI CSI-2图像传感器聚合到单个MIPI CSI-2输出中
将数据拼接到较大的水平视频帧中
使用外部DDR存储器将数据拼接到较大的垂直视频帧中
使用唯一的虚拟通道编号仲裁来自图像传感器的数据
扩展处理器上有限的传感器接口，连接更多传感器

放大图片

图像传感器处理

将一个或多个CSI-2 图像传感器桥接至处理器接口（PCIe、CMOS、CSI-2）
集成了全功能通用视频处理流水线
使用示例：Debayer、颜色校正矩阵、RGB增益、伽玛校正等
承担处理器的ISP功能

放大图片

信号拆分或复制

将CSI-2 / DSI的输入信号拆分或复制到多个视频输出（最多14个）
在注重安全的应用中为传感器数据提供冗余
轻松实现需要一个输入到多个显示输出的应用

This demo showcases a robust speaker identification model developed and deployed by Aizip Inc. The efficient neural network-based model can register multiple speakers and provide accurate, low-latency identification results. Co-designed to leverage the superior capabilities of the Lattice CrossLink™-NX-33 board, it features an optimized hardware accelerator to support model computations.

Arrow & Citrobits Cross-Platform Vision AI Workloads Enabled by Lattice CrossLinkU™-NX

The Lattice CrossLinkU™-NX FPGA implements the USB Video Device Class (UVC) standard, allowing you to directly connect a MIPI-based camera module to various application processors, like the NVIDIA Jetson, Qualcomm QCS6490, and NXP i.MX9x. This is made possible by the Citrobits CrossLinkU-NX-based CBM110 USB bridge/aggregator module, which acts as a bridge between the MIPI camera module and the USB interface. The UVC standard simplifies the process of integrating the camera with the host processor.

Helion GmbH Smart Home Video Surveillance

This demo features a smart, low-power home video surveillance system based on the Lattice CrossLink™-NX 40 platform. It delivers 1080p30 video with less than 1.5W power consumption for the entire camera. The ispChain used in this demo will be available for customer use across all Lattice Nexus™ and Lattice Avant™ devices.

Industrial HMI

This demo showcases industrial human-machine interface (HMI) with advanced operated attention sensing and identification. Seamlessly connect with your machinery, gaining real-time insights and control.

Lattice CrosslinkU-NX USB3 Vision (U3V) Reference Design

The USB3 Vision Reference Design with Lattice CrosslinkU-NX device enables video streaming solution from external image sensor to host through MIPI <-> USB3. This solution is in compliance with USB3 Vision standard V1.2 which is widely applicable in Industrial and IOT segment. U3V RD provides methods for camera control, triggering, synchronization through software integration that follows GenICam standard.

Lumotive Beam Steering Chip-Based Lidar

This demonstration showcases Light Surface Metamaterial (LCM) technology for advanced beam steering. Similar to developing a camera module, it features software-defined ROI capabilities for Virtual lidars. This cutting-edge technology offers extended range, higher FPS, and enhanced resolution, all dynamically driven by object detection or perception layers.

SLS MIPI Cameras to USB3 Bridging Using USB Video Class & RAW Data Transfer over USB3

Dual MIPI D-PHY CSI-2 to USB3 Video Class Bridge on Lattice CrossLink™-NX: Seamlessly convert MIPI streams to USB3 with our cutting-edge FPGA design. This solution leverages the OS’s built-in USB Video Class driver, eliminating the need for USB driver development.Real-Time USB3 Throughput Measurement Using Lattice CrossLinkU™-NX: This demonstration accurately assesses data transfer speeds to ensure optimal performance. The Lattice CrossLinkU-NX platform provides a robust and reliable environment for capturing high-speed data.

TinyVision.ai Object Detection/Tracking on CrosslinkU-NX33: StreamLogic

This demonstration showcases Object Detection/Tracking on CrosslinkU-NX33 with StreamLogic, utilizing the TinyVision tinyCLUNX33 SoM and a no-code GUI with RTL generation. Features include an ISP supporting 1920x1080 at 30 fps, advanced image processing, and accelerated object detection based on edge detection.

