Community Sourced

Additional Development Boards Developed by Open Source Community

Our system is going under maintenance starting September 22, 2023 at 8 PM Pacific and ending September 24, 2023 at 2:00 PM Pacific. During this window, the website may not be reachable. For immediate assistance, please contact techsupport@latticesemi.com.


Newsletter Subscription

In addition to proprietary boards developed by Lattice and other partners there is a broad array of boards developed by the open source community. In some cases just the designs are available and in other cases there are sources available for purchasing assembled boards.

For your convenience we list some of the more popular and interesting Community Sourced boards on the Lattice website. See below. Lattice does not evaluate or certify community sourced boards so you will want to make your own assessment as to fitness for your application. Also note many of the links in these listings lead to other websites and that Lattice is not responsible for this content.

Have a board that you think should be listed here? Let us know

Community Sourced

Development Kits & Boards

Space Development Board by Adiuvo

Board

Space Development Board by Adiuvo

Developed by a team of experienced engineers for space and with prototyping space applications in mind, the board provides access to the commercial equivalent of the space grade Certus™-NX-RT, making it ideal for prototyping and test campaigns to increase the Technology Readiness Level.
Certus-NX 
Community Sourced, Raspberry Pi, SpaceWire 
Space Development Board by Adiuvo
LimeSDR Mini Development Board by Lime Microsystems

Board

LimeSDR Mini Development Board by Lime Microsystems

LimeSDR Mini Dev Board is a low cost, open source and apps-enabled SDR platform that can be used to support any type of wireless communication standard.
ECP5 / ECP5-5G 
Community Sourced, RF Transceiver, FTDI, GPIO, JTAG 
LimeSDR Mini Development Board by Lime Microsystems
SDI to MIPI CSI-2 Bridge by Antmicro

Board

SDI to MIPI CSI-2 Bridge by Antmicro

This device using Lattice CrossLink LIF-MD6000-6KMG80I that enables connecting industrial and filmmaking cameras and video accessories to edge AI platforms which often include the MIPI CSI-2 interface.
CrossLink 
Community Sourced, MIPI, I2C, SPI, SDI Video 
SDI to MIPI CSI-2 Bridge by Antmicro
Fomu by Sutajio Kosagi

Board

Fomu by Sutajio Kosagi

A tiny iCE40UP5K FPGA board that fits inside a USB port. It has four buttons, an RGB LED and comes in a plastic enclosure
iCE40 UltraPlus 
Community Sourced, USB Form Factor 
Fomu by Sutajio Kosagi
iCEBreaker FPGA by 1BitSquared

Board

iCEBreaker FPGA by 1BitSquared

Expandable iCE40 UltraPlus platform designed for open-source FPGA development tools, includes multiple PMOD connectors and more.
iCE40 UltraPlus 
Community Sourced, Breakout, PMOD 
iCEBreaker FPGA by 1BitSquared
Alhambra II board by Alhambra

Board

Alhambra II board by Alhambra

Community-sourced board for iCE40HX1K by Alhambra Bits. Designed for expansion to a complete hardware ecosystem.
iCE40 LP/HX 
Community Sourced, Breakout, Arduino 
Alhambra II board by Alhambra
Arctic Tern BMC Kit

Board

Arctic Tern BMC Kit

Arctic Tern PCIe carrier is a ModBMC-compatible low profile card, designed to provide a powerful peripheral development platform and full BMC hardware solution.
ECP5 / ECP5-5G 
RS-232, Ethernet, SERDES, NOR Flash, SPI Flash, GPIO Control, I2C, PCIe, HDMI, Community Sourced 
Arctic Tern BMC Kit
iCESugar by MuseLab

Board

iCESugar by MuseLab

Designed by MuseLab, and available from multiple sources. Includes RGB LED, Type-C + Micro-USB, PMOD. Onboard ARM-based iCELink for debug and programming.
iCE40 UltraPlus 
Community Sourced, LED Control, USB Type-C, PMOD 
iCESugar by MuseLab
Show More

Reference Designs

Basic ECP5 Dev Board by Matt Venn

Reference Design

Basic ECP5 Dev Board by Matt Venn

This is a basic ECP5 evaluation board, with a Raspberry Pi - compatible header. Source files and test patterns are available at github.
ECP5 / ECP5-5G 
Community Sourced, PMOD, Raspberry Pi, Breakout 
Basic ECP5 Dev Board by Matt Venn
BlackIce-II by myStorm

Reference Design

BlackIce-II by myStorm

This board has been prototyped, and is available as a Reference Design on GitHub and other open-source community forums. It has an on-board Arm Cortex M4 microcontroller and features PMOD, Arduino and RPi expansion headers.
iCE40 LP/HX 
Community Sourced, Arduino, PMOD, Raspberry Pi, SD Memory, Microcontroller 
BlackIce-II by myStorm
Doppler by Dadamachines

Reference Design

Doppler by Dadamachines

The doppler is a Cortex M4F Microcontroller + FPGA development board. Open source design files and documentation are available on github.
iCE40 UltraPlus 
Community Sourced, Arduino, Microcontroller 
Doppler by Dadamachines
iCE Bling by Electronut Labs

Reference Design

iCE Bling by Electronut Labs

Looking for a little fun and style? Electronut Labs has designed a pair of LED earings controlled with an iCE40UP5K FPGA. Design files are available on github.
iCE40 UltraPlus 
Community Sourced, LED Control 
iCE Bling by Electronut Labs
Pergola by kbeckmann

Reference Design

Pergola by kbeckmann

This board has been prototyped, and available as a reference design at GitHub. It is a low-cost, open-source FPGA board featuring the Lattice ECP5 FPGA.
ECP5 / ECP5-5G 
Community Sourced, PMOD 
Pergola by kbeckmann
TrellisBoard by Dave Shah

Reference Design

TrellisBoard by Dave Shah

An ECP5-based PCIe form-factor card. The board is prototyped, and available as a Reference Design on GitHub. Visit the link for more information and status.
ECP5 / ECP5-5G 
Community Sourced, PMOD, SD Memory, Ethernet, HDMI, SERDES, PCIe, DDR SDRAM 
TrellisBoard by Dave Shah

ABOUT LATTICE

SALES

SUPPORT

FOLLOW