Lattice Solutions

Board

Avant-E Evaluation Board

The Avant-E Evaluation Board has the ability to expand the usability of the Avant-E FPGA with FMC HPC, PMOD, and Raspberry PI connectors.

Avant-E 

Lattice Avant, SPI Flash, LPDDR4, SERDES, GPIO, PMOD, FMC, Industrial Networking, SDR 

Board

CertusPro-NX Versa Board

CertusPro-NX Versa Board supports a wide range industry standards such as MIPI, SFP+, 10 GbE, LPDDR4 and PCIe (Gen3) for rapid prototyping and testing.

CertusPro-NX 

Lattice mVision, MIPI, LPDDR4, PCIe, Video Tx/Rx, IoT & Wearables, Smart Toys & Robots, Home Control Appliances & Security, Notebooks & PCs, Tablets, Printers, AR / VR & Drones, SFP, Lattice ORAN, Lattice Automate, GPIO Control, I2C, PMOD, SERDES, SMA, SPI, UART, Automotive, Industrial Networking 

Board

Embedded Vision Development Kit

Three-board Video Interface Platform (VIP) modular kit. Includes 2 MIPI/D-PHY camera input, FPGA processing, HDMI output. More Input/Output boards available.

CrossLink, ECP5 / ECP5-5G 

3D Video, Camera, DDR SDRAM, HDMI, Image Processing, Machine Learning/AI, Lattice sensAI, Signal Aggregation, Video Tx/Rx, VIP, Lattice mVision, IoT & Wearables, Smart Toys & Robots, Home Control Appliances & Security, Notebooks & PCs, Tablets, Printers, AR / VR & Drones, UAVs 

Board

CertusPro-NX PCIe Bridge Board

The CertusPro-NX PCIe Bridge Board enables video bridge capabilities to PCIe and embedded vision type applications.

CertusPro-NX 

Lattice mVision, PCIe, JTAG, SPI Flash, LPDDR4, PMOD, SERDES, X/S/RGMII, Industrial Networking, FMC 

Board

CrossLink-NX Voice and Vision Machine Learning Board

Designed for low-power machine learning applications with Lattice sensAI and CrossLink-NX. Includes image sensors, microphones, HyperRAM, and expansion ports.

CrossLink-NX 

CSI-2, CSI Camera, Camera, Microphone, PMOD, HyperRAM, Machine Learning/AI, Lattice sensAI, Automotive 

Board

CrossLink-NX-33 Voice and Vision Machine Learning Board

CrossLink-NX-33 Voice and Vision Machine Learning Board is designed using Crosslink-NX 33K, ideal for machine learning applications.

CrossLink-NX 

CSI-2, SPI, CSI Camera, Camera, Microphone, PMOD, Machine Learning/AI, Lattice sensAI, Automotive 

Board

Lattice Sentry Demo Board for Mach-NX

A complete platform to help you develop and test a NIST 800-193-compliant PFR solution. Includes numerous features to enable debug, interface and expansion

Mach-NX 

UAVs, Defense, Soft Processor, SPI Flash, Raspberry Pi, Security, Lattice Sentry 

Board

Lattice Sentry Demo Board for MachXO3D

A complete platform to help you develop and test a NIST 800-193-compliant PFR solution. Includes numerous features to enable debug, interface and expansion

MachXO3D 

Soft Processor, SPI Flash, Raspberry Pi, Security, Lattice Sentry, UAVs 

Board

Certus-NX Versa Evaluation Board

The Certus-NX Versa Evaluation Board enables designers with connectivity features of the Certus-NX FPGA and assist engineers with prototyping and testing.