TinyVision.ai tinyCLUNX33 SoM Lattice CrossLinkU™-NX33

The tinyCLUNX33 SoM featuring the Lattice CrossLinkU-NX33 is a highly integrated, production-friendly System on Module designed for rapid prototyping with a clear path to production.

CrossLink-NX发布

CrossLink-NX FPGA是首款采用全新莱迪思Nexus技术平台设计的产品系列，为网络边缘开发工程师提供实现创新的嵌入式视觉解决方案所需的更低功耗、小尺寸和高可靠性。

CrossLink-NX：低功耗视频演示

本演示使用市面上提供的开发板测量了莱迪思CrossLink-NX FPGA以及其他同类FPGA的功耗比较。

CrossLink-NX：瞬时启动演示

本演示使用市面上提供的开发板测量Lattice CrossLink-NX FPGA对比其他同类FPGA的IO唤醒时间。

CrossLink-NX: 嵌入式视觉演示

本演示展示了一块搭载基于莱迪思Nexus技术平台的CrossLink-NX FPGA的开发板。该FPGA被编程实现摄像头聚合这一常见的嵌入式视觉应用。

CrossLink-NX: 人员检测演示

本演示展示了一块搭载基于莱迪思Nexus技术平台的CrossLink-NX FPGA的开发板。该FPGA被编程实现人员存在检测和计数这一常见的人工智能应用。

Awards

放大图片

Electroniques 2021 Electrons D'or Awards

Digital IC

放大图片

Business Intelligence AI Excellence Award

2021 Finalist

放大图片

The Electronics Industry Awards 2020

Embedded Solution Product of the Year

放大图片

Leadership in Engineering Achievement Program (LEAP) Awards 2020

Bronze Medal- Embedded Computing Category

放大图片

2020 Electronics Maker Best of Industry Awards

Best FPGA Award (Technology & Product Innovation category)

