Design Services Viewer

ADI Engineering

ADI Engineering

1769A Worth Park
Charlottesville, VA 22911
Tel: (434) 978-2888
http://www.adiengineering.com
Experts in... CPLD and FPGA design, board-level digital and analog design, printed circuit board layout, embedded software development, integration and test, mechanical design, prototype and production manufacturing.

ADI Engineering is a full-service product solutions provider, offering world-class design capabilities, off-the-shelf reference designs and OEM platforms, and turnkey production across all volumes. Established in 1990, ADI offers comprehensive product realization services that can greatly reduce time to market, development expense and risk.
ADM Designs

ADM Designs

1018 Avocado Avenue
Escondido, CA 92026
Tel: (619) 906-7754
http://www.adm-designs.com
Experts in... Consumer (Low-cost, High-volume), Industrial, Aeronautic and Military Applications of Embedded Systems. Both Hardware and Software. Analog and Digital Circuits.

ADM Designs LLC provides top-notch analog, digital, microprocessor designs and related software, FPGA designs in VHDL and Verilog. Along with great customer support. A combination that can't be beat.
Aeronix

Aeronix

535 N. Pleasantburg Drive
Suite 114
Greenville, SC 29607
Tel: (864) 250-1950 ext. 277
http://www.aeronix.com
Experts in... Leading edge communications and high-assurance data acquisition technologies for a variety of aerospace, Government/DoD, industrial, and consumer electronics applications. Aeronix provides electronic, software, and RF design services from design centers located in Melbourne, Florida, and Greenville, South Carolina.

Design services include FPGA/PLD logic design and integration, analog/digital/mixed-signal board design and miniaturization, efficient power supply design, embedded processor and DSP firmware development, custom waveform and advanced antenna design, and wireless product development spanning 802.16 WiMax™, 802.11 Wi-Fi™, MIL-STD-188-220 VMF, and low-power RF solutions.
Arira Design Inc.

Arira Design, Inc.

Arira Design
2001 Gateway Place
Suite 500W
San Jose, CA 95110

Tel: (408) 789-2400
http://www.ariradesign.com
Arira Design is... The leading Electronic Design Services (EDS) firm, specializing in complex, highspeed board and system level design. Arira’s leading edge services include: System Architecture, Schematic Design, Signal Integrity Analysis and Simulation, Board Layout, Design Bring-up, Programmable Logic Design, Microcontroller Design Hardware & Software, & Firmware Hardware Init, BIOS, Device Drivers.
Astek Corporation

Astek Corporation

5055 Corporate Plaza Drive
Colorado Springs, CO 80919
Tel: (719) 260-1625 ext 100
http://www.astekcorp.com
Experts in... FPGAs, ASICs and board level solutions. Prototype platforms utilizing FPGAs, software and other hardware.

Astek is the largest independent electronic design center in the state of Colorado. We are nationally known for our engineering services and our ability to meet our customers' needs. FPGA design with extreme technical challenges are our specialty.
Axelsys

Axelsys

920 Auburn Ct.
Fremont, CA 94538
Tel: (408) 600-0871
http://www.axelsys.com
Experts in... providing high quality, low cost product development.

Axelsys, based in Silicon Valley with offices in Shanghai, China - employs only top-tier talent (all engineers have over 10 years experience) and couples proven process control to ensure the highest quality engineering

Axelsys offers a broad array of Electronic Design Services and Full Turnkey Deswww.logicpd.com cellpadding=/pign, which include Board Architecture Development, Schematics, Layout, Signal Integrity as well as FPGA / DSP / MCU coding, Software / Firmware Development and Mechanical Engineering.

Markets addressed include (but not limited to) Networking, Telecom, Industrial, Semiconductor, Video (IP and Broadcast).
BIT 7 Inc

BIT 7

100 Terrace Drive
Mundelein, IL 60060
Tel: (847) 566-0032 Ext 19
http://www.bit7.com
Experts in... FPGA Designs - High speed print engines, video test generation, LCD drivers, data translation, complex state machines.

Bit 7 makes products happen. As one organization, we offer all necessary components of the development process, from market research through design, including engineering, prototype and final product testing. Our fully equipped engineering / design teams include electronics, software, mechanical, and industrial design.

Our approach also offers the advantage of a single point of contact throughout the design process. This ensures superior communication and greater speed to market.

We offer our clients a tremendous resource of experience, ability, and product development know-how, and we offer it with an eye to consistent value and results.
Brio concept Consulting

Brioconcept

4593 Rue Louis-B.-Mayer
Laval (Quebec)
Tel: (450) 681-2779
http://www.brioconcept.com
Brioconcept, with its extensive experience in electronic design, can offer many solutions to tailor your needs. The strength of a diversified skill set of Brioconcept's competencies include hardware design, software design, firmware design and HDL design. Our experience spans many sectors including video broadcast, defence and security, industrial, medical and high speed communications to name only a few. Let Brioconcept be your design partner from your idea to production and we’ll provide peace of mind throughout your project.
CEI Logo

Colorado Engineering Inc. (CEI)

1915 Jamboree Drive, Suite 165
Colorado Springs, CO 80920
Tel: 719-388-8582
https://coloradoengineering.com
An industry leader in the design and development of high-performance computing and sensor solutions for the military and commercial markets. Extensive experience in embedded solutions (hardware and software), Digital Signal Processing (DSP), algorithms, and Artificial Intelligence (AI). Experts in Radio Frequency (RF) and Electro-Magnetics (EM) with experience up to 340GHz. Cross-trained engineers in hardware, software, RF, mechanical and systems providing a holistic approach to developing solutions. Hardware, Software, RF and mechanical engineers on staff, including PhDs in Electromagnetics and Artificial Intelligence (AI).
Creative Electronics

Creative Electronics

2519 Jadestone Court
Fort Collins, CO 80525
Tel: (970) 267-9752
 ce@ieee.org
Experts in... Lattice GAL, CPLD, and FPGA design using Verilog. DSP design using TI DSP. PCI, cPCI, and PXI platforms. Low Noise Analog and Mixed-Signal Design. Printed Circuit Board design and layout, both SMT and TH.

Since 1996, Creative Electronics has provided digital, analog, and mixed-signal printed circuit board designs for clients in the medical device, instrument, industrial control, and computer peripheral markets.
designlinx

DesignLinx

47 Technology Way, Suite 2E7
Nashua, NH 03060
Tel: (603) 566-2470
http://www.designlinxhs.com
DesignLinx Hardware Solutions brings deep, time-tested FPGA experience to help support your design team, and we are committed to getting you the results you need. We will help you reach production faster, with less risk, all at very competitive rates. The results are faster time-to-market, lower production costs and a competitive edge.

