Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type



Device Support














Tags


















































































Providers






Clear All
  • CertusPro-NX Versa Board

    Board

    CertusPro-NX Versa Board

    CertusPro-NX Versa Board supports a wide range industry standards such as MIPI, SFP+, 10 GbE, LPDDR4 and PCIe (Gen3) for rapid prototyping and testing.
    CertusPro-NX Versa Board
  • MIPI CSI-2 to HDMI Demonstration

    Demo

    MIPI CSI-2 to HDMI Demonstration

    Lattice MIPI-HDMI Demonstration is built using multiple Lattice IPs and some additional glue logic necessary to connect the IPs in a processing pipeline.
    MIPI CSI-2 to HDMI Demonstration
  • MIPI CSI-2 to HDMI Reference Design

    Reference Design

    MIPI CSI-2 to HDMI Reference Design

    MIPI CSI-2 to HDMI Reference Design includes the synthesizable MIPI-HDMI core design & stimulus generators, checkers, & a testbench necessary to simulate the design
    MIPI CSI-2 to HDMI Reference Design
  • ​​Avant MIPI-to-Parallel and Parallel-to-MIPI Bridges Reference Design​

    Reference Design

    ​​Avant MIPI-to-Parallel and Parallel-to-MIPI Bridges Reference Design​

    ​​The design allows quick interface for a processor with a MIPI DSI with an RGB interface, or camera with MIPI CSI-2 to a processor with parallel interface​
    ​​Avant MIPI-to-Parallel and Parallel-to-MIPI Bridges Reference Design​
  • DisplayPort, Scaler & Local Dimming Demonstration

    Demo

    DisplayPort, Scaler & Local Dimming Demonstration

    Lattice DisplayPort, Scaler & Local Dimming Demonstration implements upscaling the incoming video and controls the full LED array backlight of the Panel.
    DisplayPort, Scaler & Local Dimming Demonstration
  • Modular FMC Adapter and DisplayPort Daughter Cards

    Board

    Modular FMC Adapter and DisplayPort Daughter Cards

    The Modular FMC Adapter is the base board connecting the Lattice FPGA development kits through the FMC connector up to two transmitter & receiver boards.
    Modular FMC Adapter and DisplayPort Daughter Cards
  • CSI-2/DSI D-PHY Transmitter IP Core

    IP Core

    CSI-2/DSI D-PHY Transmitter IP Core

    The CSI-2/DSI D-PHY Transmitter Submodule IP is for applications requiring D-PHY transmitter in the FPGA logic & supports both high-speed & low power modes
    CSI-2/DSI D-PHY Transmitter IP Core
  • FPD-LINK Transmitter IP Core

    IP Core

    FPD-LINK Transmitter IP Core

    The FPD-LINK Transmitter Interface IP translates DSI video streams to LVDS interface for an FDP-Link connection to displays.
    FPD-LINK Transmitter IP Core
  • Lattice mVision MIPI Video Sensor to PCIe Bridge Demonstration

    Demo

    Lattice mVision MIPI Video Sensor to PCIe Bridge Demonstration

    This design demonstrates the functionality of transferring MIPI CSI-2 sensor video data to a computer through PCIe with a Direct Memory Access (DMA) engine.
    Lattice mVision MIPI Video Sensor to PCIe Bridge Demonstration
  • Lattice mVision MIPI Video Sensor to PCIe Bridge Reference Design

    Reference Design

    Lattice mVision MIPI Video Sensor to PCIe Bridge Reference Design

    Reference Design that shows transfer of sensor data to the computer memory and rendering of the data as video on the computer screen using the software driver.
    Lattice mVision MIPI Video Sensor to PCIe Bridge Reference Design
  • SubLVDS Image Sensor Receiver IP Core

    IP Core

    SubLVDS Image Sensor Receiver IP Core

    The subLVDS interface is primarily used in image sensors, integrating one clock pair and one or more data pairs.
    SubLVDS Image Sensor Receiver IP Core
  • CSI-2 PCIe Bridge Demonstration

    Demo

    CSI-2 PCIe Bridge Demonstration

    This design demonstrates the functionality of transferring MIPI CSI-2 camera video data to computer via PCIe with a Direct Memory Access (DMA) engine.
    CSI-2 PCIe Bridge Demonstration
  • MIPI DSI/CSI-2 to OpenLDI LVDS Interface Bridge for CertusPro-NX

    Reference Design

    MIPI DSI/CSI-2 to OpenLDI LVDS Interface Bridge for CertusPro-NX

    Modular MIPI/D-PHY Reference Design - MIPI DSI/CSI-2 to OpenLDI LVDS Interface Bridge reference design takes DSI or CSI-2 MIPI data and converts them to OpenLDI format on LVDS.
    MIPI DSI/CSI-2 to OpenLDI LVDS Interface Bridge for CertusPro-NX
  • N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation with CertusPro-NX

    Reference Design

    N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation with CertusPro-NX

    Modular MIPI/D-PHY Reference Design - Multiple channel image data concatenated horizontally line by line and offers up to eight-channel aggregation.
    N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation with CertusPro-NX
  • SLVS-EC to MIPI CSI-2 with CertusPro-NX

    Reference Design

    SLVS-EC to MIPI CSI-2 with CertusPro-NX

    Modular MIPI/D-PHY Reference Design - Support advance camera and display interconnections in mobile devices that enable higher performance sensor with optimized power.
    SLVS-EC to MIPI CSI-2 with CertusPro-NX
  • SubLVDS to MIPI CSI-2 Image Sensor Bridge with CertusPro-NX

    Reference Design

    SubLVDS to MIPI CSI-2 Image Sensor Bridge with CertusPro-NX

    Modular MIPI/D-PHY Reference Design - Solves the mismatch between SubLVDS output image sensor and an ISP/AP using CSI-2 interface.
    SubLVDS to MIPI CSI-2 Image Sensor Bridge with CertusPro-NX
  • Page 1 of 4
    First Previous
    1 2 3 4
    Next Last