设计资源

开发套件和开发板

我们的开发板和开发套件能够简化您的设计流程

基于CrossLink-NX的开发套件和开发板

IP和参考设计

使用经过预先测试、可重复使用的功能简化您的设计工作

CrossLink-NX的IP和参考设计

软件

覆盖整个设计流程，非常易于使用

Lattice Radiant软件

文档

快速参考

技术资源

资讯资源

White Paper

下载

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	CrossLink-NX-33 and CrossLinkU-NX Data Sheet	FPGA-DS-02104	1.00	8/8/2024	PDF	1.9 MB
a	a	CrossLink-NX Family Data Sheet	FPGA-DS-02049	2.1	9/22/2024	PDF	3.8 MB
a	a	Memory User Guide for Nexus Platform	FPGA-TN-02094	1.6	3/19/2024	PDF	1.8 MB
a	a	Package Diagrams	FPGA-DS-02053	8.4	12/11/2024	PDF	9 MB
a	a	Triple-Speed Ethernet MAC Driver API Reference	FPGA-TN-02341	1.1	7/29/2024	PDF	398.2 KB
a	a	Power Management and Calculation for CrossLink-NX Devices	FPGA-TN-02075	1.3	7/15/2021	PDF	1 MB
a	a	sysCLOCK PLL Design and User Guide for Nexus Platform	FPGA-TN-02095	2.5	8/1/2024	PDF	1.8 MB
a	a	sysI/O User Guide for Nexus Platform	FPGA-TN-02067	2.4	7/18/2024	PDF	676.5 KB
a	a	sysDSP User Guide for Nexus Platform	FPGA-TN-02096	1.7	6/26/2024	PDF	1.3 MB
a	a	sysCONFIG User Guide for Nexus Platform	FPGA-TN-02099	3.2	10/8/2024	PDF	2.7 MB
a	a	CrossLink-NX-33 and CrossLinkU-NX High-Speed I/O Interface	FPGA-TN-02280	0.85	9/1/2024	PDF	1.4 MB
a	a	I2C Hardened IP Usage Guide for Nexus Platform	FPGA-TN-02142	1.3	5/31/2022	PDF	1.4 MB
a	a	CrossLink-NX-33 and CrossLinkU-NX Hardware Checklist	FPGA-TN-02308	1.3	8/27/2024	PDF	969 KB
a	a	ADC User Guide for Nexus Platform	FPGA-TN-02129	1.8	11/6/2024	PDF	1.1 MB
a	a	CrossLink-NX Hardware Checklist	FPGA-TN-02149	1.6	6/30/2024	PDF	684.9 KB
a	a	Soft Error Detection (SED)/Correction (SEC) User Guide for Nexus Platform	FPGA-TN-02076	2.1	7/18/2024	PDF	614.6 KB
a	a	Multi-Boot User Guide for Nexus Platform	FPGA-TN-02145	2.2	1/7/2025	PDF	1.4 MB
a	a	Single Event Upset (SEU) Report for Nexus Platform	FPGA-TN-02174	1.6	8/1/2024	PDF	368 KB
a	a	CrossLink-NX High-Speed I/O Interface	FPGA-TN-02097	1.9	4/4/2024	PDF	2.8 MB
a	a	CrossLink-NX Hardened D-PHY Usage Guide	FPGA-TN-02081	1.1	6/21/2021	PDF	1.2 MB
a	a	MIPI D-PHY Bandwidth Matrix and Implementation	FPGA-TN-02090	1.3	5/23/2024	PDF	947.5 KB
a	a	Sub-LVDS Signaling Using Lattice Devices	FPGA-TN-02028	2.6	12/10/2024	PDF	560.4 KB
a	a	PCB Layout Recommendations for BGA Packages	FPGA-TN-02024	5.6	12/10/2024	PDF	6.2 MB
a	a	Thermal Management	FPGA-TN-02044	5.4	12/10/2024	PDF	1018.3 KB
a	a	Using TraceID	FPGA-TN-02084	2.7	12/10/2024	PDF	408 KB
a	a	Wafer-Level Chip-Scale Package Guide	FPGA-TN-02312	1.1	6/23/2022	PDF	236.5 KB
a	a	Minimizing System Interruption During Configuration Using TransFR Technology	FPGA-TN-02198	4.4	10/17/2023	PDF	1.4 MB
a	a	I3C Controller Driver API Reference	FPGA-TN-02342	1.0	12/21/2023	PDF	894.8 KB
a	a	I3C Target Driver API Reference	FPGA-TN-02338	1.0	12/21/2023	PDF	769.7 KB
a	a	CrossLink-NX caBGA256 Pin Migration Table	FPGA-SC-02014	1.0	10/27/2020	CSV	16.5 KB
a	a	CrossLink-NX QFN72 Pin Migration Table	FPGA-SC-02015	1.1	5/25/2022	CSV	5.6 KB
a	a	CrossLink-NX csfBGA121 Pin Migration Table	FPGA-SC-02016	1.0	10/27/2020	CSV	9.2 KB
a	a	CrossLink-NX LIFCL-33-Pinout	FPGA-SC-02040	0.80	8/31/2023	CSV	3.5 KB
a	a	CrossLink-NX LIFCL-17 Pinout	FPGA-SC-02006	0.92	10/26/2020	CSV	10.6 KB
a	a	CrossLink-NX LIFCL-40 Pinout	FPGA-SC-02018	1.21	12/28/2020	CSV	35.5 KB