DesignLinx Engineers are FPGA experts who plug-in to your team as trusted advisors. We are a woman-owned small business, licensed and fully insured. Contact us today!
EnCADIS

EnCADIS Design

130 Kingfisher Drive
Middletown, NJ 07748
Tel: (732) 706-2974
http://www.encadis.com
Experts in... System and Sub-System Architecture, Electrical Design (Circuit board, FPGA / PLD, Backplane, Custom ASIC substrate), Fault Tolerant Design, Layout and Routing, Signal Integrity Analysis and Simulation, Component and System Simulation, High-speed design and layout (up to 10 Gb/s), FPGA based algorithms implementation, SONET/SDH, IP, Wireless.

EnCADIS design can assist implementing innovative product design solutions. We specialize in optimizing designs for cost, manufacturability, and reliability. Our team averages over 20 years technical experience ranging from large complex telecom/IP systems to high-volume consumer products. We can take you from concept to product in record time. Our team of experts can help define your system requirements and architecture, select an optimum implementation and deliver fully tested designs. Our FPGA/CPLD services include: Complete FPGA/CPLD development, Reusable FPGA cores, State machines, algorithms, & random logic, Design / Device Optimization and Simulation, and ASIC conversion support.
Focus Embedded

Focus Embedded

33 Cypress Blvd. Suite 400
Round Rock, TX 78665
Tel: (512) 246-9012<br> (888) FOC-7924
http://www.focusembedded.com
Headquartered in Austin / Round Rock, Texas, Focus Embedded has been providing cost-effective and reliable design solutions for FPGAs as well as embedded circuits, embedded firmware, and PCB layouts. Allied with (and located physically adjacent to) a contract manufacturer, Focus Embedded is extremely well positioned to do device prototyping, rapid turn development, and design for manufacture.

Focus Embedded engineers all have a minimum of 20 years experience, and several have nearly half a century. Our FPGA design specialties include video and communications systems as well as high speed memory management. We're additionally highly regarded as developers of USB devices and PCB layout designers for extremely high-speed impedance-controlled and time-of-flight-controlled boards.
GDA Technologies, Inc

GDA Technologies Inc

1010 Rincon Circle
San Jose, CA 95131
Tel: (408) 432-3090
Fax: (408) 432-3091
http://www.gdatech.com
Experts in... Designing ASICs, FPGAs, IPs, boards, SoCs, software and complete systems from concept to product. GDA has successfully developed products in the areas of desktop, server, and embedded computing, digital audio and video applications, Internet appliances, and voice and data networking applications. In the IP domain, GDA has been the leading solution provider for fast interconnects technologies such as PCI Express, HyperTransport, RapidIO, Ethernet and Advanced Switching with many licenses sold in compute, networking, and communication markets. GDA is headquartered in San Jose, California, and has satellite design centers in Boston, Sacramento, Irvine, Chennai, Bangalore, Kochi.

GDA Technologies Inc. is a leading Electronic Design Services (EDS) and Silicon Intellectual Property (SIP) solution provider for the embedded, networking, and consumer electronics markets.
MADS Inc

M.A.D.S

10 Commerce Park North
Bedford, NH 03110
Tel: (603) 644-7803 Ext 204
http://www.madsgizmos.com
Experts in... High quality designs utilizing state-of-the-art engineering resources. Our resources include: 3D Mechanical CAD, CPLD and FPGA Design and Simulation, Embedded Software Design, Windows Driver Development, PCB Layout and Simulation.

MADS is a full service electronics design and manufacturing company. We design and manufacture electronic products for the transportation, communications, medical and machine vision industries. MADS complements its clients' engineering and manufacturing capabilities. With our complete engineering staff and in-house prototyping and volume production equipment, we can assist with any phase of product development.
Neoventus Design Services

Neoventus Design Group, LLC

1000 Research Park Blvd
Suite 102
Charlottesville, VA 22911
Tel: (434)974-6199
http://www.neoventus.com
Experts in... All levels of hardware and firmware development – from system design to board-level design/layout, compliance testing, and design-for-manufacturing. Development skills include complex control and signal processing algorithms, FPGA / CPLD design and simulation, and complex PCB design.

Neoventus Design Group is a leading supplier of design services for the electronics industry. Focusing on embedded computing within the networking and medical industries, our team can provide full turn-key solutions or compliment our client’s in-house team with additional resources that include high-speed hardware and firmware design, and innovative control and signal processing algorithm development. Our team has more than 40 years combined experience in creating products as well as the manufacturing and test infrastructure required for success. As an employee owned company, Neoventus’ engineers are keenly and uniquely aware that their success is indivisible from the success of the client.
Nuvation

Nuvation

3590 N First Street
San Jose, CA 95134
Tel: (408) 228-5580
http://www.nuvation.com
Broad expertise across... Telecom, Datacom, Medical, Scientific, Test Measurement, Industrial Control, Mil-Aero, Semiconductor and Consumer Electronics Industries.

Nuvation provides electronic design services to Lattice OEMs globally. Our engineering facilities are in San Jose, California and Waterloo, Ontario. Design services include Lattice FPGA/PLD logic design and integration, signal integrity analysis, analog/digital/mixed-signal board design, custom power supplies, DSP, NPU and MCU firmware, device drivers and turnkey embedded system architecture and design.
Paragon Innovations

Paragon Innovations

3305 Matrix Drive
Richardson, TX 75082
Tel: (972) 680-2900
http://www.paragoninnovations.com
Experts in... Lattice CPLD and FPGA design solutions.

Paragon Innovations is a national product development company specializing in the design, development and documentation of custom embedded hardware and software in commercial and consumer technology products. Since 1990, the company's technology experts have leveraged Paragon's precise, rapid-product development, methodology and documentation processes to create quality embedded systems for the medical, oil & gas, video, internet, wireless, and semiconductor industries among others. Paragon uses an exclusive integrated approach that blends hardware and software processes with a manufacturing perspective. The company includes complete process documentation and client IP ownership as integral service deliverables.
presco

Presco, Inc.

