|
ispLEVER Starter is a complete design solution supporting the LatticeXP2, LatticeXP, LatticeECP2, LatticeECP/EC, and MachXO device families. It is comprised of the downloadable modules shown below, including Synplify for Lattice synthesis and Aldec's Active-HDL Lattice Web Edition RTL and timing simulator. These downloadable software components, when coupled with ispVM System and the latest LatticeMico32 Embedded processor, support complete design from concept to programming.
ispLEVER Starter is supported on the Windows Vista (32-bit), Windows XP or Windows 2000 operating system.
To design with Lattice CPLD and mature FPGA products, download the ispLEVER Classic software. You can install and run both ispLEVER Starter and ispLEVER Classic concurrently.
The ispLEVER Starter software was updated on 25-Jun-2009. It is concurrent with ispLEVER 8.0 release.
New Features
- ispLEVER 8.0 Starter now includes Synopsys® Synplify™ Pro synthesis software in addition to the previous Synplify™ synthesis
Follow the three steps below to pick Download, Install, and License ispLEVER Starter.
 |
|
Download an ispLEVER Starter Configuration
In order to make the download process as fast as possible and provide for flexible configurations, ispLEVER-Starter is organized into modular components. Refer to the table below to select the appropriate modules for the design environment you wish to build.
Download one or more modules from the list below and save each module to the Windows Desktop.
|
ispLEVER Starter Modules
| Module |
Device Support / Feature |
Download |
|
Primary Module: This is a required module to run the ispLEVER Starter software, and must be installed first. It includes the ispLEVER Project Navigator, and all the tools and device libraries you need to implement a design in Lattice's newest and most popular FPGA products.
Note: This module supports EDIF-type design projects only. For Verilog or VHDL design project support, you must download one of the Synthesis modules listed below. ispLeverDSP is now included as part of ispLever 7.2 SP2 Starter. To use ispLeverDSP with ispLEVER Starter, add the following paths into your System PATH environment:
|
FPGA
LatticXP2: All
LatticeECP2: All
(Does not include LatticeECP2S family)
LatticeECP: All
LatticeEC: All
LatticeXP: All
CPLD
MachXO: All
|
Primary Module (.exe 822MB)
|
Synplify Synthesis Module: This is an optional module that includes the Lattice version of the Synplify™ Pro synthesis tool from Synopsys®. This allows you to target and synthesize your HDL designs for Lattice CPLD and FPGA products. Supported HDL languages include; VHDL, Verilog 1995, Verilog 2001.
Due to US Export regulations, you must first request a download link by clicking the link at the right. The download link and instructions will be sent to you via e-mail separately.
To use a different third-party synthesis tool which you have installed separately, complete the following steps:
1. In Project Navigator, choose Options > Environment.
2. Select the Directories tab.
3. Under Synplify or Precision, click ... to browse to your synthesis tool.
4. For example, if you are using separately purchased Synplify Pro software, select SynplifyPro and clear the OEM checkbox.
5. Click OK. |
HDL synthesis |
Synplify Synthesis Module Request Form
|
|
Aldec Active-HDL Lattice Web Edition (LWE) Module: This is an optional module that adds the Active-HDL LWE simulation environment from Aldec.
To run Active-HDL Lattice Web Edition directly from the ispLEVER Project Navigator, perform the following after installation:
1. In Project Navigator, choose Options > Environment.
2. Select the Directories tab.
3. Under Active-HDL, click ... to browse.
4. Set the path to the directory in which Active-HDL Lattice Web Edition is installed (e.g. <isplever_strt_install_path>active-hdl) and click OK.
|
Simulation |
Aldec Active-HDL LWE (.exe 334MB)
|
 |
|
Install each ispLEVER Starter Module
Starting with the Primary Module, double-click the downloaded file(s), to start the installation procedure.
|
 |
|
License ispLEVER Starter
ispLEVER-Starter requires a valid software license. To obtain a license go to our licensing page to request a 6-month term license. License files are supplied by Lattice via email. Save the resulting license.dat file to <install_path>/License. Once licensed, ispLEVER-Starter is ready to run.
|
|
|
New Account
