• Home >
  • Lattice Solutions

Lattice Solutions

Everything you need to quickly and easily complete your design

Share This Result >

Narrow Your Results



Solution Type
Device Support
Tags
Providers
Clear All
  • Human Face Identification Reference Design

    Reference Design

    Human Face Identification Reference Design

    Uses a Convolutional Neural Network in the ECP5 FPGA to detect a human face, and match to known registered faces. Can be adapted to work with any other object.
    ECP5 / ECP5-5G, CertusPro-NX, CrossLink-NX 
    Object Detection, Object Identification, Lattice sensAI, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, UAVs 
    Human Face Identification Reference Design
  • ​​1 to N MIPI CSI-2/DSI Duplicator Reference Design​

    Reference Design

    ​​1 to N MIPI CSI-2/DSI Duplicator Reference Design​

    The 1 to N MIPI CSI-2DSI Duplicator reference design stream on one RX channel is duplicated and sent out on one to four TX channels.
    CrossLink, CrossLinkPlus, CrossLink-NX, CertusPro-NX, Avant-X 
    CSI-2, MIPI, Modular MIPI/D-PHY, Lattice mVision, DSI, Video Tx/Rx, AR / VR & Drones, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, UAVs, Automotive 
    ​​1 to N MIPI CSI-2/DSI Duplicator Reference Design​
  • PDM Microphone Aggregation

    Reference Design

    PDM Microphone Aggregation

    Aggregate up to 8 PDM microphones and connection to a processor over I2S or SPI with no impact in audio quality. Ideal for beam-forming. PCM output at 48HKz.
    iCE40 UltraPlus 
    Beam Forming, I2S, Microphone, PDM, Signal Aggregation, SPI, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, UAVs 
    PDM Microphone Aggregation
  • Infrared Remote Tx/Rx Reference Designs

    Reference Design

    Infrared Remote Tx/Rx Reference Designs

    Implements an interface to IR receive and/or IR transmit. This includes PWM (pulse width modulation) timing and protocol conversion to an SPI /I2C bus
    iCE40 LP/HX, iCE40 Ultra / UltraLite, iCE40 UltraPlus 
    I2C, Infrared LED, PWM, SPI, UAVs 
    Infrared Remote Tx/Rx Reference Designs
  • LED/OLED Driver Reference Design

    Reference Design

    LED/OLED Driver Reference Design

    Drive an LED via WISHBONE bus. Default is targeted to a GM1WA55311A LED but can be used to control other LEDs or OLEDs with similar functions.
    MachXO, MachXO2, MachXO3 
    LED Control, Wishbone, UAVs 
    LED/OLED Driver Reference Design
  • MIPI CSI-2 Receive Bridge

    Reference Design

    MIPI CSI-2 Receive Bridge

    Enables a mobile CSI-2 (Camera Serial Interface) image sensor to interface to an embedded Image Signal Processor. Up to 4 lanes at 900 Mbps per lane
    MachXO2, LatticeECP3, MachXO3, ECP5 / ECP5-5G 
    CSI-2, MIPI, Video Tx/Rx, Home Control Appliances & Security, IoT & Wearables, Notebooks & PCs, Printers, Smart Toys & Robots, Tablets, UAVs, Automotive 
    MIPI CSI-2 Receive Bridge
  • MIPI CSI-2 Transmit Bridge

    Reference Design

    MIPI CSI-2 Transmit Bridge

    Enables bridging of image inputs like subLVDS or HiSPI to MIPI CSI-2. Up to 4 lanes at 900 Mbps per lane
    MachXO2, MachXO3, LatticeECP3, ECP5 / ECP5-5G 
    CSI-2, MIPI, Parallel Video, Video Tx/Rx, UAVs, Automotive 
    MIPI CSI-2 Transmit Bridge
    • Page 1 of 1
    First Previous
    1
    		Next Last

    ABOUT LATTICE

    SALES

    SUPPORT

    FOLLOW