8 Lunar Drive
Woodbridge, CT 06525
Tel: (203) 397-8722
http://www.prescoinc.com
Experts in... Image & Data Compression, High Speed Circuitry, Electronic Production, PCI Cards & Windows Drivers, FPGAs & Gate Arrays

If you have a challenging problem in electronic design, Presco might be the product development firm you need. Presco has the skills and experience to handle difficult design cycles. Our focus is on minimizing cost. We do this through algorithm development and aggressive utilization of Field Programmable Gate Arrays (FPGAs). This yields a shorter design cycle, lower cost, and a more reliable circuit. We excel at low-to-medium scale production of high performance surface mount modules. Presco has been in continuous operation for nearly 30 years with an exceptionally stable staff of professionals.
Silicon Spectrum, Inc

Silicon Spectrum, Inc

136 Harvey Road
Londonderry, NH 03053
Tel: (603) 626-0531
http://www.siliconspectrum.com
Experts in... All areas of FPGA, CPLD, PCB, Software and firmware development.

Silicon Spectrum Provides system and sub-system level architecture, FPGA and CPLD design (simulation, synthesis, and timing analysis), PCB (Design, Layout, Routing, and Signal Integrity Analysis and Simulation), High-speed design and layout, FPGA based algorithms implementation including Digital Signal Processing implementation.

Our specialty is the visual spectrum, including video and graphic processing as well as video transmission. We have an extensive portfolio of IP for both video and graphics, including software drivers for all major operating systems. All of our IP is optimized for FPGA implementation.

We also have IP and expertise in the following areas: Embedded Development, Hardware Acceleration Engines, Floating Point Acceleration, Audio/Video/Image processing, Mobile Computing, USB, Ethernet, PCI, PCI Express, LCD and Plasma Display controllers, CAN, MP3, H.264, DVI, PSWG, Display Port.
Softnautics Logo

Softnautics

4677 Old Ironsides Dr, Suite# 260,
Santa Clara, CA 95054
 info@softnautics.com
http://www.softnautics.com
Established 10 years ago in the hub of Silicon Valley, Softnautics has been accelerating customer execution by doing whatever it takes to help our customers ship their solution. Softnautics is a product solution company with expertise in VLSI IP and embedded software development. We develop custom IPs per our customer requirements as well as provide off the shelf ready to integrate IPs (e.g. USB 3.0). We offer a unique blend of critical components in development of an embedded systems. Our services include but not limited to design & development of hardware, software, firmware and application. Various companies in wireless, networking, streaming media and mobility domains is using our services. Our engineers with several vertical expertise work as an extension of your team to expedite your time-to-market, incorporate new technologies, and perform rigorous testing to assure quality of your products.
Sysacom R&D plus Inc.

Sysacom R&D plus Inc.

275 A, Pierre-Le Gardeur Blvd.
Repentigny, Qc,
Canada, J5Z 3A7
Tel: (450) 585-6396
http://www.sysacom.com
Sysacom is... a team of engineers, technicians and specialists working to develop our customers' next generation products since 1995. We design custom electronic circuits, systems and software. We design with Lattice ISPMACH 4000V using VHDL language. We also developed several FPGA designs. Type of projects range from glue logic, PWM generator, Hall Sensor decoder, LED and photodiode array, SPI interface, UART, ARINC-429 transceiver, SERDES, SONET/SDH interface, Viterbi, motor control and complex state machine using VHDL and Verilog language.
Talijon Engineering

Talijon Engineering

301 Moodie Dr., Suite 310
Ottawa, ON,
Canada, K2H 9C4
Tel: (613) 596-9998
http://www.talijon.com
Experts in... High-performance FPGA and Board design services and turnkey product development.

Talijon is an Electrical Engineering design services firm providing customers a full range of design services - from complete turnkey product development to more specific design services such as FPGA and Board development, software and firmware development, design analysis and system verification. Talijon is comprised of a team experienced in a wide range of design disciplines and very familiar with bringing new products from initial concept to production. Our services have been used in a broad range of markets and applications, including Telecom, Video/Imaging, Networking, and Biomedical.
Tecnova Electronic Software

Tecnova

2383 N Delany Rd.
Waukegan, IL 60087
Tel: (847) 662-6260
http://www.tecnova.com
Experts in... Lattice programmable logic, low level analog, digital circuits, microcontrollers, multilayer PC board design, embedded software, web pages, Windows .NET, USB, Ethernet, CANopen, 3D modeling, wireless 802.15.4 and ZigBee.

Our business is High-Tech product development. Tecnova provides complete design and engineering to take your project from concept through manufactured product. Tecnova offers extensive experience developing many types of products for automotive, industrial, medical, and consumer products. Our capabilities include: Electronic Hardware and PC Board Design, Wireless Connectivity, Mechanical Design, Embedded Software Development, Windows Software, LabVIEW, Custom Test Equipment, and low / mid quantity Manufacturing. We can update your existing product to add features, reduce cost, and be RoHS compliant, or design your next generation product for the global market place.
VectorBlox Logo

VectorBlox Computing Inc.

419-1080 Mainland St.
Vancouver, BC V6B 2T4
Canada
Tel: +1-604-566-9733
http://www.vectorblox.com
VectorBlox Computing Inc. specializes in efficiently mapping algorithms to FPGAs. We have experience with training and creating FPGA-based machine learning systems using CNNs and LSTMs. A founding member of the RISC-V foundation, whenever possible we strive to adopt an accelerated processor-based model, allowing the core algorithm to be programmed in C. This minimizes future hardware changes and results in an easier to maintain system.
wipro Logo

Wipro Limited

425 National Avenue, Suite 200,
Mountain View, CA 94043
Tel: +91 (80) 28440011
www.wipro.com
Wipro Limited (NYSE: WIT, BSE: 507685, NSE: WIPRO) is a leading global information technology, consulting and business process services company. We harness the power of cognitive computing, hyper-automation, robotics, cloud, analytics and emerging technologies to help our clients adapt to the digital world and make them successful. A company recognized globally for its comprehensive portfolio of services, strong commitment to sustainability and good corporate citizenship, we have over 160,000 dedicated employees serving clients across six continents. Together, we discover ideas and connect the dots to build a better and a bold new future.
Zephyr Engineering

Zephyr Engineering

1620 West Fountainhead Pkwy
Suite 320
Tempe, AZ 85282-1876
Tel: (480) 736-8714
http://www.ZPCI.com
Experts in... Digital image processors, cPCI I/O boards, high speed digital signal processing boards, memory controllers, security processors and serial protocol converters. In addition to many varieties of local buses, Zephyr engineers have experience with PCI, cPCI, PMC, VME and ISA boards and bus architectures.

Zephyr Engineering provides a wide range of custom hardware and software design services including FPGA design, coding and simulation (in both Verilog and VHDL); microcontroller hardware and firmware design; software driver design; and system documentation. Zephyr Engineering also provides turnkey contract design and manufacturing services for PCI, CompactPCI and PMC boards. From concept and schematic design all the way through PCB layout, parts procurement, assembly and final test, Zephyr can turn your ideas into real products.
Zeta

ZETA Electronic Design, Inc.