a	a	CrossLink-NX LIFCL-33U-Pinout	FPGA-SC-02050	0.7	9/26/2023	CSV	4.3 KB
a	a	Lattice Memory Mapped Interface (LMMI) and Lattice Interrupt Interface (LINTR) User Guide	FPGA-UG-02039	1.2	5/31/2022	PDF	1.7 MB
a	a	Common Programming and Configuration FAQs with Supplementary Concepts for CrossLink-NX, Certus-NX, and CertusPro-NX	FPGA-AN-02048	1.5	1/16/2025	PDF	1.8 MB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	CrossLink-NX-33 and CrossLinkU-NX Data Sheet	FPGA-DS-02104	1.00	8/8/2024	PDF	1.9 MB
a	a	CrossLink-NX Family Data Sheet	FPGA-DS-02049	2.1	9/22/2024	PDF	3.8 MB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a		Advanced Configuration Security Usage Guide for Nexus Platform This document would be provided through Technical Support Request after sign-in to Lattice web site. Please refer to Answer Database FAQ 6848 for detail instruction	FPGA-TN-02176	1.9	8/27/2024	WEB
a	a	Memory User Guide for Nexus Platform	FPGA-TN-02094	1.6	3/19/2024	PDF	1.8 MB
a	a	Migrating Designs from AMD CPLD/FPGA Devices to Lattice FPGA Devices	FPGA-AN-02081	1.1	8/27/2024	PDF	2.6 MB
a	a	Triple-Speed Ethernet MAC Driver API Reference	FPGA-TN-02341	1.1	7/29/2024	PDF	398.2 KB
a	a	Power Management and Calculation for CrossLink-NX Devices	FPGA-TN-02075	1.3	7/15/2021	PDF	1 MB
a	a	sysCLOCK PLL Design and User Guide for Nexus Platform	FPGA-TN-02095	2.5	8/1/2024	PDF	1.8 MB
a	a	sysI/O User Guide for Nexus Platform	FPGA-TN-02067	2.4	7/18/2024	PDF	676.5 KB
a	a	sysDSP User Guide for Nexus Platform	FPGA-TN-02096	1.7	6/26/2024	PDF	1.3 MB
a	a	sysCONFIG User Guide for Nexus Platform	FPGA-TN-02099	3.2	10/8/2024	PDF	2.7 MB
a	a	CrossLink-NX-33 and CrossLinkU-NX High-Speed I/O Interface	FPGA-TN-02280	0.85	9/1/2024	PDF	1.4 MB
a	a	I2C Hardened IP Usage Guide for Nexus Platform	FPGA-TN-02142	1.3	5/31/2022	PDF	1.4 MB
a	a	Adding Scalable Power and Thermal Management to Nexus FPGAs	FPGA-AN-02079	1.0	1/31/2024	PDF	1.3 MB
a	a	CrossLink-NX-33 and CrossLinkU-NX Hardware Checklist	FPGA-TN-02308	1.3	8/27/2024	PDF	969 KB
a	a	CrossLink-NX-33 Image Sensor Module Design Guide	FPGA-AN-02054	1.0	6/16/2022	PDF	396.1 KB
a	a	ADC User Guide for Nexus Platform	FPGA-TN-02129	1.8	11/6/2024	PDF	1.1 MB
a	a	CrossLink-NX Hardware Checklist	FPGA-TN-02149	1.6	6/30/2024	PDF	684.9 KB
a	a	Soft Error Detection (SED)/Correction (SEC) User Guide for Nexus Platform	FPGA-TN-02076	2.1	7/18/2024	PDF	614.6 KB
a	a	Multi-Boot User Guide for Nexus Platform	FPGA-TN-02145	2.2	1/7/2025	PDF	1.4 MB
a	a	Single Event Upset (SEU) Report for Nexus Platform	FPGA-TN-02174	1.6	8/1/2024	PDF	368 KB
a	a	CrossLink-NX High-Speed I/O Interface	FPGA-TN-02097	1.9	4/4/2024	PDF	2.8 MB
a	a	CrossLink-NX Hardened D-PHY Usage Guide	FPGA-TN-02081	1.1	6/21/2021	PDF	1.2 MB
a	a	MIPI D-PHY Bandwidth Matrix and Implementation	FPGA-TN-02090	1.3	5/23/2024	PDF	947.5 KB
a	a	Sub-LVDS Signaling Using Lattice Devices	FPGA-TN-02028	2.6	12/10/2024	PDF	560.4 KB
a	a	Solder Reflow Guide for Surface Mount Devices	FPGA-TN-02041	5.0	12/10/2024	PDF	568.4 KB
a	a	PCB Layout Recommendations for BGA Packages	FPGA-TN-02024	5.6	12/10/2024	PDF	6.2 MB
a	a	Thermal Management	FPGA-TN-02044	5.4	12/10/2024	PDF	1018.3 KB
a	a	Using TraceID	FPGA-TN-02084	2.7	12/10/2024	PDF	408 KB
a	a	Wafer-Level Chip-Scale Package Guide	FPGA-TN-02312	1.1	6/23/2022	PDF	236.5 KB
