 |
 The ORT8850 devices offer a clockless, high-speed interface for interdevice communication on a board or across a backplane. The built-in clock recovery of the ORT8850 FPSCs allows for higher system performance, easier-to-design clock domains in a multiboard system, and fewer signals on the backplane.
The ORT8850 is available in medium- and high-density versions. While both feature 8 x 850Mbits/s high-speed interfaces, the ORT8850L offers up to 397K FPGA System gates and 278 user I/Os. The ORT8850H offers up to 899K FPGA System gates and 297 user I/Os.
Features
Embedded Core Features (Serial):
- Implemented in an ORCA Series 4 FPGA array
- Allows a wide range of high-speed backplane applications including SONET transport.
- No knowledge of SONET/SDH needed in generic applications. Simply supply data, 78 MHz�106 MHz clock, and a frame pulse.
- High-Speed Interface (HSI) function for clock/data recovery serial backplane data transfer without external clocks.
- Eight-channel HSI function provides 850 Mbits/s serial interface per channel for a total chip bandwidth of 6.8 Gbits/s (full duplex).
- HSI function uses the proven Lattice Semiconductor 850 Mbits/s serial interface core. Rates from 212 Mbits/s to 850 Mbits/s are supported directly (Lower rates directly supported through decimation and interpolation).
- LVDS I/Os compliant with EIA*-644, support hot insertion. All embedded LVDS I/Os include both input and output on-board termination to allow long-haul driving of backplanes.
- Low-power HSI core
- Low-power LVDS buffers
- Programmable STS-1, STS-3, and STS-12 framing
- Independent STS-1, STS-3, and STS-12 data streams per quad channels
- 8:1 data multiplexing/demultiplexing for 106.25 MHz byte-wide data processing in FPGA logic
- On-chip, Phase-Lock Loop (PLL) clock meets B jitter tolerance specification of ITU-T recommendation G.958.
- Powerdown option of HSI receiver on a per-channel basis
- Pseudo-SONET scrambler/descrambler
- HSI automatically recovers from loss-of-clock once its reference clock returns to normal operating state.
- Frame alignment across multiple ORT8850 devices for work/protect switching at OC-192/STM-64 and above rates
- In-band management and configuration through transport overhead extraction/insertion
- Supports transparent mode where the only insertion is A1/A2 framing bytes
- Streamlined pointer processor (pointer mover) for 8 kHz frame alignment to system clocks
- Built-in boundry scan ( IEEE 1149.1 JTAG)
- FIFOs align incoming data across all eight channels, two groups of four channels or four groups of two channels. Optional ability to bypass alignment FIFOs.
- 1 + 1 protection supports STS-12/STS-48 redundancy by either software or hardware control for protection switching applications. STS-192 and above rates are supported through multiple devices.
- ORCA FPGA soft intellectual property core support for a variety of applications
- Programmable STM pointer mover bypass mode
- Programmable STM framer bypass mode
- Programmable inverted data framing per channel
- Programmable CDR bypass mode (clocked LVDS high-speed interface)
- Redundant outputs and multiplexed redundant inputs for CDR I/Os allow for implementation of eight channels with redundancy on a single device.
ORT8850 Evaluation Boards
The ORT8850 FPSC Evaluation Board is a complete hardware kit that allows the user to evaluate the performance and characteristics of the ORT8850 device and aid in the development process.
View the ORT8850 Evaluation Board webpage.
|
|
Sign In