1303 Smyth Road
Hooksett, NH 03106
Tel: (603) 644-3239
http://www.zetainc.com
Experts in... Lattice CPLD and FPGA design solutions.

ZETA Electronic Design is complete, comprehensive electronics development. Clients need only supply a functional specification. From initial hardware/ software system design, to final unit build and test, ZETA has the resources, experience, and processes in place to assure swift, accurate realization.
Aizyc Technology Pvt. Ltd.

Aizyc Technology Pvt. Ltd.

6th Floor, Plot No:488 & 489
Ayyappa Society, Madhapur
Hyderabad 500081
India
Tel: +91 40 645 99770
Fax: +91 80 307 23630
http://www.aizyc.com
Experts in... Multi million gates FPGA porting, FPGA validation, FPGA product design, Design partition across FPGAs, Retarget Services, Proof of Concept Designs and FPGA Emulation Platform along with other ASIC , board design and Embedded/Firmware services.

Aizyc Technology is a Product Engineering & IP Core Company with proven competence in ASIC, FPGA, Systems & Embedded solutions. Our semiconductor IP portfolio includes SD 3.0 Host/Device, USB Host/Device, MAC, TCP/IP Offload Engine, MIPI, Nand Flash Controller and other Peripheral IPs. Domain expertise spans ARM based SoCs, Consumer Electronics, Industrial Solutions, Enterprise Networking, Personal Computer Products, Digital Imaging , Medical, Home automation and allied fields.
Arkus Inc.

Arkus Inc.

JR Ohmoto NK 3F, 10-7 Ohmoto-Ekimae
Kita-ku, Okayama City 700-0923
Japan
Tel: +81-86-225-1080
Fax: +81-86-225-1081
http://www.arkus.co.jp
Experts in... Design, manufacturing and system integration of embedded modules. We have rich experience using FPGA and CPUs; x86, ARM, SuperH and PowerQUICC. Wide varieties of customers are using our modules in their such systems as machining tools, medical equipment, factory automation, transportation, security systems, semiconductor manufacturing equipment, image processing systems, plant controls and laboratories.

Whether IP or experience of FPGA fields, ARKUS can provide DDR control, SERDES, lossless codec, image detail enhancement filter, bus bridge and image composition. Based on these technologies we offer the highest cost-performance embedded modules with shorter development terms.
Genetec Corporation

Genetec Corporation

BYGS Bldg 5F, 2-19-1 Shinjyuku, Shinjyuku-ku
Tokyo, 160-0022
Japan
Tel: +81-3-3357-3044
http://www.genetec.co.jp/index.html
Experts in... Hardware and Software Development, Mobile technology, Car navigation systems, and System integration

Since our founding in 1985, Genetec has functioned as "a total solution partner" by offering comprehensive system consulting and development services to a wide range of industries.

One of our main business fields is specializing in development of the embedded software that has a vital role in deciding the performance of products. We have especially rich experience in Mobile technology, Car navigation systems, and System integration.

Genetec also has extensive experience in Hardware development. Doing both "Hardware and Software" is what distinguishes Genetec from other Software corporations, by providing one-stop solutions to customers.

Genetec continues to meet our customers' progressively sophisticated needs in various industries with our advanced development skills.
iFlect

iFlect

Sector No 12 , Phase No 2
Nerul, Navi Mumbai 400706
Tel: +91-22-27722341
http://www.iflect.com
Experts in... Design, IP development, embedded system Design, PCB Design & ASIC Design with emphasis on quality deliverables. Our offerings are designed to function with minimal customer involvement, and the process ensures flawless and timely delivery. Design starting from specifications or point services.

IFlect Technologies offers design services in the area of FPGA Based product.
Manipal Dot Net

Manipal Dot Net

4-285K, 80 Badagabettu GP,
Shanthi Nagar, Manipal-Alevoor Road,
Manipal 576 104, Karnataka State, INDIA.
Tel: +91-820-2570792
http://www.manipal.net
Founded in 2004 by Dr. Narasimha Bhat (previously Director of R&D for FPGAs, Synopsys, Inc. USA), Manipal Dot Net Pvt. Ltd. (MDN) provides software development and hardware design services to offshore clients, mainly from the US and UK. We have been offering services in all spheres, ranging from Video surveillance, PCB design, AI/DNN, Computer vision/Image processing, Machine Learning, FPGA Design, Embedded systems and IoT.
NEXADAS

NEXADAS

3F, Dong Lian Business Building
Chuangye Road, 23rd Area of Bao'An District
Shenzhen City, 518102, Guangdong Province
China
Tel: +86-135 9015 1205
Fax: +86-755-2787 3253 Ext: 801
 Andrew.liu@nex-adas.com
http://www.nex-adas.com/index.html
The NEXADAS 360o HD/3D Surround View Monitoring Technology synthesizes images from four 190 degree ultra-wide-angle 720p AHD fish eye cameras to create a true HD/3D sophisticated view of a vehicle's surroundings by using Lattice FPGA and ARM CPU. The technology enables flexible omni-directional monitoring around a vehicle from a dynamically definable perspective or "free eye point." The NEXADAS SVM Technology can display the complete vision of the positioning and moving path of the car, it eliminates blind spot and thus works perfectly as a safe parking and driving guide even when restricted by adjacent vehicles and objects, parking line, etc. NEXADAS offers various SVM system configurations like -HDMI/VGA/AV with alternative version of 2D or 3D.
TANABIKI Inc.

TANABIKI Inc.

Kunitachi Shokyo Building 305
1-4-6 Higashi Kunitachi City
Tokyo 186-0002
Japan
Tel: +81-42-505-6272
http://www.tanabiki.com
Experts in... FPGA and CPLD design, digital and analog mixed signal circuit design, impedance managed pc-board design, and software development for embedded CPU, as well as producing of these designs and systems.