a	a	Minimizing System Interruption During Configuration Using TransFR Technology	FPGA-TN-02198	4.4	10/17/2023	PDF	1.4 MB
a	a	I3C Controller Driver API Reference	FPGA-TN-02342	1.0	12/21/2023	PDF	894.8 KB
a	a	I3C Target Driver API Reference	FPGA-TN-02338	1.0	12/21/2023	PDF	769.7 KB
a	a	Common Programming and Configuration FAQs with Supplementary Concepts for CrossLink-NX, Certus-NX, and CertusPro-NX	FPGA-AN-02048	1.5	1/16/2025	PDF	1.8 MB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	Package Diagrams	FPGA-DS-02053	8.4	12/11/2024	PDF	9 MB
a	a	CrossLink-NX caBGA256 Pin Migration Table	FPGA-SC-02014	1.0	10/27/2020	CSV	16.5 KB
a	a	CrossLink-NX QFN72 Pin Migration Table	FPGA-SC-02015	1.1	5/25/2022	CSV	5.6 KB
a	a	CrossLink-NX csfBGA121 Pin Migration Table	FPGA-SC-02016	1.0	10/27/2020	CSV	9.2 KB
a	a	CrossLink-NX-40-BG256-DD		1.0	10/16/2024	CSV	29.3 KB
a	a	CrossLink-NX LIFCL-33-Pinout	FPGA-SC-02040	0.80	8/31/2023	CSV	3.5 KB
a	a	CrossLink-NX LIFCL-17 Pinout	FPGA-SC-02006	0.92	10/26/2020	CSV	10.6 KB
a	a	CrossLink-NX-17-Package-DD		1.0	1/10/2024	CSV	19 KB
a	a	CrossLink-NX LIFCL-40 Pinout	FPGA-SC-02018	1.21	12/28/2020	CSV	35.5 KB
a	a	CrossLink-NX and Certus-NX Pin Migration	FPGA-TN-02218	1.0	3/22/2024	PDF	495.5 KB
a	a	CrossLink-NX LIFCL-33U-Pinout	FPGA-SC-02050	0.7	9/26/2023	CSV	4.3 KB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	Always ON Module - User Guide	FPGA-IPUG-02216	1.0	9/26/2023	PDF	554.6 KB
a	a	Lattice Memory Mapped Interface (LMMI) and Lattice Interrupt Interface (LINTR) User Guide	FPGA-UG-02039	1.2	5/31/2022	PDF	1.7 MB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	subLVDS to MIPI CSI-2 Image Sensor Bridge with CrossLink-NX - Documentation	FPGA-RD-02217	1.0	5/1/2021	PDF	2.5 MB
a	a	subLVDS to MIPI CSI-2 Image Sensor Bridge with CrossLink-NX - Source Code	FPGA-RD-02217	1.0	5/1/2021	ZIP	6.2 MB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	Notification of Changes to CrossLink-NX™ Data Sheet and Certus-NX™ Data Sheet	PCN02A-22	1.0	4/4/2022	PDF	329.6 KB
a	a	PCN02A-21- Release of Crosslink‐NX Datasheet Revision 1.2	PCN02A-21	1.0	10/19/2021	PDF	93.7 KB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	Lattice OrCAD Capture Schematic Library (OLB) This file contains an OrCAD Capture Schematic Library (OLB file type) for all Lattice products. This .zip file also includes a .xls worksheet with a list of the contents of the OLB. These symbols can be used to help with OrCAD schematic designs.	FPGA-SC-02005	8.4	12/10/2024	ZIP	2.7 MB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	莱迪思 Crosslink-NX：专注网络边缘嵌入式视觉处理		1.0	1/18/2020	PDF	646.1 KB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	[BSDL] LIFCL-33 BBG484	FPGA-MD-02029	1.15	6/7/2022	BSM	32 KB
a	a	[BSDL] LIFCL-33 WLCSP84	FPGA-MD-02030	1.15	6/7/2022	BSM	20.6 KB
a	a	[BSDL] LIFCL-33U WLCSP84	FPGA-MD-02050	1.14	9/26/2023	BSM	18.9 KB
a	a	[BSDL] LIFCL-40	FPGA-MD-02061	1.0	4/15/2024	ZIP	35.3 KB
a	a	[BSDL] LIFCL-33U FCCSP104	FPGA-MD-02051	1.14	9/26/2023	BSM	20.4 KB
a	a	[BSDL] LIFCL-17	FPGA-MD-02010	1.14	12/16/2019	ZIP	19.2 KB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	CrossLink-NX Device Family DELPHI Models	FPGA-MD-02032	1.0	12/10/2019	ZIP	191.5 KB
a	a	CrossLinkU-NX DELPHI Models	FPGA-MD-02054	0.81	10/19/2023	ZIP	22.7 KB

