2.5Gb Ethernet MAC

IP ExpressThe 2.5Gb MAC core can support data rates of 1Gbps or 2.5Gbps in LatticeSC/M™ devices. The 2.5Gb MAC transmits and receives data between a host processor and an Ethernet network. The main function of the Ethernet MAC is to ensure that the Media Access rules specified in the 802.3 IEEE standards are met while transmitting and receiving Ethernet frames.

The data received from the GMII interface is first buffered until sufficient data is available to be processed by the Receive MAC (Rx MAC). The Preamble and the Start of Frame Delimiter (SFD) information are then extracted from the incoming frame to determine the start of a valid frame. The Receive MAC checks the address of the received packet and validates whether the frame can be received before transferring it into the FIFO. Only valid frames are transferred into the FIFO. The 2.5Gb MAC however always calculates CRC to check whether the frame was received error-free or not.

Features

  • Compliant to IEEE 802.3z standard
  • Generic 8-bit host interface
  • 8-bit wide internal data path
  • Generic transmit and receive FIFO interface
  • Full-duplex operation
  • Transmit and receive statistics vector
  • Programmable Inter Packet Gap (IPG)
  • Multicast address filtering
  • Supports
    • Full-duplex control using PAUSE frames
    • VLAN tagged frames
    • Automatic re-transmission on collision
    • Automatic padding of short frames
    • Multicast and Broadcast frames
    • Optional FCS transmission and reception
    • Optional MII management interface module
  • Supports jumbo frames up to 9600 bytes

The 2.5Gb MAC is a user-configurable IP core, which allows the configuration of the IP and generation of a netlist and simulation file for use in designs. Please note that generating a bitstream may be prevented or the bitstream may have time logic present unless a license for the IP is purchased.

Block Diagram

Performance and Size

Results for LatticeSC/M1
Mode SLICEs LUTs Registers sysMEM EBRs fMAX (MHz)
With MIIM_module 1008 1428 1032 1 125(-5, -6) / 312.5(-7)
Without MIIM_module 1168 1606 1186 1 125(-5, -6) / 312.5(-7)

1 Performance and utilization characteristics are in Lattice's ispLEVER® v7.0 SP1 software. When using this IP core in a different density, speed, or grade within the LatticeSC family or in a different software version, performance may vary.

Ordering Information

  • Ordering Part Number: 2PT5-MAC-SC-U1
Evaluate: To download a full evaluation version of this IP, go to the IPexpress tool and click the IP Server button in the toolbar. All LatticeCORE IP cores and modules available for download will be visible.

To find out how to purchase the 2.5Gb MAC IP Core, please contact your local Lattice Sales Office.

Documentation

Quick Reference
TITLE NUMBER VERSION DATE FORMAT SIZE
2.5Gb Ethernet MAC
8/07 New 8/20/2007 PDF 965.7 KB