Lattice FPGAs

General Purpose

Broad Range of Applications

• 

  ECP5 / ECP5-5G

  With a focus on compact, high volume applications, Lattice optimized ECP5 for low cost, small form factor and low power consumption. These characteristics make ECP5 ideal for delivering programmable connectivity to complement ASICs and ASSPs.

• 

  LatticeECP3

  LatticeECP3 was designed to offer an efficient FPGA with the benefits of SERDES. Need PCIe, HDMI, CPRI, JESD204, GbE or XAUI? No problem. When performance requirements are high, and size, weight or power is constrained, LatticeECP3 is perfect.

• 

  LatticeECP2/M

  With up to 95K LUTS, up to 5.3 Mbit block and distributed RAM, the LatticeECP2/M families integrate capabilities previously only found on higher cost FPGAs.

• 

  LatticeXP2

  LatticeXP2 devices combine up to 40K LUTs with non-volatile Flash cells to enable instant-on performance across a feature-set optimized for high-volume, low cost applications.

Video Connection

Video Bridging & Processing

• 

  CrossLink-NX

  Built on the Lattice Nexus platform, CrossLink-NX FPGA, featuring 10 Gbps MIPI D-PHY bandwidth, provides best-in-class power and performance for Embedded Vision and Edge AI applications.

• 

  CrossLinkPlus

  CrossLinkPlus FPGA features integrated flash memory, a hardened MIPI D-PHY and high-speed I/O for instant-on and flexible on-device programming capabilities. It provides world-class MIPI bridging solution for low power Embedded Vision applications.

• 

  CrossLink

  CrossLink combines hardened high-speed video interfaces, flexible high-speed IO, and IP for low power video bridgingapplications supporting LVDS, SLVS, SubLVDS, OpenLDI and RGB interfaces.

Ultra Low Power

World's Smallest Form Factor FPGAs

• 

  iCE40 UltraPlus – ML/AI Low Power FPGA

  Programmable solution that combines flexible I/O, a configurable architecture, and low power operation in a small form factor. Offering high performance “best-in-class” co-processor capable of highly parallel computing while simultaneously adding high levels of connectivity and support for a wide range of I/O standards and protocols.

• 

  iCE40 Ultra / UltraLite - Smallest, Lowest Power FPGA

  The iCE40 Ultra / UltraLite, the world’s most integrated mobility focused FPGA, brings you unsurpassed integration at breakneck development speed. It allows customers to upgrade current products or create completely new capabilities, while reducing power, cost, BOM, and size.

• 

  iCE40 LP/HX/LM - Low-power, high-performance FPGA

  With iCE40 LP/HX/LM FPGAs you can create ingenious mobile products while staying within your cost, power, size and schedule targets. These devices allow you to rapidly customize solutions with off-the-shelf chips. This means maximum product differentiation with minimum cost and effort.

Control & Security

Platform Mgmt & Security

• 

  MachXO3D – The Secure FPGA

  MachXO3D provides NIST SP 800 193 compliant Secure Control PLD functionality with Hardware Root-of-Trust and Dual Boot capabilities to simplify implementation of comprehensive, flexible and robust hardware security throughout the product lifecycle.

• 

  MachXO3 – Control and Bridging FPGA

  MachXO3 provides instant-on, non-volatile, small-footprint FPGAs (as small as 2.5 x 2.5mm). The family offers enhanced performance for bridging such as MIPI DSI/CSI-2 interfaces. The family has the highest I/O density in the lowest cost packages.

• 

  MachXO2 – Flexible Interface Bridging FPGA

  Designed to remove the complexity of choosing between CPLDs and low-capacity FPGAs, the MachXO devices offer glue logic, bus bridging, bus interfacing, power-up control, and control logic.

• 

  MachXO – Interface Bridging

  Designed to remove the complexity of choosing between CPLDs and low-capacity FPGAs – with glue logic, bus bridging, bus interfacing, power-up control, and control logic, you no longer need to choose.

• 

  Platform Manager 2 & L-ASC10

  Platform Manager 2 simplifies hardware management design, reduce design time, boost reliability and reduce BOM and cost by integrating power, thermal and control plane management into a single design. The entire design is implemented in software.

• 

  ispMACH 4000ZE

  The ispMACH 4000ZE CPLD family is ideal for ultra-low power, high-volume portable applications. The cost-optimized ispMACH 4000ZE family offers standby current as low as 10µA typical and ultra-small space-saving packages.

• 

  ispMACH 4000V/Z

  The ispMACH 4000V/Z family integrates up to 512 macrocells that support individual clock reset, preset and clock enable controls that operate at SuperFAST™ frequencies of up to 400 MHz.

Miscellaneous

Other Programmable Devices

• 

  Platform Manager 2 & L-ASC10

  Platform Manager 2 simplifies hardware management design, reduce design time, boost reliability and reduce BOM and cost by integrating power, thermal and control plane management into a single design. The entire design is implemented in software.

• 

  Power Manager II

  Power Manager II simplifies power management tasks like sequencing, reset generation, and controlling multiple power supplies. With Power Manager, you can reduce power management costs by up to 50%. Eliminate Flash corruption and cut your design time.

Lattice offers its programmable devices in many package options such as BGA, TQFP, and Lead Free, Halogen Free (RoHS Compliant).

If you do not see the part you are looking for please consult our Mature and Discontinued Devices page.