		标题	编号	版本	日期	格式	文件大小
a		选择全部
a	a	[IBIS] LIFCL-33 and LIFCL-33U	FPGA-MD-02036	1.2	6/27/2024	ZIP	12.5 MB
a	a	[IBIS] LIFCL-17 and LIFCL-40	FPGA-MD-02067	1.0	6/27/2024	ZIP	12.6 MB

支持

技术支持

有问题？我们来帮助您

设计软件

授权

发现您需要的软件和IP授权

更多授权信息

质量和可靠性

参考资料帮助解答您的问题

质量和可靠性中心

产品变更通知（PCN）

服务

外部资源帮助您完成工作

培训

Aerospace & Defense

解决方案集合

汽车

工厂自动化

其他工业领域

客户端计算

解决方案集合

数据中心和边缘计算

无线

有线

家庭

移动

解决方案集合

控制和安全

FPGA平台

通用FPGA

超低功耗

视频互连

软件工具

解决方案

解决方案集合

支持中心

软件许可

质量和可靠性

设计服务

编程

保障供应链安全

培训

停产产品

旧版本软件和文档

销售导航

销售导航

销售导航

莱迪思产品

停产的产品

关于莱迪思

投资者关系

新闻中心

职业中心

CrossLink-NX：用于嵌入式视觉处理的FPGA

实现MIPI桥接和网络边缘AI

相关产品

相关应用

特性

跳转到

USB到外设接口桥接

通过USB进行传感器桥接

实现网络边缘AI

传感器聚合

图像传感器处理

信号拆分或复制

AIZip Ultra-Efficient Speaker Identification Model on Lattice CrossLink™-NX-33

Arrow & Citrobits Cross-Platform Vision AI Workloads Enabled by Lattice CrossLinkU™-NX

Helion GmbH Smart Home Video Surveillance

Industrial HMI

Lattice CrosslinkU-NX USB3 Vision (U3V) Reference Design

Lumotive Beam Steering Chip-Based Lidar

SLS MIPI Cameras to USB3 Bridging Using USB Video Class & RAW Data Transfer over USB3

TinyVision.ai Object Detection/Tracking on CrosslinkU-NX33: StreamLogic

TinyVision.ai tinyCLUNX33 SoM Lattice CrossLinkU™-NX33

CrossLink-NX发布

CrossLink-NX：低功耗视频演示

CrossLink-NX：瞬时启动演示

CrossLink-NX: 嵌入式视觉演示

CrossLink-NX: 人员检测演示

Electroniques 2021 Electrons D'or Awards

Business Intelligence AI Excellence Award

The Electronics Industry Awards 2020

Leadership in Engineering Achievement Program (LEAP) Awards 2020

2020 Electronics Maker Best of Industry Awards

开发套件和开发板

IP和参考设计

软件

请登录网站账户之后订阅更新通知

技术支持

授权

质量和可靠性

服务

ABOUT LATTICE

SALES