TANABIKI Inc. mainly develops broadcasting systems. Based on its expertise as a core, in video signal processing, audio signal processing and Flash memory controls, TANABIKI designs hardware and embedded CPU software which is capable of real time processing. From design to manufacturing stages TANABIKI offers optimized and high reliable hardware and software for systems, as well as minimizing production cost.
Tata Elxsi Ltd

Tata Elxsi Ltd

ITPL Rd
Whitefield
Bangalore
India
Tel: +91-80-2297-9123
http://www.tataelxsi.com
Experts in... Embedded Development, Board Design, Hardware Acceleration Engines, Glue logic development and synthesis, Audio/Video/Image/Speech Codecs, VoIP, RNS, Embedded Networking, Mobile Computing, NMS, Wireless, OHCI (1394), USB, Ethernet, PCI, PCI Express, Token Ring, PDH/SDH, Plasma Display Panel, LIN, CAN, MP3, H.264

Tata Elxsi is a technology company (part of the USD 18 Billion Tata group) with a distinct focus on design. It delivers outsourced product design and R&D services and solutions to customers worldwide, through a team of more than 2,000 engineers and designers. Tata Elxsi offers complete product design solutions. Our embedded product design services including hardware, software and embedded systems — across multiple technology verticals such as Automotive, Consumer & Office Products, Media, Networking & Communications, Scientific Instrumentations, Storage, Wireless and Semiconductor.
Theobroma Systems Design und Consulting GmbH

Theobroma Systems Design und Consulting GmbH

Gutheil-Schoder Gasse 17
A-1230 Wien
Austria
Tel: +43 1 2369893-0
Fax: +43 1 2369893-9
http://www.theobroma-systems.com
Experts in... Board and systems level design, hardware/software co-engineering, all levels of hardware and firmware development, Ethernet and network applications, operating systems design and customization, driver development, microkernel-based systems, embedded middleware, symmetric and asymmetric multiprocessing, industrialization and design-for-manufacturing/design-for-test, embedded software virtualization, high-assurance computing solutions and the Common Criteria methodology

Theobroma Systems takes your project beyond hardware and firmware development—our professional project management and tightly integrated partner network will be engaged for turnkey product realization.

We develop and market platform solutions for embedded high-assurance computing, perform design-house services for customer-specific embedded solutions, offer compiler engineering services with a focus on just-in-time translation and Java runtimes, and provide board-support services for semiconductor vendors.

Theobroma Systems is also a reliable partner for engineering products to attain a ISO15408 ("Common Criteria") certification.
wipro Logo

Wipro Limited

Doddakannelli, Sarjapur Road, Bengaluru - 560 035, India
Tel: +91 (80) 28440011
www.wipro.com
Wipro Limited (NYSE: WIT, BSE: 507685, NSE: WIPRO) is a leading global information technology, consulting and business process services company. We harness the power of cognitive computing, hyper-automation, robotics, cloud, analytics and emerging technologies to help our clients adapt to the digital world and make them successful. A company recognized globally for its comprehensive portfolio of services, strong commitment to sustainability and good corporate citizenship, we have over 160,000 dedicated employees serving clients across six continents. Together, we discover ideas and connect the dots to build a better and a bold new future.
Yamakatsu Electronics Industry Co., Ltd.

Yamakatsu Electronics Industry Co., Ltd.

541-4 Suenaga, Takatsu-ku
Kawasaki-shi, Kanagawa, 213-0013
Japan
Tel: +81-44-866-2411
http://www.yamakatsu.co.jp
Experts in... PC Applications, Communications and Radio, Image Processing, Audio Synthesis, Factory Automation Controllers, ASIC/FPGA Applications, PCB design and manufacturing, and Circuit Analysis Simulation.

Yamakatsu Electronics Industry has been a solution provider for 36 years in designing a wide variety of electronic circuits, units and its manufacturing, developing software, and designing pc boards and its production.
Abaxor Engineering GmbH

Abaxor Engineering GmbH

Abaxor Engineering GmbH
Porsestr. 8
39104 Magdeburg

Tel: +49 391 584 202 0
http://www.abaxor.de
Experts in... FPGA design and system engineering. Development skills include complex control and signal processing algorithms, FPGA design and simulation.

We development embedded devices including:

- Digital and Analog Board Design and Layout
- FPGA Prgramming and Debugging
- Embedded Software Development (Mico32)
- Digital Signal Processing (even non-linear) and Image Processing
- Analog Signal Conditioning and analog Amplifiers
- High Speed Interfaces (PCIe)
- co-Simulations with Matlab/Simulink or Spice
Ac6-formation

Ac6-formation

21, rue Pierre Curie
92400 Courbevoie
France
Tel: +33 (0)1 41 16 80 10
Fax: +33 (0)1 41 16 07 78
http://www.ac6-formation.com
Experts in... Training and technical support on embedded systems. Ac6-formation brings you its deep expertise in embedded systems both on the hardware and software levels as well as co-design problematics. Our training material is developped and maintained by our own trainers, that teach courses either in French or English. All trainings include comprehensive hands-on labs on Lattice tools and hardware.

We provide trainings on: VHDL programming, Soft-core system design, with exercises using the Lattice Mico32 processor, Programming Lattice FPGA products with ISPlever. The definitions of our courses was carefully defined to cover all the technologies used in your systems; our training rooms, located close to La Defense, Paris business district, allow us to guarantee a yearly schedule of courses on our own premises. Courses may also be held in your premises starting with a 4 people attendance.

However, embedded system desing and programming not only needs hardware skills, but also needs to be able to decide of th esplit of functions between hardware and software. Ac6-formation also provides courses covering system design technologies ranging from system design using UML and SysML, co-design strategies, software programming of embedded and real-time systems in C or C++ as well as operating systems for the embedded worls, Linux or Windows, drivers writing and OS porting, GUI programming, etc.
AcQ Inducom

AcQ Inducom

Rijnstraat 20, 5347 KN Oss
P.O. Box 627, 5340 AP Oss
The Netherlands
Tel: +31 412 641 922
Fax: +31 412 622 640
http://www.acq.nl
Experts in... Developing, producing and delivering of solutions for a wide range of embedded electronics applied in aerospace, military and industrial automation. In most cases this involves the design, building and delivery of embedded real-time hardware- and software components.

AcQ Inducom is certified to ISO 9001:2000 and is planning certification to AS9100 for Q2/08. The company has the know-how to set up a complete development project from A to Z, from the formulation of the problem via design and development to implementation and support, according ED80/DO-254 and ED12/DO-178B if required. Fields of knowledge include VMEbus, CompactPCI, PMC, PCI, M-module standards and MIL-STD-1553 (STANAG 3838/3910) units, as well as ARINC-429 and CANbus. Products are for example used in aircraft and -simulators, control systems for trams and trains, traffic control installations, wireless telecommunication networks, industrial automation and automotive. Worldwide sales are established both direct as well as through an international network of selected distributors.
af inventions GmbH

af inventions GmbH

Rebenring 33
38106 Braunschweig
Germany
Tel: (+49) 531 70211 390
http://www.af-inventions.de
Experts in... FPGA system design, intellectual property (IP) core implementation, third-party core integration, verification with high-end simulation tools, PCB board design and layout, and consultation.

Located in Braunschweig, Germany, we provide broad technical expertise and electronic development services tailored to your particular needs, with a focus on FPGA-based embedded systems.

