Lattice Solutions

Everything you need to quickly and easily complete your design

Solution Type

Device Support




Tags







Providers
  • ispPAC-POWR607 Evaluation Board

    Board

    ispPAC-POWR607 Evaluation Board

    For evaluation and development with the isp-PAC-POWR607 device in a 32-QFN package
    ispPAC-POWR607 Evaluation Board
  • Supervisor, WDT & Reset Generation with ProcessorPM

    Reference Design

    Supervisor, WDT & Reset Generation with ProcessorPM

    Implements two Power Management reset generation and watchdog timer, controlled by six analog voltage monitor (VMON) inputs and input/configuration pins.
    Supervisor, WDT & Reset Generation with ProcessorPM
  • POWR1014A Breakout Board

    Board

    POWR1014A Breakout Board

    A simple low-cost board that provides complete I/O access to the Power Manager II (POWR1014A)+LEDs, Prototyping area and more.
    POWR1014A Breakout Board
  • POWR607/6AT6 Evaluation Board

    Board

    POWR607/6AT6 Evaluation Board

    For evaluation and development with both POWR607 and POWR6AT6.
    POWR607/6AT6 Evaluation Board
  • Power Manager II Fault Logger

    Reference Design

    Power Manager II Fault Logger

    Records the supply fault condition in non-volatile memory so the fault(s) can read back at some later time
    Power Manager II Fault Logger
  • Power Supply Fault Detection

    Reference Design

    Power Supply Fault Detection

    Records the supply fault condition in non-volatile memory so the fault(s) can read back at a later time
    Power Supply Fault Detection
  • Redundant Power Supply Management

    Reference Design

    Redundant Power Supply Management

    Uses a Lattice Power Manager II device to achieve Redundant Power Supply Management using the power supply OR’ing technique
    Redundant Power Supply Management
  • AMC Power Module Management

    Reference Design

    AMC Power Module Management

    Describes the use of a Lattice Power Manager II device as a Payload Power Management Coprocessor in an Advanced Mezzanine Card (AMC) system
    AMC Power Module Management
  • 12V Hot Swap Control

    Reference Design

    12V Hot Swap Control

    Demonstrates how a Power Manager II ispPAC-POWR1220AT8 can be used to implement the functions required for +12V hot-swap applications
    12V Hot Swap Control
  • 5V & 3.3V Hot Swap Controller

    Reference Design

    5V & 3.3V Hot Swap Controller

    Implements a hot swap controller design within a Power Manager II mixed-signal PLD
    5V & 3.3V Hot Swap Controller
  • PAC-POWR1220AT8 Development Kit

    Board

    PAC-POWR1220AT8 Development Kit

    No longer available - for reference only. Basic evaluation and prototyping with the ispPAC-POWR1220AT8 device + 100-pin TQFP package + Pads for user I/O, I2C...
    PAC-POWR1220AT8 Development Kit
  • Power Manager II Hercules Development Kit

    Board

    Power Manager II Hercules Development Kit

    No longer available - for reference only. For Power Manager II evaluation and development + Emulate power supply monitoring, temperature monitoring...
    Power Manager II Hercules Development Kit
  • ProcessorPM Development Kit

    Board

    ProcessorPM Development Kit

    No longer available - for reference only. Low-cost platform for evaluating and designing with the ProcessorPM (605 and 6AT6) power management device.
    ProcessorPM Development Kit
  • ispPAC-POWR1208P1 Evaluation Board / Development Kit

    Board

    ispPAC-POWR1208P1 Evaluation Board / Development Kit

    No longer available - for reference only. Quickly configure and evaluate the ispPAC-POWR1208P1 on a fully assembled printed-circuit board. + 44-pin TQFP.
    ispPAC-POWR1208P1 Evaluation Board / Development Kit
  • Page 1 of 1
    First Previous
    1
    Next Last
    Like most websites, we use cookies and similar technologies to enhance your user experience. We also allow third parties to place cookies on our website. By continuing to use this website you consent to the use of cookies as described in our Cookie Policy.