Certus-NX 

Camera, CSI Camera, DDR SDRAM, Ethernet, PCIe, PMOD, RJ-45, X/S/RGMII, UAVs, Lattice Automate, Automotive 

Board

CrossLink-NX Evaluation Board

For general evaluation and development with CrossLink-NX, includes many flexible interfaces such as FMC and PMOD with generous device IO access

CrossLink-NX 

Arduino, Breakout, FMC, PMOD, Raspberry Pi, SMA, SPI Flash, CSI-2, AR / VR & Drones, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, Defense, Automotive 

Board

CrossLink-NX VIP Sensor Input Board

Intended for use with the Lattice Embedded Vision Development Kit. Includes 4 camera inputs and HyperRam for embedded video applications with CrossLink-NX

CrossLink-NX 

VIP, Camera, CSI Camera, CSI-2, HyperRAM, Image Processing, Machine Learning/AI, Lattice sensAI, Parallel Video, PMOD, SPI Flash, Video Aggregation, Video Bridge, Video Tx/Rx, Lattice mVision, AR / VR & Drones, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, Defense, Automotive 

Board

CertusPro-NX Voice and Vision Machine Learning Board

Design AI use cases for the Edge quickly! This board along with the Lattice sensAI solution stack provide the tools for developing vision and audio-based AI applications.

CertusPro-NX 

Machine Learning/AI, DSP, PMOD, Camera, Lattice sensAI, Space, Automotive 

Board

Lattice ORAN Timing and Synchronization Kit

ORAN Sync Board has 2x 10GE & 2x 1GE ports, SMA & FMC connectors for testing, demos, development, GNSS & on-board timing sources, ToD, & PPS RJ48 connectors

CertusPro-NX 

5G, Lattice ORAN, FMC, SMA, IEEE1588 

Board

MachXO5T-NX Development Board

The MachXO5T-NX Development Board offers a variety of features and programmability that enhances Secure Control PLD functionality with Multiple Boot.

MachXO5-NX 

ADC/DAC, Hirose FX12, I2C, RJ-45, SPI, PMOD, LED Control, LVDS Video 

Board

MachXO5™-NX Development Board

Allows designers to work with features of MachXO5-25 and L-ASC10 hardware management expander to assist in rapid prototyping and testing of specific designs

MachXO5-NX 

ADC/DAC, Hirose FX12, I2C, RJ-45, SPI, PMOD, LED Control, LVDS Video 

Board

USB3-GbE VIP IO Board

Output board for Video Interface Platform (VIP) and Embedded Vision Development Kit - adds video over USB 3.0 and Gigabit Ethernet.

CrossLink, ECP5 / ECP5-5G 

Ethernet, USB3, Video Tx/Rx, VIP, Lattice mVision, Defense 

Board

ECP5 Evaluation Board

Evaluation and development for ECP5-5G FPGA - 85K LUTs. Includes generous IO access and easy expansion to PMOD, Arduino, RaspberryPI, SERDES interface and more

ECP5 / ECP5-5G 

Arduino, Breakout, PMOD, Raspberry Pi, SERDES, Versa Connector, TOR Switch, AR / VR & Drones, Defense 

Board

Modular FMC Adapter

The Modular FMC Adapter is the base board connecting the Lattice FPGA development kits through the FMC connector up to two transmitter & receiver boards.

CertusPro-NX 

Lattice Drive, DisplayPort, Video Scaling, Local Dimming, LVDS, MIPI, eDP, FMC 

Board

CertusPro-NX Evaluation Board

CertusPro-NX Evaluation Board, a FPGA-based rapid prototyping and testing of specific designs with the features of CertusPro-NX FPGA family.

CertusPro-NX 

Breakout, SMA, SPI Flash, Raspberry Pi, FMC, SERDES, PMOD, Automotive, SDR 

Board

eUSB 3.1 FMC

eUSB 3.1 FMC board is to validate USB 3.1 functionality with FPGA’s inbuilt serial transceivers. It has ULPI PHY chip to validate USB 2.0 functionality.

CrossLink-NX 

FMC, Data Compression, DSP, USB Type-C, USB3, Camera, Image Processing, Video Tx/Rx