As your strategic partner, we support you in your challenging projects with consultation and services suited to your requirements.

Our services at a glance:

- Hardware development and design
- FPGA development
- Electromagnetic compatibility (EMC) design
- Product optimization
- Project handling
- Consultation
AimValley

AimValley

Utrechtseweg 38, 1213TV Hilversum
P.O. Box 2194, 1200CD Hilversum
The Netherlands
Tel: +31 35 689 1900
Fax: +31 35 689 1901
http://www.aimvalley.nl
Experts in... telecommunication applications and systems for multi-service networks (SDH/SONET), optical transport (OTN), mobile backhaul (TDMoP) and carrier-class Ethernet.

AimValley provides design and consultancy services for FPGA and ASIC components, as well as hardware, embedded software design, and complete systems. The combined skill set represents all important aspects required for the development of complete systems that meet the demanding requirements of communications, industrial, and medical markets.
AmDATA A/S

AmDATA A/S

Bryggetorget 1,
0250 Oslo,
Norway
Tel: +47 23 11 55 90
http://www.amdata.no
Experts in... ispLEVER software, EDA tools like Exemplar's Leonardo, Synplicity, ViewLogic, Synopsys.

AmDATA has more than 10 years of ASIC / FPGA design experience and the resources in place to support your ASIC / FPGA requirements.
Arago Systems

Arago Systems

Arche des Dolines
5 rue Soutrane
06560 Sophia Antipolis
France
http://www.aragosystems.com
Experts in... electronic product development for embedded and harsh environmental conditions. Arago Systems has developed strong experience in the following domains: Microcontroller (e.g. ARM, AVR), Wireless communication, Embedded Linux, FPGA, Qualification & Certification and Industrial Applications
Axcon Aps

Axcon Aps

Diplomvej 381
2800 Lyngby
Denmark
Tel: +45 4822 9266
http://www.axcon.dk
Experts in... Advanced FPGA design, high-speed board-level digital design and signal integrity.

Axcon specializes in FPGA design and advanced hardware development, while offering full product development solution service including embedded software development, EMC, RF and analog design. Both out-sourcing of projects and in-sourcing of resources is available all over Denmark and southern Sweden. A series of training classes in FPGA design tools, techniques and coding is offered as well as a comprehensive 2-day signal integrity class. Example reference projects ranges from satellite Japanese communication and embedded supercomputing platforms develop mobile telecom test equipment to the more "odd" projects like the golf radar and the FPGA powered media sign. Reusable technology blocks include USB/FPGA solutions with Windows/Linux/Labview drivers, uCLinux running on soft-core CPU's in FPGA, high S/N high-speed ADC solutions etc.
brightONE Embedded Systems GmbH

brightONE Embedded Systems GmbH

Schertlinstr. 8, Geb. 7201
81379 München
Germany
Tel: +49 6196 7660 24241
Fax: +49 6196 7660 88300
http://www.brightONE.de
Experts in... Smart Products Engineering with a market focus on Automotive, Hi-Tech/Manufacturing and Medical Devices industries.

With more than 20 years experience brightONE is a reliable Full-Service-Provider offering design services ranging from integrated HW & SW development of complete devices to specific high-tech consulting – the solutionizer for smart technology.

Hereby brightONE supports customers to capture the benefits of the Connected World to reach new markets and realize their real potential through innovations. Key technologies are, e.g., Connectivity solutions with M2M/High-Speed Connectivity (from NFC to WAN), e-Mobility (Battery and Power-Management) and Functional Safety (IEC 61508, EN 5012x and ISO 13485/62304).

brightONE Embedded Systems' competence stack ranges from concept studies, PCB design & layout via FPGA development up to firmware and application-specific software which enables accountability for integrated HW & SW projects. Specific high-tech consulting capabilities cover, e.g., signal integrity, EMI and power integrity analysis, thermo and acoustic noise design as well as high-speed design, layout and modeling. Regarding FPGA technology, brightONE successfully supported several customers with their very first FPGA-based projects.
CEFRIEL

CEFRIEL

Fucini 2,
I-20133 Milan,
Italy
Tel: +32 02 23954 1
http://www.cefriel.it
Experts in... Embedded Systems Design, Automation and Control, Software Engineering, Data Management, Middleware, Networks, Multimedia Processing, Wireless and Wire line and Microelectronics.

Since 1988, we have been active as one of the main centers for technology transfer in the field of Information and communication Technology, becoming one of the leading Italian actors in ICT research innovation and education. We develop, evaluate and experiment with new forms of technology in an innovative approach to problems, establishing a unique multidisciplinary body of knowledge. We create new knowledge and develop ICT concepts and applications to solve real-world problems. CEFRIEL supports technology transfer for industries and public administrations to find out pioneering solutions for the present and the future.
DATA RESPONS A/S

DATA RESPONS A/S

Ellekar 6
DK-2730 Herlev
Denmark
Tel: +45 88 32 75 00
http://www.datarespons.com
Experts in... Embedded software and electronics, FPGA design and HDL design.

Data Respons is specialized in development of electronics and embedded software. In close cooperation with progressive Danish and international companies we develop innovative products within the mobile, telecommunication, medico-technical, energy, industrial and transport sectors. FPGA design is an integrated part of these activities from specification to realization. Data Respons has experience with all aspects of HDL design - embedded controller solutions, signal processing, gigabit communications, SoCs etc. Data Respons employs more than 50 engineers, and maintains a growing network of technical specialists and business partners.
Dekimo

Dekimo

Brusselsesteenweg 708,
B-9050 GENT,
Belgium
Tel: +32 9 231 07 90
http://www.dekimo.be
Experts in... Telecom, railway applications, automotive, custom design, wireless, power electronics.

Dekimo is a supplier of software and hardware engineering. We develop custom-made software for PC Platforms, embedded software for microcontrollers, DSP's and FPGA's; the complete cycle of electronic equipment (schematics, PCB-design and prototyping).
Dream Chip, GmbH

Dream Chip, GmbH

Steinriede 10
30827 Garbsen
Germany
Tel: (+49) 5131 90805 131
http://www.dreamchip.de
Experts in... Technology and Products for Video and Imaging Solutions

Dream Chip Technologies (DCT), located in Garbsen in Northern Germany, near the CeBIT town Hanover, is an independent microelectronic engineering company with a long history in embedded Software, FPGA, System on Chip (SoC) and PCB development especially for 2D/3D video and imaging applications.

