The MachXO2 Control Development Kit provides a full featured development platform to prototype system control designs using MachXO2 PLDs. The kit features the MachXO2-1200HC device, a Power Manager II ispPAC-POWR1014A, 128Mbit LPDDR memory, 4Mbit SPI Flash and a microSD card socket.
Using the preloaded Control system-on-chip (SoC) design you can test within minutes board control functions such as power supply sequencing, reset distribution, power supply monitoring and data logging using the Power Manager II POWR1014A and 8-bit LatticeMico8™ microcontroller. Other downloadable demonstration examples for the MachXO2 Control Development Kit includes a Display Interface design. You can then build your own designs using the free downloadable reference design source code, implementing these features in less than an hour.
The board features USB channels for JTAG programming and debugging from a host PC. A 16x2 header provides access to a variety of I/O banks of the MachXO2 device and the on-board SPI and I2C buses. The board can be controlled with a menu driven interface via terminal programs running on a host PC.
Development Kit Contents
|
Ordering Part Number
|
| Download | |
|---|---|
| Windows Hardware Drivers RS-232/USB debug interface support for the MachXO2 Control Evaluation Board. |
Windows Hardware Drivers |
| MachXO2 Control Development Kit Documentation Complete documentation including the development kit QuickSTART guide, and User's Guide. |
|
| Demo Application A SoC-style demo application is included in the downloadable archive files. This demo includes the Verilog and VHDL source and firmware for the pre-programmed starter design provided with the MachXO2 Control Evaluation Board. It uses the 8-bit Microcontroller (LatticeMico8), SPI, and UART reference designs to build a complete SoC (system-on-chip), which communicates with a host PC via the serial RS-232 cable. |
|
| Lattice Design Software To modify a demo or to generate a programming bitstream of your own designs for the MachXO2 Control Evaluation Board requires Lattice design software (Diamond v1.2). To program the MachXO2 Control Evaluation Board requires ispVM System |
Diamond v1.2 |
| LatticeMico8 Reference Design & Development Tools To modify the LatticeMico8 microcontroller firmware of the MachXO2 Control demo requires the LatticeMico8 Tools Code for Core Revision 3.1. You may download it from the link on the right. |
Tools Code for Core Revision 3.1 |
| Reference Designs Access a broad range of reference designs optimized for the MachXO2 PLD family. The reference designs can be downloaded free of charge. |
|
| Schematic Design File PDF format schematics for the MachXO2 Control Evaluation Board. |
Schematics |
© Lattice Semiconductor Corporation 2012
