The MachXO2 Pico Development Kit is a battery-powered, low-cost evaluation platform to accelerate the evaluation of MachXO2 PLDs. The kit features the MachXO2-1200ZE device, a 7-segment LCD display, I2C temperature sensor and an expansion header for I2C, JTAG, and GPIO interfacing.
Using the preloaded Environment Scanning system-on-chip (SoC) design provided with the development kit, you can now test within minutes, popular interfaces such as UART, SPI, I2C and LCD control using the integrated 8-bit LatticeMico8™ microcontroller in conjunction with the MachXO2 Embedded Function Bock (EFB). You can then build your own designs using the free downloadable reference design source code, implementing these features in less than an hour.
The board also features USB channels for JTAG programming and debugging from a host PC. The header provides access to a variety of I/O banks of the MachXO2 device and the on-board I2C bus. The board can be controlled with a menu driven interface via terminal programs running on a host PC.
| Download | |
|---|---|
| Windows Hardware Drivers RS-232/USB debug interface support for the MachXO2 Pico Evaluation Board. |
Windows Hardware Drivers |
| MachXO2 Pico Development Kit Documentation Complete documentation including the development kit QuickSTART guide, and User's Guide. |
|
| Demo Application A SoC-style demo application is included in the downloadable archive files. This demo includes the Verilog and VHDL source and firmware for the pre-programmed starter design provided with the MachXO2 Pico Evaluation Board. It uses the 8-bit Microcontroller (LatticeMico8), SPI, and SRAM controller reference designs to build a complete SoC (system-on-chip), which communicates with a host PC via the serial RS-232 cable. |
Demo Applications |
| Lattice Design Software To modify a demo or download your own designs into the MachXO2 Pico Evaluation Board requires Lattice design software (Diamond v1.2 or newer). To program the MachXO2 Pico Evaluation Board requires ispVM System |
Diamond |
| LatticeMico8 Reference Design & Development Tools To modify the LatticeMico8 microcontroller firmware of the MachXO2 Pico demo requires the LatticeMico8 Tools Code Revision 3.1. You may download it from the link on the right. |
Tools Code for Core Revision 3.1 |
| Reference Designs Access a broad range of reference designs optimized for the MachXO2 PLD family. The reference designs can be downloaded free of charge. |
Reference Designs |
| Schematic Design File PDF format schematics for the MachXO2 Pico Evaluation Board. |
Schematics |
© Lattice Semiconductor Corporation 2012