Founded more than 20 years ago as SICAN and belonging as SCI-WORX to Infineon, DCT comes today with outstanding engineering knowledge and comprehensive experience in the development of challenging microelectronics. Manufacturers for industrial, automotive, surveillance, professional video, medical and also consumer products rely on our expertise and engineering skills.

Our mission is the fast development and delivery of innovative and competitive technology as well as of market-driven products. By doing so we enable our customers to launch their new products without having to neglect their core business. This strategy ensures business stability and steady growth through product innovations at the same time.
Electronic Design Alliance

Electronic Design Alliance

11 rue du clos Courtel 35700
Rennes, France
http://www.electronic-design-alliance.com
Combines... complementary expertise to guarantee a successful development of complex digital electronic systems. Strong with industry and technology experience, flexibility, and a culture of result. EDA is an answer to the following needs:

- Prototyping for concept validation.
- System design in a customized environment.

The areas of competencies of Electronic Design Alliance are:

- Digital Broadcasting (DVB, ATSC, DAB),
- Wireless access networks (IEEE 802.xxx),
- Image and audio processing (MPEG),
- Data encryption (CSA, AES, DES),
- Telecommunications (Ethernet, ATM, IP)
Enciris

Enciris Technologies

42, avenue de lEurope
81600 Gaillac,
France
http://www.enciris.com
Experts in... HD and SD video compression, acquisition and processing for the medical, industrial, aerospace, broadcasting and videoconferencing markets. We design high speed Lattice FPGA based solutions optimized for both cost and performance.

We have significant expertise in developing IP. We have created our own video processing IP specifically for Lattice FPGAs. This IP is available for licensing and can be modified to meet your specific requirements. Our catalog includes powerful FPGA cores for H.264 and VC-1 HD video compression, video filtering, de-interlacing, down and up scaling, etc.

In addition, we produce a number of standard video acquisition and compression boards incorporating Lattice FPGAs. These products, which include demo software and drivers, can moreover be used as evaluation platforms.

Using our design capabilities we can develop a custom board or modify an existing one for you. We can supply design files, manufacture prototypes and can even handle production quantities.
Enclustra GmbH

Enclustra GmbH

Technoparkstrasse 1
CH-8005 Zürich
Switzerland
Tel: +41 43 343 39 43
http://www.enclustra.com
Experts in... FPGA-based System Design, FPGA HW, FPGA HDL, FPGA embedded SW, FPGA Modules, FPGA IP Cores, DSP, SoPC, Network Technologies, Field Bus, Audio/Video, Motion Control, Full Linux on FPGA

As an FPGA Design Center, Enclustra provides services covering the whole range of FPGA-based system development: From high-speed hardware or HDL firmware through to embedded software, from specification and implementation through to prototype production.

As an FPGA Solution Center, Enclustra develops and markets highly-integrated FPGA modules and FPGA-optimised IP cores. By specialising in forward-looking FPGA technology, and with a broad application knowledge, Enclustra can offer ideal solutions at minimal expense in many areas.
Helion GmbH

Helion GmbH

Bismarckstrasse 142
47057 Duisburg-Neudorf
Germany
Tel: +49 203 509496-0
Fax: +49 203 509496-10
http://www.helionvision.com
Experts in Lattice FPGA design, FPGA and DSP based CMOS image sensor setup (Aptina, BAE, CMOSIS, OmniVision, OnSemi, Sony, ....) and image (pre)processing.

Implementation and design of advanced IP-Cores for real-time image pre- and post-processing in Lattice FPGA products, HD formats (e.g. BT1120, 720p), providing SoC-like image sensors functions (e.g. Debayer, Auto Exposure, Auto White Balancing, Dewarp, High Dynamic Range Imaging (HDRI), ...) Engineering Services for cost effective and fast time to market camera developments.

Helion offers individual trainings and gives you also consulting and project support with Lattice FPGA and pASSP products: MachXO, MachXO2, MachXO3, LatticeXP2, LatticeECP, LatticeECP2, LatticeECP2M, LatticeECP3, ECP5, and CrossLink. Development platforms (Vesta-Series) are also available.
INDEEP

INDEEP

Headquarters - Annecy
Parc Altais
27 rue Cassiopée
74650 Chavanod, France
Tel: +33 (0)4 50 10 43 89
http://www.indeep.fr
Experts in... Embedded applications for Industrial engineering, Aerospace and Defense, Telecommunication and Automotive markets.

The INDEEP company provides our customers with an easy, cost effective and fast access to custom embedded electronics and software solutions. With more than 40 years of combined professional experience in the major embedded electronic applications, we can use this very valuable know-how to help you turn your needs into reality through a tailored electronic solution. Thanks to our partnerships, we can manage all the steps of the project, from the requirements specification up to the manufacturing.
IRCONA

IRCONA

College Business and Technology Park,
Blanchardstown,
Dublin 15
Ireland
Tel: +353 (0)1 811 5300
http://www.ircona.com
Experts in... High-speed processor-based design for Servers, Single Board Computers, Embedded Processing, Communications, Remote Management (embedded within products) and High Reliability. These markets cover Telecom, Computing and Medical Equipment. We offer support from the concept stage all the way through the product life cycle as required by our customers.

IRCONA have been responsible for delivering a range of complex products to market both on time and to plan. These products have generated in excess of $400M in revenues over the past eight years. We have worked with customers throughout the world, including Europe, USA and Japan, in providing Specialized Design Services. We work at the leading edge of technology and have built a reputation that enables access to key technologies for joint development, licensing and supply, ensuring rapid time to market and volume ramp.

We have developed a reputation for delivering disruptive products to various markets on time and to plan, setting global standards for high quality of design.
Knowledge Resources GmbH

Knowledge Resources GmbH

Uhlandstrasse 10
CH 4053 Basel
Switzerland
Tel: +41 61 545 2080
http://www.knowres.ch
Experts in... CPLD & FPGA design, high speed PCB layout, RF design (ISM Band radio modems & TV tuner designs), Video Processing (Pal/NTSC, HD formats, SDI, VGA to UWXGA and beyond in FPGA fabric), embedded processing & distributed (mesh) systems.

At Knowledge Resources GmbH we believe in using the right tool for the task at hand in order to obtain the best results for the least amount of cost. This philosophy is reflected in our modern test equipment pool, the use of Lattice FPGA’s, and the most up to date software tools available. We offer turn key solutions and services to complement your in house design team.

Allow our experienced team to compete for your next design project, and you will be pleasantly surprised.
MikroProjekt d.o.o.

MikroProjekt d.o.o.

Aleja Blaza Jurisica 9
10040 Zagreb
Croatia
Tel: +385 1 2455 659
Fax: +385 1 2455 659
http://www.mikroprojekt.hr
Experts in... FPGA logic design, PCB design, Embedded and application software development with focus on displays, video and image processing, graphics, and 3D display technologies.

