February 2008A list of recently published documents, including descriptions and ordering numbers.
On-line versions of these publications are available on the Lattice website at www.latticesemi.com. Some documents are also available in print. To order print versions, call your local Lattice representative or Lattice's Literature Distribution Department at 1-888-477-7537 (outside the U.S. and Canada, call 503-268-8000) or order by FAX at 503-268-8556. In Europe, contact Lattice's European Literature Fulfillment Department by phone at +44 (0)117 934 1600, by FAX at +44 (0)117 934 1601 or by e-mail at euro.lit@latticesemi.com.
| Title | Description | Web | Order # | ||
|---|---|---|---|---|---|
| Data Sheets | |||||
| LA-ispPAC-POWR1014/A Automotive Family Data Sheet | Full specifications for Lattice's automotive grade in-system programmable power supply supervisor, reset generator and sequencing controller device. |  |
— | — | |
| LatticeSC/M Family Data Sheet | Updated specifications for Lattice's Extreme Performance, 90nm FPGA family. | |
— | — | |
| LatticeSC/M flexiPCS Data Sheet | Updated specifications for the embedded multiprotocol Physical Coding Sublayer in the LatticeSC/M FPGA. | |
— | — | |
| User's Guides | |||||
| Lattice PCI Express Demo Installation User's Guide | Describes how to install and run the various Lattice PCI Express demos. Instructions are included for installing the demo application, device driver and hardware evaluation board(s). Troubleshooting and uninstalling information is also provided. |
|
— |
— |
|
| Lattice PCI Express x4 Scatter-Gather DMA Demo Verilog Source Code User's Guide | Provides details of the Verilog code used for the Lattice PCI Express x4 Scatter-Gather DMA Demo. Instructions for building the demo design in ispLEVER Project Navigator are included as well as a review of the preference file used for the demo. |
|
— |
— |
|
| Lattice PCI Express x4 SFIF Demo Verilog Source Code User's Guide | Provides details of the Verilog code used for the Lattice PCI Express x4 SFIF Demo. Instructions for building the demo design in ispLEVER Project Navigator are included as well as a review of the preference file used for the demo. |
|
— |
— |
|
© Lattice Semiconductor Corporation 2012
