Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type



Device Support
















Tags

































Providers
Clear All
  • RISC-V MC CPU IP Core

    IP Core

    RISC-V MC CPU IP Core

    The Lattice RISC-V MC CPU soft IP contains a 32-bit RISC-V processor core and optional submodules – Timer and Programmable Interrupt Controller (PIC).
    RISC-V MC CPU IP Core
  • RISC-V SM CPU IP Core

    IP Core

    RISC-V SM CPU IP Core

    Lattice RISC-V SM CPU IP core supports the RV32I instruction set, external interrupt, and debug feature, which is JTAG – IEEE 1149.1 compliant.
    RISC-V SM CPU IP Core
  • I3C Controller IP Core

    IP Core

    I3C Controller IP Core

    I3C Controller IP Core is a two-wire, bi-directional serial bus designed for use with many sensor secondary devices controlled by a single I3C controller.
    I3C Controller IP Core
  • I3C Target IP Core

    IP Core

    I3C Target IP Core

    I3C Target IP Core enables greater than 10-fold speed improvements, more effective bus power management, and backward compatibility with I2C devices.
    I3C Target IP Core
  • AHB-Lite Interconnect Module

    IP Core

    AHB-Lite Interconnect Module

    Propel IP Module: Fully parameterized interconnect for AHB-Lite systems - bus widths of 8 to 1024 bits, address widths up to 32 bits, 32 masters and 32 slaves.
    AHB-Lite Interconnect Module
  • AHB-Lite to APB Bridge Module

    IP Core

    AHB-Lite to APB Bridge Module

    Propel IP Module: Bridges high-speed AHB-lite to low-power APB. Data bus widths up to 32 bits. Address width up to 32 bits.
    AHB-Lite to APB Bridge Module
  • EFB Module

    IP Core

    EFB Module

    Propel IP Module: Implements the Embedded Function Block (EFB) in MachXO3D, including I2C, Configuration Blocks and User Flash Memory with an APB Interface.
    EFB Module
  • System Memory Module IP Core

    IP Core

    System Memory Module IP Core

    Propel IP Module: Configures Embedded Block RAMs or Distributed Memory interfaces and connects to the AHB-Lite bus.
    System Memory Module IP Core
  • UART IP Core

    IP Core

    UART IP Core

    Propel IP Module: Similar to NS16450 UART for serial communication supporting RS-232.
    UART IP Core
  • GPIO IP Core

    IP Core

    GPIO IP Core

    General Purpose Input/Output (GPIO) peripheral Soft IP is designed to control GPIOs via LMMI or APB.
    GPIO IP Core
  • SPI Controller IP Core

    IP Core

    SPI Controller IP Core

    Lattice SPI Controller IP Core is used to communicate with external SPI Target devices such as display drivers, SPI EPROMS, and analog-to-digital converters.
    SPI Controller IP Core
  • I2C Target IP Core

    IP Core

  • UART 16550 IP Core

    IP Core

    UART 16550 IP Core

    ​​Lattice UART16550 IP Core is designed for use in serial communication, supporting the RS-232, RS-422, RS-485, and Electronic Industries Association (EIA) standards, among others.​
    UART 16550 IP Core
  • LatticeMico32 Open, Free 32-Bit Soft Processor

    IP Core

    LatticeMico32 Open, Free 32-Bit Soft Processor

    A 32-bit Harvard, RISC architecture soft microprocessor, available for free with an open IP core license. Many compatible modules and IP are available.
    LatticeMico32 Open, Free 32-Bit Soft Processor
  • Lattice Mico8 Open, Free Soft Microcontroller

    IP Core

    Lattice Mico8 Open, Free Soft Microcontroller

    8-bit microcontroller primarilyi targeted to the MachXO2 and MachXO3 families, but portable to other FPGAs. Full 18-bit wide instruction set and 32 registers
    Lattice Mico8 Open, Free Soft Microcontroller
  • Platform Manager Utility Function Core IP

    IP Core

    Platform Manager Utility Function Core IP

    Supports Fault Logging and Enhanced Closed-loop Trim power management functions.
    Platform Manager Utility Function Core IP
  • Page 1 of 1
    First Previous
    1
    Next Last