Mikroprojekt combines more than 10 years of experience in display and visual applications with expertise in FPGA logic design, embedded processing and high performance embedded software, to create the platforms for next generations of video and display technologies. We offer IP cores, development boards, and engineering services in the areas of FPGA logic design, PCB design and software development — from solutions to specific problems and design issues to full turnkey product development.
Mixed Mode GmbH

Mixed Mode GmbH

Lochhamer Schlag 17,
D-82166 Gräfelfing,
Germany
Tel: +49 / 89 / 89868-200
http://www.mixed-mode.de
Experts in... Automotion Systems, Medical Solutions, Automotive Systems, Telecommunication Software.

Building on our extensive know-how in hard- and soft-ware, we offer support for all phases of your project, from conception through realization to test and integration. We also take on complete projects right up to system solutions. We are specialists in developing communication and embedded realtime applications, vital aspects for development in current industrial applications.
Prevas A/S

Prevas A/S

Frederikskaj 6
DK-2450 København SV
Tel: +45 33159090
http://www.prevas.dk
Experts in... Integrating microprocessor and DSP systems into FPGA solutions.

For more than 20 years, Prevas has developed intelligence in products and industrial systems. With 500 developers (70 in Denmark), all focused on delivering profitable solutions for the future, Prevas is not only the leading development company in Denmark but in the entire Nordic region. Prevas A/S offers on-site specialists as well as project and product development from concept to production. Core competencies include all active technologies within electronics development and software, such as ARM, Linux, Windows CE, DSP, FPGA, VHDL and HMI. Additionally, Prevas A/S offers a range of well documented and flexible technology platforms, in order to achieve rapid development time and maximal end product stability. Prevas A/S resulted from the merger of IO Technologies A/S and Glaze A/S, and maintains two design centres, in Århus and Copenhag
Sital Technology

Sital Technology

17 Atir Yeda St.
Kfar-Saba, Israel 44643
Tel: +972-9-7633300
Fax: +972-9-7663394
http://www.sitaltech.com
Experts in... communication bus applications in the avionics, aerospace and automotive industries.

Sital embeds its vast experience and proficiency in its products which include the widely used Mil-Std-1553 and ARINC 429 IP cores, components, boards and testers, as well as uncommonly used protocols like H009, WB194 and French DigiBus. Sital also provides CAN bus testing devices and applications. Sital's Mil-Std-1553 MINUET components are based on pre-programmed Lattice XP-2 devices.

Sital's formidable customer list includes leading military and commercial organizations throughout the world. Among them are NASA, USAF, BAE, Raytheon, Honeywell, Thales, ESA, ECIL(India), Aselsan, Elbit, Rafael, Israeli Aerospace Industries (IAI) and many others.
Tachysséma

Tachysséma

25, av Ingine
31750 Escalquens,
France
Tel: +33 9 75 38 74 11
Fax: +33 6 18 99 26 82
http://www.tachyssema.com
Experts in... Digital high speed FPGA design and parallel architecture, stand alone embedded programmable logic devices, system design and integration geared toward real time signal processing, and complex CAD.

Building on a strong experience in embedded logic design, image and video processing, system integration for the medical,aeronautic/military, and scientific markets, Tachysséma offers service and consulting expertise from conception to prototypes.

The Tachysséma Xe module, built around the Lattice XP2 FPGA, offers a compact solution optimized for advanced data processing and embedded applications. The Xe module can be plugged on a motherboard via the standard peripheral connector or soldered directly to the motherboard
tecVenture

tecVenture

Georg-Schumann-Straße 190
D-04159 Leipzig
Germany
Tel: +49-(0)341-462 77710
Fax: +49-(0)341-392 87469
http://www.tec-venture.de
Experts in... All domains of hardware and software embedded engineering and VHDL/FPGA design. This incorporates the conception, design, development and test of electronic equipment, software for embedded systems like BIOS, LINUX-, Android and Windows-Drivers, adaption of embedded Operating Systems and VHDL/FPGA designs for IP Cores and SoftCore processor designs. Furthermore we accompany the whole life cycle of your product starting from prototypes/small series to large scale production in electronic assembly.

tecVenture supports you in all matters relating to the development of electronics and FPGA. We will advice you about the state-of-the-art technology and turn your visions into reality. Our service also includes documentation, prototyping, solutions for obsolescence issues, pre-evaluation, debugging, code review and testing, for example.

In addition, we cooperate with strong partners, to transfer your solution into production.

Your vision, our challenge!

We can offer references in aerospace, medical technology, automation, instrumentation, defense, automotive and many more with german quality and engineering skills to a reasonable price.
Telnet Group

Telnet Group

Parc Technologique
2083 Cité la Gazelle-Tunis (Tunisie)
Tel: (+216) 71 858 055
http://www.groupe-telnet.com
Experts in... Embedded software, integrated systems development/computing platforms, electronic & microelectronic design services in Telecommunications, Multi-Media, Automotive, Security, Defense/Avionics, Point of Sale, Industrial & Information System markets.

Established in 1994, the Telnet Group provides design services at 5 locations in France and North Africa including: digital, analog and mixed Electronic Design, High speed and RF board design, schematic capture and editing, electrical rules checking, EMC compliance, SI verification, components footprint drawing, PCB-manual and automatic routing, CAM & Gerber Manufacturing output files.
Westwood Rock Limited

Westwood Rock Limited

92 Westwood Green
Cookham
Berkshire
SL6 9DE
United Kingdom
Tel: +44 (0)1628 850798
Fax: +44 (0)1628 810845
http://www.westwoodrock.com
Experts in... All aspects of electronic product design and IP development including firmware, hardware, software and system design services. We support analogue, PLD, CPLD, FPGA and ASIC technologies from a wide range of vendors, in designs from DC though high speed digital to RF.

Established in 1999, Westwood Rock has designed products for every environment from the home to the car, broadcast, industrial, medical, aircraft and into space.

We can help with anything from a small circuit to a PCB or complete system, from a small IP block to a system on a chip. Working for clients ranging from individual entrepreneurs to small businesses and international companies, including semiconductor manufacturers, our experienced engineers have an extensive skills set covering a broad spectrum of data and signal processing designs, including professional audio and video. In 2010 Westwood Rock released the first multiplatform IP core for the Dirac PRO (SMPTE VC2) compression standard; a very low delay, flexible and small form factor video codec.

About Us

 

Sales

  

Support

  
 
 
 
 
 
 
Lattice QR code